• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.42-48
• /
• 1999

This study was executed to see the effects of Ca : K ratios in me.L$^{-1}$ -0:9, 1.5:7.5, 3:6, 4.5:4.5, 6:3 - in the nutrient solution on the photosynthesis, transpiration, growth and incidence of tipburn in butterhead ‘Omega’and Leaf ‘Grand Rapids’lettuce (Lactuca sativa. L) grown in nutrient film technique(NFT). The photosynthesis of both lettuces showed high in the Ca : K ratios of 3:6 and 4.5:4.5 regardless of species. But stomatal resistance of Grand Rapids was higher than that of Omega. The highest transpiration rate of them was shown in the Ca : K ratio of 3:6. The transpiration rate of developing leaves was lower than that of expanded leaves. It was seemed to have relation with incidence of tipbum in the developing leaves. The nutrient solution treatment without Ca developed less growth than that of other treatments, especially growth and development of apical part were inhibited, so that in the both of them incidence of tipburn appeared 100 percent. The incidence of tipburn in Omega appeared 25 percent in the Ca/K ratio of 1.5:7.5, but Grand Rapids did not show it according to the Ca/K ratio in nutrient solution. The highest growth in two species was also shown in the Ca/K ratio of 3:6 except nutrient solution without Ca. This study suggested that the unbalanced ratio of Ca/K affected Ca transport in two species because of the increase of stomatal resistance and diffusive resistance and the decrease of photosynthesis and transpiration.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.72-77
• /
• 2011

The objective of the present study is to provide the basic data necessary for estimating the overall heat transfer coefficient of commercial plastic greenhouse. The heat flow through covering of greenhouses was measured and the variation of overall heat transfer coefficient was analyzed. Because the inside-outside temperature difference of greenhouse to indicate the stabilized overall heat transfer coefficient was different depending on the number of covering layers, the actual overall heat transfer coefficient should be decided in range of inside-outside temperature difference to make the coefficient constant for each covering method. The variation trend of the overall heat transfer coefficient according to the inside-outside temperature difference corresponded with the existing research results, but the specific values of temperature difference to present the stabilized overall heat transfer coefficient were different each other. The increase rates of overall heat transfer coefficient with wind speed were quite dissimilar among several research results and the quantity of heat loss through covering according to the wind speed in the double layers covered or curtained greenhouse was less than that in the single layer covered greenhouse. Because there was large variations among the values of overall heat transfer coefficient for the polyethylene film greenhouses, it was required to establish the standardized environmental condition for experiment measuring heat flow through covering in commercial greenhouse.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.91-115
• /
• 1996

In the recent years, protected horticultural facilities have been modernized and glasshouses are also propagating in Korea, even most vegetables production are conducted in the traditional plastic houses covered with, for example, PVC film for just temperature keeping. It would limit the productivity and competitivity of the vegetable production industry without automatization and high quality year round production. A plant factory, aimed to produce vegetables in the limited areas, was initiated in Christensen farm, Denmark in 1957, and widely propagated in some developed countries. As it has the automatized system which enables to keep optimized environment conditions, it will be the best facility for high quality products as well as year round planned production. However, we have not even started the plant factory production. Since the plant factory is requiring lots of resources, besides plant cultivation technologies, such as environment control, automatic engineering and robotics, our approach to the development of plant factories should be minded on Practical Plant Factories considering our current farming practices and least capital needs rather than blindly employing the advanced technologies from developed countries. Thus, Korean plant factory development can be initiated with year round leaf vegetables production in NFT or DFT cultivation system instead of the moval bed system, in which aerial environment factors such as light, temperature, humidity and CO$_2$ concentration and root environment ones such as solution concentration, temperature, pH and water soluble oxygen shall be automatically controlled. And the seeding, seedling and transplanting operations shall be accomplished in the house entrance, and the harvesting and grading opreations shall be conducted in the house exit. For practical plant factories, environment control technologies including artificial light source, illumination and air conditioning, automatic management for nutrient solution and automatic production line of moval bed system, transplanting and harvest should be developed along with researches on the cost reduction of factory building construction.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.299-309
• /
• 1997

