• 펄프종이기술
• /
• 제38권2호
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• 대한환경공학회지
• /
• 제36권10호
• /
• pp.672-678
• /
• 2014

본 연구는 음식물 쓰레기 내 질소농도에 따른 발효과정에서 수소생성 특성과 미생물의 군집변화를 살펴보았다. 음식물 쓰레기 내 질소의 함량이 200 mg/L일 때 가장 높은 수소생산 효율을 보여주었으며, 이 때 수소생산율은 83.43 mL/g dry wt biomass/hr이였다. 질소의 함량이 600 mg/L 이상이 되면 수소생산이 저해되는 것으로 나타났으며 수소생산량과 B/A ratio (Butric acid/Acetic acid)의 비례적 상관관계는 관찰되지 않았다. 16S rDNA의 PCR-DGGE결과 대부분 군집은 Clostridium sp. 미생물로 규명되었으며 수소생성에 기여도가 큰 미생물은 Enterococcus faecium partial, Klebsiella pneumoniae strain ND6, Enterobacter sp. NCCP-231, 그리고 Clostridium algidicarnis strain E107 등으로 판명되었다.

• 농업과학연구
• /
• 제45권2호
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

• Ocean and Polar Research
• /
• 제38권3호
• /
• pp.225-234
• /
• 2016

This project sought to conduct an economic feasibility study regarding the commercial production of bio-hydrogen by the marine hyperthermophilic archaeon, Thermococcus onnurineus NA1 using carbon monoxide-containing industrial off-gas. We carried out the economic evaluation of the bio-hydrogen production process using the raw material of steel mill by-product gas. The process parameter was as follows: $H_2$ production rate was 5.6 L/L/h; the conversion of carbon monoxide was 60.7%. This project established an evaluation criterion for about 10,000 tonne/year. Inflation factors were considered as 3%. The operating costs were recalculated based on prices in 2014. The total investment required for development was covered 30% by capital and 70% by a loan. The operation cost for the 0.5-year test and integration, and the cost for the first three months in the 50% production period were considered as the working capital in the cost estimation. The costs required for the rental of office space, facilities, and other related costs from the construction through to full-scale production periods were considered as continuing expenses. Materials, energy, waste disposal and other charges were considered as the operating cost of the development system. Depreciation, tax, maintenance and repair, insurance, labor, interest rate charges, general and administrative costs, lubrication and miscellaneous expenses were also calculated. The hydrogen price was set at US$ 4.15/kg for the economic evaluation. As a result, the process was considered to be economical with the payback period of 6.3 years, NPV of 18 billion Won and IRR of 26.7%.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권1호
• /
• pp.66-70
• /
• 2017

Radioactive materials are used in medicine, non-destructive testing, and nuclear plants. Source localization is especially important during nuclear decommissioning and decontamination because the actual location of the radioactive source within nuclear waste is often unknown. The coded-aperture imaging technique started with space exploration and moved into X-ray and gamma ray imaging, which have imaging process characteristics similar to each other. In this study, we simulated $21{\times}21$ and $37{\times}37$ coded aperture collimators based on a modified uniformly redundant array (MURA) pattern to make a gamma imaging system that can localize a gamma-ray source. We designed a $21{\times}21$ coded aperture collimator that matches our gamma imaging detector and did feasibility experiments with the coded aperture imaging system. We evaluated the performance of each collimator, from 2 mm to 10 mm thicknesses (at 2 mm intervals) using root mean square error (RMSE) and sensitivity in a simulation. In experimental results, the full width half maximum (FWHM) of the point source was $5.09^{\circ}$ at the center and $4.82^{\circ}$ at the location of the source was $9^{\circ}$. We will continue to improve the decoding algorithm and optimize the collimator for high-energy gamma rays emitted from a nuclear power plant.

