• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.11
• /
• pp.491-494
• /
• 2006

In the adder design, reduction of the delay of the carry propagation or ripple is the most important consideration. Previously, it was introduced that, if a redundant number system is adopted, the carry propagation is completely eliminated, with which addition can be done in a constant time, without regarding to the count of the digits of numbers involved in addition. In this paper, a RBCD(Redundant Binary Coded Decimal) is adopted to code 0 to 11, and an efficient and economic carry-free BCD adder is designed.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.700-704
• /
• 2013

Quantum-dot cellular automata(QCA) is a new technology and it is an one of the alternative high performance over existing complementary metal-oxide semi-conductor(CMOS). QCA is nanoscale device and ultra-low power consumption compared with transistor-based technologies, and various circuits using QCA technology have been proposed. Binary-coded decimal(BCD), which represents decimal digits in binary, is mainly used in electronic circuits and Microprocessor, and it is comfortable in conversion operation but many data loss. In this paper, we present an BCD-EXCESS 3 Code converter which can be efficiently used for subtraction and half adjust. The proposed scheme has efficiently designed considering space and time complexities and minimization of noise, and it has been simulated and confirmed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.5
• /
• pp.241-249
• /
• 2003

Carry lookahead(CLA) circuitry of decimal adders is proposed aiming at delay reduction. The truncation error in calculation of monetary interests may accumulate yielding a substantial amount of errors. Binary Coded Decimal(BCD) additions. for example, eliminate the truncation error in a fractional representation of decimal numbers. The proposed BCD carry lookahead scheme is aiming at the speed improvements without any truncation errors in the addition of decimal fractions. The delay estimation of the BCD CLA is demonstrated with improved performance in addition. Further reduction in delay can be achieved introducing non-weighted number system such as the excess-3 code.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.60-67
• /
• 2008

An all-optical 4-bit Gray code to binary coded decimal (BCD) converter by means of commercially available numerical analysis tool (VPI) was demonstrated, for the first time to our knowledge. Circuit design approach was modified appropriately in order to fit the electrical method on an all-optical logic circuit based on a cross gain modulation (XGM) process so that signal degradation due to the non-ideal optical logic gates can be minimized. Without regenerations, Q-factor of around 4 was obtained for the most severely degraded output bit (least significant bit-LSB) with 2.5 Gbps clean input signals having 20 dB extinction ratio. While modifying the two-level simplification method and Karnaugh map method to design a Gray code to BCD converter, a general design concept was also founded (one-level simplification) in this research, not only for the Gray code to BCD converter but also for any general applications.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1113-1129
• /
• 2021

Lightweight ciphers are increasingly employed in cryptography because of the high demand for secure data transmission in wireless sensor network, embedded devices, and Internet of Things. The PRESENT algorithm as an ultralightweight block cipher provides better solution for secure hardware cryptography with low power consumption and minimum resource. This study generates the key using key rotation and substitution method, which contains key rotation, key switching, and binary-coded decimal-based key generation used in image encryption. The key rotation and substitution-based PRESENT architecture is proposed to increase security level for data stream and randomness in cipher through providing high resistance to attacks. Lookup table is used to design the key scheduling module, thus reducing the area of architecture. Field-programmable gate array (FPGA) performances are evaluated for the proposed and conventional methods. In Virtex 6 device, the proposed key rotation and substitution PRESENT architecture occupied 72 lookup tables, 65 flip flops, and 35 slices which are comparably less to the existing architecture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.1-6
• /
• 1988

For the purpose of making the detection range of fish detection system more longer and computerizing the system a parametric sound source, a timer and a digitizing circuit for the Apple II computer have been studied. The parametric sound of 5 KHz generated by passing AND gate two signals from carrier signal generator of 200KHz with modulator of 5KHz. This parametric acoustic source of 5KHz difference frequency had more higher directional resolution of 10 degrees than single frequency sound of 200KHz. Peripheral interface adaptor MC 6821 was adopted for interfacing to the Apple II personal computer. The timer consisted of six decade binary coded decimal counters (74 LS 190), and the digitizing circuit consisted of a sample and hold (LF 398) and an A/D converter(ADC 0808). The timer with 10KHz clock pulse had the measuring time from 0.1msec to 100sec. This time measuring range was satisfactory for the aim of the fish finding acoustic system.