• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.367-375
• /
• 2006

Sequencing Batch Reactor (SBR) is well adopted for community wastewater treatment for its simplicity, performance and various advantageous treatment options. SBR is now drawing attention for its process modification such as coupled with membrane bioreactor, reverse osmosis or applying different media to achieve high removal efficiency. This study focused on the improved efficiency of carbon, nitrogen and phosphorous removal by applying zeolite materials called bioceramics to the SBR. Two laboratory-scale SBR units were operated in the same operating conditions - one with bioceramics called Bioceramic SBR (BCSBR) and the other without bioceramics used as control. Routine monitoring of COD, TP, $NH_3-N$, $NO_3-N$ was performed throughout this study. COD removal was about 80% to 100% and phosphorous removal was about 60% in the process whereas $NH_3-N$ removal efficiency was found to be 99.9% in the BCSBR unit. Addition of bioceramics also improved sludge characteristics such as sludge dewaterability, specific gravity and particle size. BCSBR can withstand high ammonia shock loading leading to the better treatment capacity of high ammonia containing wastewater. The cause of improved removal efficiencies within the biological reactor could be attributed to the biochemosorption mechanisms of bioceramics. Absorption/adsorption or desorption capacity of bioceramics was tested through laboratory experiments.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.311-320
• /
• 1990

Hydroxyapatite powders were synthesized with Ca/P=1.67, 1.70 and pH=7, 11 by precipitation method and fluorine substituted hydroxyapatite ceramics were prepared using these powders. After characterization of these hydorxyapatite bioceramics, chemical bonding between these sepcimens in simulated body fluid was investigated. Bysubstitution of 7.5% of fluorine, hydroxyapatite was prevented to decompose into β-tricalcium phosphate and its sintered density and mechanical strength were increased. The bending strength of these hydroxyapatite ceramics was 137MPa. The hydroxyapatite ceramics chemically bonded each other in Ringer's solution and the component of bonded layer was also hydroxyapatite.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.649-653
• /
• 1996

Imnmobilization characteristics of Thiobacillus sp. IW which oxidizes sulfur compound was studied to use the bacterium in odor controlling equipment for the future. The optimum growth conditions for Thiobacillus sp. IW were pH7, $30^{\circ}C$ and the generation time was 38min, which was extremely fast compared with other sulfur oxidizing bacteria. Optimum growth conditions in activated carbon as a carrier was pH5, $35^{\circ}C$ and those in bioceramics was pH 7∼8, $35^{\circ}C$. Cell growth immobilized in bioceramics was more stable in pH, temperature change than that immobilized in activated carbon and total number of cells in bioceramics were also higher. Based on these results, the bioceramics is thought to be better carrier in immobilization of Thiobacillus sp. IW.

• Solar Energy
• /
• v.15 no.1
• /
• pp.13-28
• /
• 1995

In this study, the history of Korean traditional Ondol was investigated and the latent heat materials and bioceramics were selected to develop the latent heat storage-bioceramics Ondol system based on the Korean traditional Ondol(sensible heat storage type), and the thermal characteristics of Ondol were analyzed experimentally The results could be summarized as follows; 1. Korean traditional Ondol has been originated in "Whaduk" which had been utilized continuously for about $2{\times}10^6$ years from the Old Stone Age to the Bronze Age, and Korean traditional Ondol using in these days has been utilized for about 976 years from the Koryu Dynasty to the Modern Ages. 2. $Na_2SO_4{\cdot}10H_2O(SSD)$ was selected as latent heat material for the latent heat storage Ondol. 3. Ondol unit was filled with the latent heat material of 0.63 kg and the dimension of Ondol unit was $400mm{\times}400mm{\times}27mm(width{\t\imes}depth{\times}height)$. 4. The comfortable surface temperature($23{\sim}29^{\circ}C$) of the latent heat storage Ondol was lasted 5 hours at the room temperature of $16{\sim}18^{\circ}C$, whereas that of sensible heat storage Ondol was lasted only 1.0 hours in the same conditions. 5. For the thermal effect of bioceramics, the Ondol air temperature i.n case of bioceramics treatment on the pannel was higher than that of without bioceramics treatment.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.89-97
• /
• 1996

