• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.90-95
• /
• 2005

Lactic acid bacteria were isolated from silage, which produce high level of hydrogen peroxide in cell culture supernatant. The 16S rDNA sequences of the isolate matched perfectly with that of Lactobacillus fermentum (99.9%), examined by a 16S rDNA gene sequence analysis and similarity search using the GenBank database, thus named L. fermentum CS12-1. L. fermentum CS12-1 showed resistance to low pH and bile acid. The production of hydrogen peroxide by L. fermentum CS12-1 was confirmed by catalase treatment and high-performance liquid chromatography. L. fermentum CS12-1 accumulated hydrogen peroxide in culture broth as cells grew, and the highest concentration of hydrogen peroxide reached 3.5 mM at the late stationary growth phase. The cell-free supernatant of L. fermentum CS12-1 both before and after neutralization inhibited the growth of enterotoxigenic Escherichia coli K88 that causes diarrhea in piglets.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.547-552
• /
• 2010

The recent bloom of a very large jellyfish Nemopilema nomurai has caused a danger to sea fishery and sea bathers. Presently, Nemopilema nomurai is thrown away through a separator system in the sea. The objective of this work was to produce bio-gas from Nemopilema nomurai by using anaerobic digestion. The bio-gas includes the hydrogen or the methane gases. It relates that Nemopilema nomurai is effectually changed into the renewable energy. When the jellyfish biomass was used as an organic carbon source the bio-gases were evolved. The aim of this study was to determine the optimal conditions for hydrogen and methane gases production according to the substrate concentrations of Nemopilema nomurai, optimal culture condition and the sludge-pretreatment without pH control. The optimal culture condition was found to be $35^{\circ}C$ and the heat-treatments of jellyfish was done at $120^{\circ}C$ for 30 min. The production rate of hydrogen and methane gas were found to be 8.8 mL/L/h, 37.2 mL/L/h from 1.5 g of dry Nemopilema nomurai.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.299-306
• /
• 2005

Anaerobic fermentation of food waste (FW) and waste activated sludge (WAS) for hydrogen production was performed in CSTR (Continuous Stirred tank reactor) under various HRTs and volumetric mixing ratio (V/V) of two substrates, FW and WAS. The specific hydrogen production potential of FW was higher than that of WAS. However, pH drop in the CSTR for hydrogen production from FW was higher than that from WAS. The maintenance of desired pH during fermentative hydrogen production is regarded as the most important operation parameter for the stable hydrogen production. Therefore, when the potential of hydrogen production from FW and better buffer capacity of WAS, the proper mixture of FW and WAS for fermentative hydrogen production were considered as a useful complementary substrate. The maximum yield of specific hydrogen production, 140 mL/g VSS, was found at HRT of 2 day and the volumetric mixing ratio of 20:80 (WAS : FW). The spatial distribution of hydrogen producing bacteria was observed in anaerobic fermentative reactor using fluorescent in situ hybridization (FISH) method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.683-687
• /
• 2006

This research investigated the effect of aeration pretreatment for anaerobic seed sludge on hydrogen production. Aeration time for anaerobic sludge was maintained at 0, 1, 3, 6, 12, and 24 hours in batch tests. Two continuous anaerobic reactors (aerated and non-aerated) were also operated. All experiments were conducted at $35^{\circ}C$ using mineral salts-glucose (20 g/l) medium. Methane production decreased with the increase in aeration time. Aeration for 6 hours was determined as an optimum from the amount of hydrogen produced. Hydrogen was steadily produced in the continuous reactor seeded with aerated sludge while no methane production was observed. However, small amount of hydrogen was produced in the non-aerated reactor for short period of time from the start even though short HRT (2 days) and low pH (5.5) were maintained.

• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.96-106
• /
• 2006

Among several different hydrogen production technologies, solar hydrogen system for water splitting is the only clean and sustainable energy supplier. Hydrogen production by water-splitting utilizing solar energy has attracted considerable interest since the pioneering work of Honda and Fujishima in 1979, who discovered that water can be photo-electrochemically decomposed into hydrogen and oxygen using a semiconductor ($TiO_2$) electrode under UV irradiation. Most efforts to utilize solar ray lead to explore visible responding photocatalysts, PEC cells and other fusion technology like bio-photocatalytic conversion. In this paper, photon utilization technologies for water splitting have been briefly reviewed except solar thermal utilization technology.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.142-150
• /
• 2009

This paper presents bio-ethanol production from fruit wastes as it possibly alternate fossil fuel in the future. To illustrate the component ratio in exocarps of fruit wastes such as pears, apples, and persimmons, the amount of moisture, lignin, $\alpha$, $\beta$, $\gamma$-cellulose, and ash content were respectively examined by the ingredient analysis. Also, the amount of the glucose obtained from the enzyme hydrolysis using the axocarps was investigated. It was found in our results that the energy efficient process requires different temperature conditions for the saccharification step($50^{\circ}C$ and the fermentation step($30^{\circ}C$ in ethanol synthesis.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.1
• /
• pp.34-41
• /
• 2002

CdS and $TiO_2$ nanoparticles were made by the precipitation method and sol-gel method, respectively, and they were mixed mechanically and then treated with the hydrothermal processing. CdS-$TiO_2$ composite particulate films were thus prepared by casting CdS-$TiO_2$ mixed sol onto $SnO_2$ conducting glass and a subsequent heat-treatment at $400^{\circ}C$. Again, the physico-chemical and photoelectrochemical properties of these films were controlled by the surface treatment with $TiCl_4$ aqueous solution. The photocurrents and the hydrogen production rates measured under the present experimental conditions varied in the range of $3.5{\sim}4.5mA/cm^2$ and $0.3{\sim}1.8cc/cm^2$-hr, respectively, and showed the maximum values at the $CdS/[CdS+TiO_2]$ mole ratio of 0.2. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, Probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$ It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.224-232
• /
• 2002

CdS-$TiO_2$ nano-composite sol was prepared by the sol-gel method in organic solvents at room temperature and further hydrothermal treatment at various temperatures to control the physical properties of the primary particles. Again, CdS-$TiO_2$ composite particulate films were made by casting CdS-$TiO_2$ sols onto $F:SnO_2$ conducting glass and then heat-treatment at $400^{\circ}C$. Physical properties of these 61ms were further controlled by the surface treatment with $TiCl_4$, aqueous solution. The photo currents and hydrogen production rates measured under the experimental conditions varied according to the $CdS/[CdS+TiO_2]$ mole ratio and the mixed-sol preparation method. For $CdS-TiO_2$ composite sols prepared in IPA, CdS particles were homogeneously surrounded by $TiO_2$ particles. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$. It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2005.05a
• /
• pp.205.1-205
• /
• 2005

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2014

This study was conducted to investigate the effect of thermal pre-treatment on bio-hydrogen from food waste. Two continuous reactors operated and VFAs(volatile fatty acids) production and microbial communities were analyzed. The average hydrogen yield was 0.50 and 0.33mol $H_2/mol$ $hexose_{added}$ in thermally treated food added reactor(R1) and control(R2), respectively. Butyrate concentration was similarly 7,500mg/L in both reactors, but two times higher lactate concentration was observed in R2(3,800mg/L). The results of FISH(fluorescence in situ hybridization) showed that the relative microorganism to hydrogen producing bacteria was 78 and 27% in R1 and R2, respectively.