This experiment was conducted to determine the mineral absorption character and develop the optimum composition of nutrient solution for dill(Anethum graveolens L.) in hydroponics. Dill(Anethum graveolens L.) plants were grown in nutrient film technique(NFT) supplied with 1/4, 1/2, and 1 strength of the nutrient solution developed by National Research Station in Japan(HRS). Plants grown in 1/2 strength showed the best growth in plant height, fresh weight, and dry weight compared with those grown in 1/4 or 1 strength. In 1/2 strength solution, pH and EC changed little and proper nutrient contents were observed in the leaves as compared to plant nutrient diagnosis standard. Based on these results, optimum macronutrients were composed by nutrient- water absorption rate(n/w) with 1/2 strength: NO$_2$―N 8.85, NH$_4$―N 0.55, P 2.1, K 6.2, Ca 2.8, and Mg 1.7 me L$^{-1}$ To examine the suitability of the nutrient solution developed(SCU) , dill plants were grown in NFT supplied with two different kinds of solution and concentration. 1/2, 1, 3/2 and 25 of SCU and 1/2S of HRS. Changes of pH and EC were not distinct in 1S, but a significant change of pH was shown in low concentrations-HRS 1/2S and SCU 1/2S. Shoot fresh and dry weight were much higher in the plants grown in SCU IS as compared with HRS 1/2S. There were no significant differences in growth of plants grown in SCU IS, 3/2S, and 25. In addition, nutrient contents in the leaves grown by SCU 1S were in proper levels as compared with plant nutrient diagnosis standard. SCU 1S developed in this experiment was found to be optimum for dill in hydroponics.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.387-413
• /
• 1998

Image resampling is of particular interest in digital radiology. When resampling an image to a new set of coordinate, there appears blocking artifacts and image changes. To enhance image quality, interpolation algorithms have been used. Resampling is used to increase the number of points in an image to improve its appearance for display. The process of interpolation is fitting a continuous function to the discrete points in the digital image. The purpose of this study was to determine the effects of the seven interpolation functions when image resampling in digital periapical images. The images were obtained by Digora, CDR and scanning of Ektaspeed plus periapical radiograms on the dry skull and human subject. The subjects were exposed to intraoral X-ray machine at 60kVp and 70 kVp with exposure time varying between 0.01 and 0.50 second. To determine which interpolation method would provide the better image, seven functions were compared; (1) nearest neighbor (2) linear (3) non-linear (4) facet model (5) cubic convolution (6) cubic spline (7) gray segment expansion. And resampled images were compared in terms of SNR(Signal to Noise Ratio) and MTF(Modulation Transfer Function) coefficient value. The obtained results were as follows ; 1. The highest SNR value(75.96dB) was obtained with cubic convolution method and the lowest SNR value(72.44dB) was obtained with facet model method among seven interpolation methods. 2. There were significant differences of SNR values among CDR, Digora and film scan(P<0.05). 3. There were significant differences of SNR values between 60kVp and 70kVp in seven interpolation methods. There were significant differences of SNR values between facet model method and those of the other methods at 60kVp(P<0.05), but there were not significant differences of SNR values among seven interpolation methods at 70kVp(P>0.05). 4. There were significant differences of MTF coefficient values between linear interpolation method and the other six interpolation methods (P< 0.05). 5. The speed of computation time was the fastest with nearest -neighbor method and the slowest with non-linear method. 6. The better image was obtained with cubic convolution, cubic spline and gray segment method in ROC analysis. 7. The better sharpness of edge was obtained with gray segment expansion method among seven interpolation methods.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2010

This research was conducted to investigate difference of internal temperature, humidity, and plant growth according to covering materials in sweet pepper's greenhouse. For growing period, daily mean internal temperature was not different between glass (GH) and plastic film house (PH), but the changed volume was more PH than GH. Internal humidity deficit was more PH than GH as that was 4.3 $g{\cdot}m^{-2}$ and 5.6 $g{\cdot}m^{-2}$, respectively. In change of internal temperature effected by different intensity of external light, that of PH was fasted twice that of GH, and that's tendency was effected by difference of internal temperature for several hours after sunrise. Leaf growth and photosynthetic product were more GH than PH, productivity of GH was better 80 percents than PH. As results, To improve productivity in PH compared with productivity in GH need to be the detailed managements of internal environmental factors in early period after sunrise.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2014