• Carbon letters
• /
• 제3권1호
• /
• pp.1-5
• /
• 2002

The regional bio-wastes available in abundance in India were converted into porous carbon by heat treatment at different temperatures from $650-950^{\circ}C$. The wood retain shapes after pyrolysis though shrinkage occured both in axial and radial directions. The shrinkage in radial direction was found to be more than in axial direction in all woods. The density of woods and chars from these at a given temperature has been found to follow linear relationship. Chars were steam activated at temperature $700-800^{\circ}C$ for different times between 45-240 min. Both the temperature and time of activation with steam has a profound effect on surface area. Chars from softwoods like bagasse and castor oil plant were activated at lower temperature, i.e. $700-750^{\circ}C$ whereas hard wood chars have to be activated at higher temperature around $800^{\circ}C$. The morphology of wood as well as of chars has been studied by SEM. The comparison of the two showed that the nature of porosity in chars depends on precursor morphology, nature and physical state of wood and presence of inorganic compounds in the wood. Hard wood results in cross inter connected pores while softwood leads to fibriller structure. The present studies show that activated carbon with reasonably good surface area (${\sim}1000m^2/gm$) can be prepared from soft wood bio-wastes like bagasse and castor oil plant, while surface area ${\sim}1370m^2/gm$ was achieved from hard wood bio waste of pine wood.

• Journal of Plant Biotechnology
• /
• 제35권1호
• /
• pp.31-39
• /
• 2008

We analyzed the current research trends of living modified organisms (LMO) by questionnaires in the interest of making biosaftey laws and policies in Korea. We executed a pre-survey at the Crop Functional Genomics 2004 conference and obtained LMO research information from 423 LMO research organizations, including 32 national research institutes, 314 universities, and 77 industries. We found that the total 59 kinds of hosts including 26 kinds of plants, 15 kinds of animals, and 18 kinds of microbes were used for LMO research and E. coli was the most common host. The risk of the most experimental hosts was below a biosafety level of 1 (73.8%) and 2 (25.9%). LMO development use purpose was implemented in various developmental uses: 51.3% in test and research use, 19% in health and medical use, and 12.9% in agriculture use. The experiment product, waste product, and products of host for LMO development were 327.2, 223.6, and 13.5 in number of plants; 280.6, 52.4, and 8.7 in number of animals; and $8.3\;{\times}\;10^{11}CFU$, $7.7\;{\times}\;10^{11}CFU$, and $6.5\;{\times}\;10^{11}CFU$ in microbes in 2004. The survey results about how to possess the LMO were very unreliable, because only 10.6% of the researchers returned the questionnaires. Consequently, we strongly suggest the scientific organizations as well as scientists should have more interests in biosafety of LMO research and an LMO biosafety management system should be developed for Korea's future biotechnology.

• 한국작물학회지
• /
• 제52권4호
• /
• pp.403-410
• /
• 2007

A field experiment was conducted to investigate effects of application time and rate of biofertilizer alone and in combination with chemical NPK fertilizer on growth, yield and quality of rice. The biofertilizer used composted food waste as substrate and added with effective microorganism. The treatments included recommended NPK fertilizer(RF, $11-5.5-4.8kg\;10a^{-1}$), half recommended NPK fertilizer(HRF, $5.5-2.8-2.4kg\;10a^{-1}$), half recommended NPK fertilizer plus $250kg\;10a^{-1}$ biofertilizer(HRF+Bio 250) and $500kg\;10a^{-1}$ biofertilizer(HRF+Bio 500). The biofertilizer treatments were applied at 0, 5 and 10 days before transplanting(DBT). Grain yield of HRF+Bio 250 at 5 DBT($648.4kg\;10a^{-1}$) was statistically similar to the highest obtained in the RF($654.1kg\;10a^{-1}$). Tiller numbers at HRF plus biofertilizer treatments were already high during the maximum tillering stage, and were similar with that of the RF and higher than that of the HRF during heading stage. Likewise, ripening ratio at HRF plus biofertilizer treatments was similar with that of the RF and higher than that of the HRF. Furthermore, all the biofertilizer treatments improved protein content but reduced the amylose content and palatability compared to treatments with chemical NPK fertilizer alone. Thus, HRF+Bio 250 at 5 DBT can be used to save 50% chemical NPK fertilizer and at the same time obtain an improved rice grain yield and quality.

