• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.499-508
• /
• 2008

This study was conducted to evaluate the effect of bio-starch from corn processing to replace dried whey in weaned pigs. A total of 120 crossbred [(Landrace×Yorkshire)×Duroc] pigs were weaned at 21 days of age weighing 6.01±0.34 kg in average. Five week feeding trial consisted of phase 1(0~2 wks) and phase 2(3~5 wks). Dietary treatments included 1) CON(basal diet), 2) BS5(whey 5%, partial substitution of bio-starch), 3) BS10(whey 10%, partial substitution of bio-starch) and 4) BS15(whey 15%, partial substitution of bio-starch). There were four dietary treatments with six replicate pens per treatment and five pigs per pen. During the overall period, there were no significant differences in the ADG(average daily gain) and gain/feed ratio among the treatments(P>0.05). However, the ADFI(average daily feed intake) was higher in BS5 and BS15 treatments than in CON treatment(P<0.05). At the 2nd week, dry matter and nitrogen digestibility were increased(quadratic effect, P=0.03 and P=0.01, respectively; cubic effect, P<0.001 and P=0.01, respectively) with the highest at 10% of bio-starch inclusion in the diets. At the last week of the experiment, dry matter, nitrogen and energy digestibility were increased(P<0.05) with the highest at 5% of bio-starch inclusion in the diets. At the 2nd week total protein concentration was increased(linear effect, P=0.04; cubic effect, P=0.01) with the highest at 10% of bio-starch inclusion in the diets. Also, BUN(blood urea nitrogen) was increased(linear effect, P=0.01) as the level of bio-starch inclusion increased in the diets. Fecal consistency score was inclined to lowers CON treatment than other treatments. In conclusion, the result of trial indicates that bio-starch can be included at the level of 5~10% of weaning pig diet replacing part of the dried-whey, and digestibilities were positively affected by bio-starch at growth stage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.32-38
• /
• 2012

This study was carried out to elucidate the potential in substitution of SB latex with eco-friendly starch based bio-binder as a coating binder. The part of SB latex in coating color of pre- and top layer was substituted with starch based bio-binder in order to evaluate the characteristics of coating color and coated paper, and printability. The viscosity and water retention of coating color were increased by substitution of SB latex with starch based bio-binder. Roughness of coated paper was increased by substitution with starch based bio-binder, although there was not significant changes in roughness when SB latex is used as a binder in pre-coating color. Brightness and whiteness of coated paper were not affected, but opacity and print mottle were improved by substitution with starch based bio-binder. The interesting result observed was that dry-pick did not affected significantly, and ink set-off was improved by starch based bio-binder. It is expected that starch based bio-binder can be commercialized if the systematic further research works are carried out.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.29-38
• /
• 2004

In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (T_g) and the melting temperature (T_m) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.943-947
• /
• 2007

The acid modification of waxy rice starch was conducted to improve the yugwa production process. The intrinsic viscosity, paste viscosity, and differential scanning calorimetry characteristics of acid modified starch were measured, and bandaegi and yugwa prepared from acid modified starch were evaluated. The intrinsic viscosities of acid thinned starches were 1.48, 1.27, 1.15, and 0.91 mL/g after reaction times of 1, 2, 3, and 4 hr, respectively. The gelatinization enthalpy was reduced from 16.3 J/g in native starch to 15.8, 15.3, 14.7, and 14.5 J/g in acid thinned starches as the time of acid thinning increased. The peak viscosity and final viscosity decreased with increasing the time of acid thinning, but the pasting temperature was slightly increased in acid thinned starches. The hardness of bandaegi from acid thinned starches under high pressure greatly decreased relative to the control, typical yugwa. Yugwa from acid thinned starch under high pressure maintained a homogeneous structure containing tiny and uniform cells similar to that of native waxy rice starch used for typical yugwa. Acid thinning under high pressure appears to be a good alternative to the existing steeping process for better yugwa quality.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1301-1313
• /
• 2021

This study investigated the effects of applying cellulase and starch on the fermentation characteristics and microbial communities of Napier grass silage after ensiling for 30 d. Three groups were studied: No additives (control); added cellulase (Group 1); and added cellulase and starch (Group 2). The results showed that the addition of cellulase and starch decreased the crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and pH significantly (p < 0.05) and increased water-soluble carbohydrate (WSC) content (p < 0.05). The addition of additives in two treated groups exerted a positive effect on the lactic acid (LA) content, lactic acid bacteria (LAB) population, and lactic acid / acetic acid (LA/AA) ratio, even the changes were not significant (p > 0.05). Calculation of Flieg's scores indicated that cellulase application increased silage quality to some extent, while the application of cellulase and starch together significantly improved fermentation (p < 0.05). Compared with the control, both additive groups showed increased microbial diversity after ensiling with an abundance of favorable bacteria including Firmicutes and Weissella, and the bacteria including Proteobacteria, Bacteroidetes, Acinetobacter increased as well. For alpha diversity analysis, the combined application of cellulase and starch in Group 2 gave significant increases in all indices (p < 0.05). The study demonstrated that the application of cellulase and starch can increase the quality of Napier grass preserved as silage.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.625-631
• /
• 2015