This work was conducted to investigate the field growth and yield of the sweetpotato (Ipomoea batatas) slips grown under different light emitting diodes (LEDs). Sweet potato cuttings of 3 cultivars ('Matnami', 'Shinhwangmi', and 'Yeonhwangmi') were cultivated under fluorescent lamp (FL) and several LEDs (PPF $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ at 20cm distance) in deep flow culture system for 20 days. The plants were acclimatized under sunlight for 10 days, and then cuttings (30cm length) were planted with $75{\times}25cm$ planting density on June 10th, covered with black vinyl film during growth period. Length and diameter of vine, number of root were excellent in the red plus blue (7:3) LED than the other treatments. At 30 days after planting, the survival rate in red plus blue (7:3) LED was significantly higher than that in FL and red LED, and it was not different among cultivars. Vine length, vine diameter, and number of node were not significant among LED light qualities and cultivars. After 120 days in the field cultivation, vine length, vine diameter, number of node, number of branch, and fresh weight of shoot were not significant among LED light qualities, but those except the number of branch showed significant differences among cultivars. Yield characteristics among LED light colors were not significant, but weight of storage root per plant, mean weight of storage root, and yield showed significant differences among cultivars. The yield per 10a in 'Matnami', and 'Yeonhwangmi' was significantly higher than that in 'Shinhwangmi'.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2007

This study was carried out to develop the stable plug seedling production for hydroponics of spinaches by various nursery media, plug tray size and seed number per plug tray cell. When plant grown in various nursery media, the seeding stand rate was shown in order of granular rockwool with good water retention, granular rockwool>granular rockwool mixed with pearlite>cocopeat>pearlite>poly urethane foame. Thus, poly urethane foame indicated the lower seedling stand rate. There was no difference in growth of the seedlings md the seeding stand rate by the plug tray size, and no significant difference in the plant height and the number of leaves among the seed number per plug tray cell. But, leaf area of plant in 2 grains seeding per cell was $113.0cm^2$, was wider in compared with 5 grains seeding of which leaf area was $88.0cm^2$. Accordingly, the leaf area per plant decreased as more and more the number of seeds per plug tray cell increased. The fresh weight of a plant per plug tray cell was the heaviest with 12.5g in the 2 grains, and the total fresh weight of plants per cell was 33.9g in 4 grains seeding, thus it tended to was bigger compared with other treatments. Consequently, given that the number of seeds per cell was decreased, the fresh weight of a plant increased. On the other hand, the total fresh weight per cell showed a tendency to be reducing as more and more the number of seeds per plug tray cell decreased. The yield in the 4 grains seeding was increased by 46% as $14,910kg{\cdot}ha^{-1}$ in compared with the yield in 2 grains seeding as $10,200kg{\cdot}ha^{-1}$.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.67-71
• /
• 2007

This study was conducted to find out the influence of cultivation season for fresh parsley in modified atmosphere storage. As the qualities of fresh parsley grown in different seasons; autumn, winter, summer were compared, the chlorophyll and vitamin C showed the highest content in autumn and winter cultivation, respectively, but the firmness was the highest in summer cultivation treatment. These fresh parsleys grown in different seasons packaged with 0.04mm ceramic film and stored at $0^{\circ}C$. The shelf life of these parsleys were 84 days in winter cultivation treatment, while parsleys cultivated in autumn and summer were able to be stored for 77 days and 56 days, respectively. The fresh weight loss of parsley was much more higher in summer than in both autumn and winter cultivation treatments. The carbon dioxide and ethylene contents in packages in summer were more than twice as high in autumn and winter cultivation treatment. There were not different between autumn and winter cultivation treatment in the two kinds of gas contents. This result should be caused by higher field heat that increased a respiration remarkably during the early storage. The highest field heat produced by summer cultivation resulted in remarkable decreases of firmness, chlorophyll and vitamin C during MA storage. As the results, the fresh parsley showed highest storability in winter cultivation treatment. The field heat of fresh parsley should be eliminated just after harvest for a long term storage.