• Journal of Bio-Environment Control
• /
• 제6권3호
• /
• pp.176-182
• /
• 1997

A simulation model for the analysis of the transmissivity of direct and diffuse solar radiation In glasshouse was developed. This model would be applicable to investigate the influences of time of year, orientation and slope of glasshouse, dimensions of the frames used, and latitude of the site on the transmissivity of direct and diffuse solar radiation in single-span or multispan glasshouse. The transmissivity of diffuse solar radiation was 60.4％ for the single-span glass-house. It was independent of both orientation and time of year, During the winter season, the transmissivity of direct solar radiation was 67~69％ for the E-W orientation single-span glasshouse, which was 14~16％ higher than that for the S-N orientation. Oppositely the transmissivity of direct solar radiation for the S-N orientation was higher than that for the E-W orientation. during the autumn season. There was no influence of the latitude In the country on the transmissivity of direct solar radiation.

• Korean Journal of Environmental Agriculture
• /
• 제35권2호
• /
• pp.97-103
• /
• 2016

BACKGROUND: Clay mineral is well known to improve physico-chemical of soil. The objective of this study was to investigate the growth characteristics and inorganic nutrient contents of crops with application levels of phyllite.METHODS AND RESULTS: Both young radish and lettuce were selected as target crops for this study. The experiment was conducted in a wagner pot(1/5000a) in glass house at Sunchon National University. Treatment conditions were divided P0NPK(No phyllite + NPK), P5NPK(phyllite 5 Mg/ha + NPK), P10NPK(phyllite 10 Mg/ha + NPK) and P15NPK(phyllite 15 Mg/ha + NPK) by crops, respectively. Bulk density and porosity of soil in control without treatment conditions were ranged from 1.02 ∼1.04 g/cm³ and 56.5∼57.0%, respectively, and those for treatments with phyllite were in the ranged from 0.94∼1.00 g/cm³ and 58.4∼63.5%, respectively. Dry weights of young radish and lettuce were higher in P15NPK treatment than those in other treatments. The amounts of T-N, T-P and K uptake in young radish with phyllite application treatments were increased 36∼115, 18∼67 and 20∼76% than without phyllite application treatment, respectively. In lettuce treatments, amounts of T-N, T-P and K uptake were intended to all tested treatments similar with result of young radish treatment.CONCLUSION: Therefore, these results confirm that phyllite application to the soil improves physico-chemical of soil in addition to improving growth of young radish and lettuce.

• Journal of Bio-Environment Control
• /
• 제13권2호
• /
• pp.81-89
• /
• 2004

This study was conducted in a commercial plug glasshouse in Sacheon to examine the possibility of producing tomato plug seedlings using various growing media containing cellular glass foam (CGF)and carbonized chestnut woodchips (CCW) as medium components. Plug seedlings of 'Seogun' tomato were grown in media containing 50% CCW＋50% peatmoss, 33% CGF＋67% peatmoss, and 50% peatmoss＋50% granular rockwool. A commercial plug medium (Tosilee) was used as the control. All seeds were sown in 200 cell plug trays on November 28, 2001. Seedling growth was measured at 31 days after sowing. Each treatment showed a similar growth result as compared to the control. Plant height, root grade, fresh weight, and air space and bulk density of the medium were significantly greater in the 33% CGF＋67% peatmoss treatment than those in the other media. However, growth was slightly suppressed in the 50% CCW＋50% peatmoss. pH and EC of the media were the highest in the control treatment, although no toxicity symptoms had been observed. The results suggest that perlite can be replaced with a new material such as CGF in the commercial scale production of plug seedlings of 'Seogun' tomato.