In this study, low cost bio-flocculants, chitosan, cationic starch and Mg-sericite, were used as a flocculant to harvest freshwater microalgae, Chlorella vulgaris. Chitosan, cationic starch and Mg-sericite separated successfully >98% of C. vulgaris at following optimal parameters: 90 mg/L chitosan at pH 6-7, 70 mg/L cationic starch at pH 9-10 and 50 mg/L Mg-sericite at pH 4-5. A relatively high correlation coefficient (R²) of 0.9993 for chitosan, 0.9971 for catonic starch and 0.9924 for Mg-sericite was obtained. The investigated flocculants amount increased linearly with increasing the microalgae amount. The biopolymer, Mg-sericite, was more effective than that of other investigated flocculants. These results indicated that a bio-flocculants, chitosan, cationic starch and Mg-sericite, could prove to be an effective flocculant for economical production of microalgae biomass. In addition, Mg-sericite was more effective comparing to the other investigated flocculants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1889-1899
• /
• 2010

This study examines the preparation and characterization of Kenaf/Starch bio-composites used as filler and a matrix. Kenaf was cultivated in Chung-ju in Korea, and the Kenaf/Starch bio-composites were prepared under various conditions of kenaf fiber length (1-5 centimeters); the content of Kenaf fiber was 10%, 20%, 30%, and 40%, and the number of composite layers (one-four). Depending on the formation conditions of Kenaf/Starch composites, the physical properties such as tensile strength, elongation, and the young modulus of the Kenaf/Starch composites were measured. In addition, we measured the SEM cross-section images in order to investigate the interfacial adhesion properties of fractured surfaces. As a result, the tensile strength and elongation of the Kenaf/Starch composites were highest in the molding conditions of a hot press at $120^{\circ}C$, 3000PSI of pressure, and for 30 minute periods. The result of measuring the physical properties of the composites manufactured by varying the content of Kenaf fiber when the content of Kenaf fiber was 30% as well the physical properties of the Kenaf/Starch composite was found desirable. It was found that the physical properties improved with more overlapped layers in the composites manufactured by varying the number of overlapped layers. Through the measuring of the SEM cross-section images, we found that the interfacial adhesion state between the filler and matrix of Kenaf/Starch composite greatly affects the physical properties.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1287-1294
• /
• 2013

In this study, thermoplastic starch (TPS), cross-linked starch (CS), and cross-linked starch modified with glycerol (CTPS) were prepared, and the mechanical properties of the compatibilized low-density polyethylene (LDPE) blends (LDPE/TPS, LDPE/CS, and LDPE/CTPS) were investigated and compared with those of uncompatibilized LDPE/TPS, LDPE/CS, and LDPE/CTPS blends. Maleic-anhydride-grafted polyethylene was used as the compatibilizer. The enhanced tensile strength and elongation at break for the compatibilized LDPE/modified starch blends are a result of the improved compatibility between LDPE and the modified starch, which was confirmed by torque measurements and scanning electron microscopy.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.63-70
• /
• 2014

Part of SB latex in pre-coating color was substituted with newly developed starch-based bio-binder in order to investigate the effect of starch-based bio-binder in pre-coating color on the properties of coating color and coated paper. Smoothness and gloss of coated paper were decreased with the increase of bio-binder substitution ratio. Brightness and whiteness did not show the significant changes, but stiffness was improved with bio-binder. Ink set-off, dry-pick and wet pick were decreased with the increase of bio-binder substitution ratio. In general, when all SB latex is substituted with bio-binder, ink set-off, dry- and wet-pick were deteriorated. However, it was found that if the bio-binder substitution ratio is controlled below 50%, similar qualities with coated paper manufactured by the use of SB latex binder can be obtained.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.649-654
• /
• 1993

We investigated the texture of the sweet potato starch gels treated with maltogenic amylase. Effects of branched gluco-oligosaccharides and acorn starch on the texture of the sweet potato starch gel were also investigated. Hardness and cohesiveness of gels were measured by using Instron and sensory evaluation on the gel properties was performed. From the results of the instrumental analysis, it was found that the overall textural properties as Mook could be improved by adding branched glucooligosaccharides, maltogenic amylase or acorn starch to the sweet potato starch gel. As a result, there was a decrease in the cohesiveness of gels while the hardness of gels increased. The sensory evaluation study indicated that the sweet potato starch gels treated with 0.02% maltogenic amylase, or added with 12.5% branched gluco-oligosaccharides, or mixed with 50% acorn starch had preferable quality as Mook.