• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.303-308
• /
• 2013

A remote controlled sprayer has designed, manufactured and experimented to spray well on pear trees with pesticides. This study was executed to automate pest management of pear trees. Types of spray nozzle, which was used on the system, were analyzed experimentally to find an optimal spray equipment configuration with several nozzles. Attributions of ultrasonic sensors were analyzed to adjust spraying distance of an unmanned sprayer system. This paper investigated shapes of pear trees and cultivating environment of pear orchard. In order to select optimal spray environment, liquid distribution was measured while angle of nozzle was changed. Additionally, liquid distribution by distance and sprayed liquid capacity by side distance were measured. According to information of shapes of pear trees and cultivating environment of pear orchard, sprayer frames of an unmanned sprayer system were manufactured and sprayer frames were suitable for interval of pear trees. The sprayer system could adjust width of sprayer frames to 2.5 m and height of sprayer frames to 1.7 m. Optimal angle of nozzle, and optimal distance between objects and nozzle were $15^{\circ}$ and 0.8 m. When side distance was placed from 1.2 m to 1.8 m, sprayed capacity reached to the highest amount.

• Translational and Clinical Pharmacology
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2017

Glimepiride, a third generation sulfonylurea, is an antihyperglycemic agent widely used to treat type 2 diabetes mellitus. In this study, an untargeted urinary metabolomic analysis was performed to identify endogenous metabolites affected by glimepiride administration. Urine samples of twelve healthy male volunteers were collected before and after administration of 2 mg glimepiride. These samples were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), and then subjected to multivariate data analysis including principal component analysis and orthogonal partial least squares discriminant analysis. Through this metabolomic profiling, we identified several endogenous metabolites such as adenosine 3', 5'-cyclic monophosphate (cAMP), quercetin, tyramine, and urocanic acid, which exhibit significant metabolomic changes between pre- and posturine samples. Among these, cAMP, which is known to be related to insulin secretion, was the most significantly altered metabolite following glimepiride administration. In addition, the pathway analysis showed that purine, tyrosine, and histidine metabolism was affected by pharmacological responses to glimepiride. Together, the results suggest that the pharmacometabolomic approach, based on LC-MS/MS, is useful in understanding the alterations in biochemical pathways associated with glimepiride action.

• Journal of ILASS-Korea
• /
• v.16 no.3
• /
• pp.152-158
• /
• 2011

Fast pyrolysis of biomass is one of the most promising technologies for converting biomass to liquid fuels. The pyrolysis oil, also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is the use of BCO/diesel emulsions. In this study, a diesel engine operated with diesel, bio diesel (BD), and BCO/diesel emulsion was experimentally investigated. Performance and emission characteristics of a diesel engine fuelled by BCO/diesel emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion especially in the injection system.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.398-402
• /
• 2005

The enzyme Xeronine was investigated as a microbial activating substance in biological wastewater treatment processes. Xeronine as bio-stimulant was injected in the anaerobic sludge and the activated sludge treating wastewater in order to examine the effect of hidden benefits. Bio-stimulant did not show significant improvement of anaerobic treatablity. In the aerobic system, higher bio-stimulant dose condition resulted in slightly more removal of nitrogen and phosphorus. Floc aggregation and zone settling velocity as solid-liquid separation factors in activated sludge systems was enhanced by bio-stimulant. Effects of bio-stimulants injection on improvement of water quality and microbial activity did not clear in terms of normal operation conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.545-554
• /
• 2017

This study is concerned with the stability of liquid crystal forming emulsifier with localized depend on change of pH using liquid crystal forming agent of advanced company. The liquid crystal emulsifying agent was localized using Sugar Crystal-LC (bio-tech Co., Ltd., Korea), and comparative samples were measured by using Nikkomulese-LC (Nikko Camicarls, Japan) and Alacel-LC (Croda Camicarls, UK). Liquid crystal formation was confirmed microscopically to show the formation of liquid crystal structure at acidic (pH=4.2), neutral (pH=7.0) and alkaline (pH=11.7). The particles of the liquid crystal were observed with a polarizing microscope according to the stirring speed. The stirring time was all the same for 3 minutes with a homo-mixer, and the stirring speed was increased to 2500 rpm, 3500 rpm and 4500 rpm to observe the liquid crystal state. As a result, it was found that the Korean surfactant was more stable and clear liquid crystal structure was formed than the two foreign acids. In the case of the UK in acid zone, the emulsion particle size was uniform and unstable. In the case of Japanese surfactant, it has similar structure and performance to those of localized Korean. It was found that Korean surfactant had superior emulsifying performance in acid zone compared with foreign products. It is possible to develop various formulations such as liquid crystal cream, lotion, eye cream, etc. using Sugar Crystal-LC emulsifier as an application cosmetic field, and it is expected that it can be widely applied as emulsifying technology for skin care external application in the pharmaceutical industry and the pharmaceutical industry as well as the cosmetics industry.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.454-461
• /
• 2009

The purpose of this study is to analyze the RFID recognition performance by level of water. A 13.56 MHz RFID management system for packaged liquid food logistics is consisted of antenna, reader, passive type tags, and embedded controller. The tests were conducted at different level of water, distances between tag and antenna, and position of attached tags. To analyze the RFID recognition performance, maximum recognition distances for a container and recognition rates for a logistics made of 27 containers were measured and analyzed. The maximum recognition distance for a container was different depending on position of attached tags, and attached tag at upside position showed a good performance. But, the recognition rate of 27 containers showed a good ability for attached tags at front side position, 30~35 cm distance to antenna, and water level 1. Therefore, to manage packaged liquid food logistics using RFID system, position of attached tag, distances between tag and antenna, and level of water should be considered.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1557-1565
• /
• 2016