• Journal of Bio-Environment Control
• /
• 제6권4호
• /
• pp.242-249
• /
• 1997

Environmental control operations have been considerably contributed to the reduction of labor cost in both plastic film and glass greenhouses since government supported projects were begun. However, some problems are still remaining on the optimal environmental control and excessive operation due to an inflexible software regulating ventilation gear - reducers. The unadjustable software caused the damage of ventilation system, resulting in heat stresses of crops. This study was performed to develop a ventilation software controlling the vent opening level, opening sequence, based on the wind direction, and control interval according to the difference between ambient and set- up temperatures. The software included a beeper system alarming urgent cases, while a manager was remote from the greenhouse. A compatible hardware with the software was also developed by using a low-cost diffused DSP controller.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제47권5호
• /
• pp.588-596
• /
• 2014

To examine the influences of water temperature and stocking density on feeding, growth and blind-side hypermelanosis of the starry flounder Platichthys stellatus, we performed an experiment with fry at two densities: 2 and 8 fish/L. The fry had a total length of $3.2{\pm}0.1cm$, body weight $0.6{\pm}0.1g$, and pigmented patches (pigmented ratio $2.6{\pm}0.4%$) on the blind side. Duplicate experiments were conducted in 93.7 L glass tanks for 120 days, from July to November. We determined daily food intake (DFI), food efficiency (FE), growth, survival rate, ratio of hypermelanic fish, and pigmented area rate on the blind side at 60-day intervals. The DFI was less than 50 mg/fish/day, and growth was delayed from July to September (water temperature [WT]> $20^{\circ}C$). After October, when WT < $20^{\circ}C$, the DFI increased significantly and the growth was accelerated, suggesting that the rearing temperature of starry flounder in artificial facilities should be < $20^{\circ}C$. While the FE, and survival did no differ between the two density groups, DFI and growth were significantly higher at 2 fish/L than at 8 fish/L. There was no difference in the pigmented area ratio between the two density groups. Although the hypermelanosis was not correlated with body size, the malpigmentation increased with growth. These results suggest that a high stocking density is not the main cause of blind-side hypermelanosis, although it can accelerate hypermelanosis in the starry flounder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권9호
• /
• pp.6403-6410
• /
• 2015

Medical polymer PLGA is biocompatible, biodegradation, mechanical characteristic and biostability, and the degradation time can be adjust by controlling the number of monomer. In this paper, PLGA membranes have different composition ratio by L/D type was prepared by phase transition method. And the PLGA membrane in phosphate buffered saline(PBS) at the different test temperatures for different periods of time to examined for change in mass and measured the pH of degradation media. Measurement of Tg and surface structure was performed using a DSC and Stereoscopic microscope. As the molecular weighter increase, hydrolysis rate was decrease in geometrical progression. According to the composition ratio by L/D type, degradation rate and the change of pH are large.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권5호
• /
• pp.3351-3356
• /
• 2014

Recently, Importance of studying based on biomass materials have increased due to the concern about plastic waste problems. Cellulose acetate butyrate (CAB) is a potential alternative to petroleum-based plastics because of its biodegradable property. Poly(ethylene-co-isosorbide terephthalate) (PEIT) is bio-based plastic, produced by isosorbide monomer. In this study, CAB/PEIT blends were prepared by solution blending to improve thermal stability of CAB. CAB and PEIT were dissolved in chloroform, and then precipitated in ethanol. To evaluate the compatibility of CAB/PEIT blends, the morphology and glass transition behaviors were analyzed by FE-SEM and DMA, respectively. TGA results revealed the improved thermal stabilities of the PEIT-rich and 50:50 compositions. No new or changed crystal structures were observed in the XRD result. Finally, CAB/PEIT solution blends showed good compatibility in overall compositions.

