• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.96-105
• /
• 1992

The use of fixed-point digital signal processors, such as the TMS 320C25, requires scaling of data at each arithmetic step to prevent overflows while keeping the accuracy. A software which automatizes this process is developed for TMS 320C25. The programmers use a model of a hypothetical floating-point digital signal processor and a floating-point format for data representation. However, the program and data are automatically translated to a fixed-point version by this software. Thus, the execution speed is not sacrificed. A fixed-point variable has a unique binary-point location, which is dependent on the range of the variable. The range is estimated from the floating-point simulation. The number of shifts needed for arithmetic or data transfer step is determined by the binary-points of the variables associated with the operation. A fixed-point code generator is also developed by using the proposed automatic scaling software. This code generator produces floating-point assembly programs from the specifiations of FIR, IIR, and adaptive transversal filters, then floating-point programs are transformed to fixed-point versions by the automatic scaling software.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.247-256
• /
• 2001

Digital watermarking is a copyright protection technique for digital images which embed a code into the digital data so the data is marked. Watermarking techniques previously deal with on-line digital data and have been developed to withstand digital attacks such image processing, compression and geometric transformation. In this paper we propose a novel method of embedding watermarks in printed images. In the proposed algorithm, watermark is embedded in a dithered binary image by comparing the $2\times{2}$ blocks of the counting array is the number of 1 (WHITE) in the $16\times{16}$ blocks of the dithered binary image with predefined reference block pattern, which is generated by watermark values. The proposed algorithm is able to provide more information at a watermark because the proposed algorithm use both '1'and '0' as watermark values. The watermark information is detected by comparing the watermark which is reconstructed from the image which is embedded watermark with the original watermark which is embedded in a binary image. The performance of the proposed algorithm is compared with that of the conventional watermark embedding algorithm for printed images by detecting watermark for scan images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.382-390
• /
• 2005

Huffman codes are widely used for image and video data transmission. As the increase of real-time data, a lot of studies on effective decoding algorithms and architectures have been done. In this paper, we proposed a balanced binary search tree for Huffman decoding and compared the performance of the proposed architecture with that of previous works. Based on definitions of the comparison of codewords with different lengths, the proposed architecture constructs a balanced binary tree which does not include empty internal nodes, and hence it is very efficient in the memory requirement. Performance evaluation results using actual image data show that the proposed architecture requires small number of table entries, and the decoding time is 1, 5, and 2.41 memory accesses in minimum, maximum, and average, respectively.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.371-379
• /
• 2005

Adsorption equilibria of the gases $H_2$, $CH_4$, and $C_2H_4$ and their binary mixtures on activated carbon (Calgon co.) have been measured by static volumetric method in the pressure range of 0 to 18 atm at temperatures of 293.15, 303.15, and 313.15 K. From the parameters obtained from single component adsorption isotherm, multi-component adsorption equilibria could be predicted and compared with experimental data. The binary experimental data were applied to four models : extended Langmuir, extended Langmuir-Freundlich, Ideal Adsorbed Solution theory (IAST), and Vacancy Solution Model (VSM). The models were found to describe the experimental data with a reasonable accuracy. Extended L-F model predicts equilibria of mixture better than any other model.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.121-126
• /
• 2007

This paper describes a 9.09 Gb/s CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with Samsung $0.35{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the post layout simulation. The demultiplexer is achieved the maximum data rate of 9.09 Gb/s and the average power consumption of 69.93 mW. This circuit is expected to operate at higher speed than 9.09 Gb/s in the deep-submicron process of the high operating frequency.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.129-133
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time. Today any data storage system cannot satisfy these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanical actuating part therefore fast data transfer rate and high storage capacity about $1Tb/cm^3$ can be realized. In this paper, to reduce errors of binary data stored in holographic data storage system, a new method for bit error reduction is suggested. First, find cluster centers using subtractive clustering algorithm then reduce intensities of pixels around cluster centers and fuzzy rules. Therefore, By using this error reduction method following results are obtained ; the effect of Inter Pixel Interference noise is decreased and the intensity profile of data page becomes uniform therefore the better data storage system can be constructed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.281-288
• /
• 2014

QR code (abbreviated from Quick Response Code) is code system that is strong in against to apply image processing techniques (skew, warp, blur, and rotate) as QR codes can store several hundred times the amount of information carried by ordinary bar codes. For this reason, QR code is used in various fields, e.g., air ticket (boarding control system), food(vegetables, meat etc.) tracking system, contact lenses management, prescription management, patient wrist band (patient management) etc. In this paper, we proposed reversible data hiding for binary images. A reversible data hiding algorithm, which can recover the original image without any distortion from the marked (stego) image after the hidden data have been extracted, because it is possible to use various kinds of purposes. QR code can be used to generate by anyone so it can be easily used for crime. In order to prevent crimes related QR code, reversible data hiding can confirm if QR code is counterfeit or not as including authentication information. In this paper, we proved proposed method as experiments.

• Convergence Security Journal
• /
• v.15 no.7
• /
• pp.75-84
• /
• 2015

In an "NTFS Index Record Data Hiding" method messages are hidden by using file names. Windows NTFS file naming convention has some forbidden ASCII characters for a file name. When inputting Hangul with the Roman alphabet, if the forbidden characters for the file name and binary data are used, the codes are convert to a designated unicode point to avoid a file creation error due to unsuitable characters. In this paper, the problem of a file creation error due to non-admittable characters for the file name is fixed, which is used in the index record data hiding method. Using Hangul with Roman alphabet the characters cause a file creation error are converted to an arbitrary unicode point except Hangul and Roman alphabet area. When it comes to binary data, all 256 codes are converted to designated unicode area except an extended unicode(surrogate pairs) and ASCII code area. The results of the two cases, i.e. the Hangul with Roman alphabet case and the binary case, show the applicability of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.75-87
• /
• 2011

Tactical Data Links are standardized radio communication data links for military armed forces and used to transmit and receive data. Because they are the core elements of achieving information superiority in a NCW environment, various kinds of TDL are used by the Korean armed forces. Operating various types of TDL is very helpful in getting more information; however, at the same time, it is hard to integrate and make them co-operate with other TDLs or C4ISR systems. In this paper, we propose a XML based messaging system to make various types of TDL interoperable in a NCW environment. For the messaging system between TDL and C4ISR systems, we define XML message processing interfaces and suggest binary XML for serialization to save transmission loads over constrained military communication bandwidth. Our experiment results show that the TDL message can be transformed into generalized XML data that is interoperable with other TDLs and binary XML serialization, and it saves parsing and transmission time.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.129-138
• /
• 2002

This paper deals with logistic regression models for analysing separation rates from majors. The model building procedure shows how to incoporate the effects of some factors causing from three-way nested sampling scheme and discusses what type of characteristics as independent variables directly affecting the rates should be considered.