Oriental melon and watermelon plants were cultivated in the soil treated with bioceramics in a greenhouse during summer season from June 1st to August 20th, 1995. Two application methods were employed, one was a mixed treatment of soil and bioceramics, and the other was a spray treatment of bioceramic solution on the stems and leaves. And two types of bioceramics were also stopped by five levels. In order to analyze the bioceramic effect on oriental melon and watermelon, the growth rate of stems, leaves and fruits were measured in the greenhouse. After harvest, the sweetness of fruits was measured and the freshness of fruits based on the storage period was tested by human taste and smell sense. The results are summarized as follows. 1. The growth rates of stems, leaves and fruits of oriental melon and watermelon were the largest in the bioceramic treatment of No. 3. 2. The density of oriental melon and watermelon was the largest in the bioceramic treatment of No. 3 and No. 2 respectively. 3. The Brix number of watermelon was 10.6 in non-bioceramic treatment and 11.5 in the bioceramic treatment of No. 2, and that of oriental melon was 8.6 in non-bioceramic treatment and 12.3 in the bioceramic treatment of No. 2. 4. The storage duration of watermelon treated with bioceramics was about 50 days in the condition of the ambient temperature of 25-3$0^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.43-43
• /
• 2006

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.56.2-56.2
• /
• 2012

Clinically-favored materials for bone regeneration are mainly based on bioceramics due to their chemical similarity to the mineral phase of bone. A successful scaffold in bone regeneration should have a 3D interconnected pore structure with the proper biodegradability, biocompatibility, bioactivity, and mechanical property. The pore architecture and mechanical properties mainly dependent on the fabrication process. Bioceramics scaffolds are fabricated by polymer sponge method, freeze drying, and melt molding process in general. However, these typical processes have some shortcomings in both the structure and interconnectivity of pores and in controlling the mechanical stability. To overcome this limitation, the rapid prototyping (RP) technique have newly proposed. Researchers have suggested RP system in fabricating bioceramics scaffolds for bone tissue regeneration using selective laser sintering, powder printing with an organic binder to form green bodies prior to sintering. Meanwhile, sintering process in high temperature leads to bad cost performance, unexpected crystallization, unstable mechanical property, and low bio-functional performance. The development of RP process without high thermal treatment is especially important to enhance biofunctional performance of scaffold. The purpose of this study is development of new process to fabricate ceramic scaffold at room temperature. The structural properties of the scaffolds were analyzed by XRD, FE-SEM and TEM studies. The biological performance of the scaffolds was also evaluated by monitoring the cellular activity.

• Journal of the Korean Ceramic Society
• /
• v.56 no.1
• /
• pp.37-48
• /
• 2019

The objective of this research is to analyze the fracture toughness of pure and silica co-doped yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) bioceramics containing 0.1 and 0.2 wt.% of alumina, and sintered at a temperature of $1500^{\circ}C$. Because of the relatively easy preparation of the test specimens and the high speed of testing, the Vickers indentation fracture (VIF) technique is more frequently used to evaluate the fracture toughness of biomaterials and hard biological tissues. The Young's modulus and hardness values were obtained by means of nanoindentation and indentation methods. The fracture toughness values of 3Y-TZP bioceramics were calculated and analyzed using 15 equations related to the VIF technique, and loadings of 49.03 and 196.13 N with a Vickers diamond. For validation, the results were compared with fracture toughness values obtained by the single-edge laser-notch beam (SELNB) method with an almost atomically sharp laser-machined initial notch.

• 대한치주과학회:학술대회논문집
• /
• 1998.11a
• /
• pp.7-8
• /
• 1998

• Proceedings of the Korean Ceranic Society Conference
• /
• 1986.12a
• /
• pp.17-22
• /
• 1986