Itaconic acid (IA) is a dicarboxylic acid included in the US Department of Energy's (DOE) 2004 list of the most promising chemical platforms derived from sugars. IA is produced industrially using liquid-state fermentation (LSF) by Aspergillus terreus with glucose as the carbon source. To utilize IA production in renewable resource-based biorefinery, the present study investigated the use of lignocellulosic biomass as a carbon source for LSF. We also investigated the production of fumaric acid (FA), which is also on the DOE's list. FA is a primary metabolite, whereas IA is a secondary metabolite and requires the enzyme cis-aconitate decarboxylase for its production. Two lignocellulosic biomasses (wheat bran and corn cobs) were tested for fungal fermentation. Liquid hydrolysates obtained after acid or enzymatic treatment were used in LSF. We show that each treatment resulted in different concentrations of sugars, metals, or inhibitors. Furthermore, different acid yields (IA and FA) were obtained depending on which of the four Aspergillus strains tested were employed. The maximum FA yield was obtained when A. terreus was used for LSF of corn cob hydrolysate (1.9% total glucose); whereas an IA yield of 0.14% was obtained by LSF of corn cob hydrolysates by A. oryzae.

• Mass Spectrometry Letters
• /
• v.8 no.4
• /
• pp.109-113
• /
• 2017

Single analytical procedure including extraction, liquid chromatography, and mass spectrometric analysis was evaluated for the simultaneous measurement of lysophospholipids (LPLs). LPLs, particularly, lysophosphatidic acids (LPA) and sphingosine 1-phosphate (S1P) are lipid messengers ubiquitously found in various biological matrix. The molecular species mediate important physiological roles in association with many diseases (e.g. cancer, inflammation, and neurodegenerative disease), which emphasize the significance of the simple and reliable analytical method for biomarker discovery and molecular mechanistic understanding. Thus, we developed analytical method mainly focusing on, but not limited by those lipid species S1P and LPA using reverse phase liquid chromatography-tandem mass spectrometry (RPLC-ESI-MS-MS). Extraction method was modified based on Folch method with optimally minimal level of ionization additive (ammonium formate 10 mM and formic acid). Reverse-phase liquid-chromatography was applied for chromatographical separation in combination with negative ionization mode electrospray-coupled Orbitrap mass spectrometry. The method validation was performed on human blood plasma in a non-targeted lipid profiling manner with full-scan MS mode and data-dependent MS/MS. The proposed method presented good inter-assay precision for primary targets, S1P and LPA. Subsequent analysis of other types of LPLs identified a broad range of lysophosphatidylcholines (LPCs) and lysophosphatidyl-ethanolamines (LPEs).

• Applied Biological Chemistry
• /
• v.36 no.4
• /
• pp.310-314
• /
• 1993

High performance liquid chromatographic method using a TSK-gel amide 80 column and isocratic elution with acetonitrile-water (63 :35 ;v/v) mixture was used for the separation and the quantitation of fructo (GF2-GF7)- and inulo-oligosaccharides (F2-F4). Retention time of each standard carbohydrate was highly reproducible. Standardization curves obtained by plotting the peak areas against the amounts of each carbohydrate showed very high coefficient of determination$({\ge}0.9884)$ and similar slopes, and a wide range of y-intercepts. Our results suggest the use of each Pure oligosaccharide for its own standardization curve instead of using a certain carbohydrate as an internal standard.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.246-253
• /
• 2007

This study was performed to enhance the cleanup efficiency of methoxyfenozide and bentazone by pH adjustment in the course of liquid-liquid partition and to develop an optimum analytical conditions using HPLC coupled with DAD for two matrices, brown rice and rice straw. Preparation procedure of brown rice sample was "extraction${\rightarrow}$coagulation${\rightarrow}$liquid-liquid partition$\rightarrow$-florisil C.C", and this procedure was samely applied to two compounds. In rice straw, preparation procedure of methoxyfenozide sample was "extraction$\rightarrow$-alkalization$\rightarrow$liquid-liquid extraction$\rightarrow$coagulation$\rightarrow$florisil C.C", and in the case of bentazone, "extraction$\rightarrow$alkalization$\rightarrow$liquid-liquid partition$\rightarrow$acidification$\rightarrow$liquid-liquid extraction$\rightarrow$florisil C.C". All these purified samples were redissolved in the mobile phases, acetonitile : 20 mM sodium acetate (75:25, v/v) for methoxyfenozide and acetonitrile : 75 mM sodium acetate, pH 6.0 (40:60, v/v) for bentazone. Recoveries of methoxyfenozide analysis in brown rice and rice straw were 83.5-97.4 and 86.4-97.3%, and detection limits were 0.02 and 0.04 mg/kg, respectively. Recoveries of bentazone in brown rice and rice straw were 86.8-101.9 and 88.3-94.5% and detection limits were 0.005 and 0.01 mg/kg, respectively. This methods seem to be usefully applied to the residue analysis of two compounds in the view of producing stable analytical condition and fair reproducibility.