• Korean Journal of Environmental Agriculture
• /
• 제35권4호
• /
• pp.286-293
• /
• 2016

BACKGROUND: 18% of difenoconazole+iminoctadin triacetate microemulsion (3%+15%) formulation were mixed and sprayed as closely as possible to normal practice on the ten of farms located in the Youngju of South Korea. Patches, cotton gloves, socks, masks and XAD-2 resin were used to measure the potential exposure for applicators wearing standardized whole-body outer and inner dosimeter (WBD). This study has been carried out to determine the dermal and inhalation exposure to difenoconazole during preparation of spray suspension and application with a power sprayer on a grape orchard. METHODS AND RESULTS: A personal air monitor equipped with an air pump IOM sampler and cassette and glass fiber filter were used for inhalation exposure. The field studies were carried out in a grape orchard. The temperature and relative humidity were monitored with a thermometer and a hygrometer. Wind speed was measured using a pocket weather meter. All mean field fortification recoveries were between 97.3% and 119.6% in the level of 100 LOQ (limit of quantification) while the LOQ for difenoconazole was $0.025{\mu}g/mL$ using HPLC-UVD. The arms exposure to difenoconazole for the mixer/loader (0.0794 mg) was higher than other body parts (head, hands, upper body, legs). The exposure to difenoconazole in the legs for applicator (3.78 mg) was highest in the parts of body. The dermal exposure for mixer/loader and applicator were 0.02 and 2.28 mg on a grape orchard, respectively. The inhalation exposure during application was estimated as 0.02 mg. The ratio of inhalation exposure to dermal exposure was equivalent to 0.9% of the dermal exposure. CONCLUSION: The inhalation exposure for applicator indicated $18.8{\times}10^{-3}mg$, which was level of 0.9% of the dermal exposure (2.28 mg). Operator exposure (0.004 mg/kg bw/day) to difenoconazole during treatment for grape is calculated as 2.5% of the established AOEL (0.16 mg/kg bw/day).

• Journal of the Korean Applied Science and Technology
• /
• 제34권3호
• /
• pp.525-535
• /
• 2017

In order to produce hydrophilic coating solution, which has superior antifogging and antifouling effect on the glass surface of solar cell module as well as improving photovoltaic efficiency, nanosilica was dispersed in an aqueous solution of Tween 20 and fluorosurfactant composed of decafluorobutane and polyethylene glycol. The antifogging effect at high temperature was excellent for all the coating solutions containing nanosilica, but the antifouling effect was observed when the content of nanosilica was over 6 wt%. As the content of fluorosurfactant increased, the initial water contact angle slightly increased and the antifogging effect remained well until 500 wiping with wet $Wipeol^{(R)}$. The antifouling effect was also excellent regardless of the content of fluorosurfactant, thus 0.1 wt% of the fluorosurfactant was enough for a coating solution production. From the AFM results, when 0.1 wt% to 0.3 wt% of the fluoro surfactant was added, the fractal structure of the coated glass surface was clearly existed and contributed to the better antifouling effect. The transmittance of coated glass surface was highest in TL-1 coating solution containing 0.1 wt% of fluorosurfactant, and the addition of fluorosurfactant in a larger amount than 0.1 wt% did not improve the transmittance. This result is in good agreement with the previous AFM result which shows a high surface roughness as well as a fractal structure formation for the TL-1 coating solution.

• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.102-105
• /
• 2008

The freezing patterns of commercial frozen foods were characterized by using proton nuclear magnetic resonance ($^1H$ NMR) relaxometry and differential scanning calorimetry (DSC). The liquid-like components like unfrozen water were investigated as a function of temperature (10 to $-40^{\circ}C$) and then compared with the unfrozen water content measured by DSC. The formation of ice crystals and the reduction of water in the foods during freezing were readily observed as a loss of the NMR signal intensity. The proton NMR relaxation measurement showed that the decreasing pattern of the liquid-like components varied depending on the samples even though they exhibited the same onset temperature of ice formation at around $0^{\circ}C$. When compared with the unfrozen water content obtained by the DSC, the NMR and DSC results could be closely correlated at the temperature above $-20^{\circ}C$. However, the distinct divergence in the values between 2 methods was observed with further decreasing temperatures probably due to the solid glass formation which was not detected by DSC.