• 인터넷정보학회논문지
• /
• 제15권5호
• /
• pp.1-7
• /
• 2014

무선센서 네트워크(WSNs)는 일반적으로 수많은 센서노드들이 배치되어 데이터를 전송하며, 불필요한 데이터 전송으로 인해 에너지 낭비를 초래한다. 기존의 연구들은 주로 에너지 소모문제를 해결하는데 집중되었다. 하지만 실시간으로 정보전송이 필요한 어플리케이션에 대해서는 지연 보장 역시 고려되어야 한다. 본 논문은 생체시스템을 모방하여 무선센서망에서 에너지의 소모와 연시간을 줄이기 위한 BISA(Bio-inspired Scheduling Algorithm)를 제안한다. BISA는 에너지 효율성이 높은 라우팅경로를 탐색하고 다중채널을 이용해 데이터 전송경로를 다중화함으로써 데이터 전송을 위한 에너지소모와 지연시간을 최소화한다. 실험결과를 통해 제안한 알고리즘의 기존방식 보다 적은 에너지를 사용하며 동시에 요구지연 시간을 보장함을 확인한다.

• 유기물자원화
• /
• 제11권1호
• /
• pp.129-129
• /
• 2003

본 연구는 음식물 퇴비의 합리적인 시용량을 검증하고, 3년 연용에 의한 토양 변화 및 고추 생육과 수량에 미치는 영향을 평가하고 돈분퇴비를 시용한 대조구와 생육 및 품질 면에서 비교 분석하여 적정한 퇴비 시용량을 설정하기 위하여 실시하였다. 처리구는 1, 2, 3차 연도 모두 동일한 방법으로 무처리구, 대조구(2ton/10a의 돈분퇴비), 음식물 퇴비 2t, 4t, 6t, 8ton/10a을 사용한 처리구 등 6개를 두었으며 3반복, 난괴법을 이용하였다. 음식물 퇴비와 돈분 퇴비의 이화학적 특성을 분석한 결과, 음식물 퇴비의 경우 1차 연도는 유기물과 NaCl 모두 부산물 비료의 공정규격에 적합하였으나, 2차 연도는 유기물이, 3차 연도는 NaCl이 공정규격에 적합하지 않았다. 그리고 돈분 퇴비의 경우 수분함량이 약간의 차이를 보였으나 공정규격을 벗어나지는 않았다. 토양은 음식물 퇴비 시용량이 증가할수록 대부분의 화학적 특성이 증가하였고, 연용에 의해서도 유기물, 치환성양이온, NaCl 등의 양이 증가함을 보여 염류집적이 일어나고 있음을 확인할 수 있었다. 또, 음식물 퇴비 시용량증가에 따라 비중은 낮아지고 공극률이 증가하여 물리성 개선에 도움을 주었으나, 1, 2, 3차 연도를 비교해 보았을 때 큰 차이는 없었다. 고추의 생육과 수량에 있어서도 음식물 퇴비 시용량이 증가할수록 초기 생육이 저조하였으며, 그로 인해 수량이 감소하였다. 또한 3년 연용으로 인한 음식물 퇴비의 축적으로 수량의 감소와 품질 저하를 초래하였다. 음식물 퇴비의 연용에서 2ton/10a 이상의 시용은 수량의 감소를 초래하였다. 이러한 결과로 볼 때 음식물 퇴비를 2ton/10a 이하로 사용하면 큰 무리는 없겠지만 장기 연용은 삼가는 것이 좋을 것이라 판단된다. 따라서 음식물 퇴비를 다른 일반 퇴비 제조의 중간 원료나, 또는 혼합 사용하는 시험을 계속 진행 중에 있다.