• 제목/요약/키워드: Binary Systems

검색결과 1,167건 처리시간 0.029초

오염물질에 대한 입상 활성탄의 흡·탈착 모델링 (Adsorption-Desorption Modeling of Pollutants on Granular Activated Carbon)

  • 왕창근
    • 대한토목학회논문집
    • /
    • 제13권2호
    • /
    • pp.279-285
    • /
    • 1993
  • 여러 오염물질 사이의 흡착 경쟁, 평형, 물질확산의 상호 연관성을 이해하는 것은 효율적인 활성탄 흡착탑 설계 및 운전을 위하여 중요하다. 흡착탑내에서의 오염물질의 확산 및 흡착 현상을 동역학적 및 수학적으로 예측하기 위하여 "Micro-Diameter-Depth Adsorption System" Technique을 개발하여 평형 및 물질확산 계수들을 측정하였다. 활성탄 입자의 외부 "Film Transfer"와 입자 내부에서의 "Surface Diffusion"을 고려한 오염 물질 사이의 흡착경쟁, 탈착, Chromatographic Displacement Effect 등을 Homogeneous Surface Diffusion Model(HSDM)을 이용하여 예측했다. p-Chlorophenol(PCP)/p-Nitrophenol(PNP)의 Breakthrough Curve에서 PCP는 PNP에 의해 Displace되는 현상을 볼 수 있었으며 HSDM은 이를 잘 예측하였다. Dodecylbenzenesulfonate (DBS)는 흡착된 DBS의 일부분이 비가역적 흡착반응을 보인다는 가정하에서 HSDM에 의해 잘 예측될 수 있었다.

  • PDF

에탄올-물 혼합용매내에서의 p-니트로벤질클로라이드의 가용매 분해반응에 대한 압력의 영향 (The Effect of Pressure on the Solvolysis Reaction of p-Nitrobenzyl Chloride in Binary Mixture of Ethanol-Water)

  • 권오천;김정림;유지철
    • 대한화학회지
    • /
    • 제25권3호
    • /
    • pp.152-159
    • /
    • 1981
  • p-니트로벤질클로라이드의 가용매분해 반응속도를 50 와 $60{\circ}C$에서 압력을 1∼1200bar로 변화시키고 에탄올-물 혼합용매의 조성이 0.0∼0.5인 에탄올 몰분율의 범위내에서 전기전도도법으로 측정하였다. 반응의 속도상수로부터 활성화 파라미터, ${\Delta}V_\0^{\neq},\ {\Delta}H^{\neq}$${\Delta}S^{\neq}$를 구한결과 ${\Delta}V_\0^{\neq}$는 혼합용매의 몰분율이 0.3부근에서 extremum을 나타내었고 ${\Delta}H^{\neq}$${\Delta}S^{\neq}$는 0.1 부근에서 extremum을 나타내었다. 이러한 현상은 용매구조의 변화에 의하여 검토되었고 ${\Delta}V^{\neq}$의 압력의존성도 고찰하였다. ${\Delta}H^{\neq}$${\Delta}S^{\neq}$이 압력의존성은 그 부호에 있어서 고전열역학계에 대한 Maxwell관계의 식과 일치함을 보여주었다.

  • PDF

Perception and production of Korean and English stops by bilinguals with extensive experience residing in the U.S.: Individual patterns

  • Oh, Eunjin
    • 말소리와 음성과학
    • /
    • 제9권3호
    • /
    • pp.33-40
    • /
    • 2017
  • This study aimed to examine how Korean-English bilinguals make use of VOT and F0 cues in perception and production of Korean (lenis vs. aspirated) and English (voiced vs. voiceless) stops. It was explored whether bilinguals with extensive experience living in the U.S. exhibit native-like or interactive patterns in the cue use for both languages. Participants produced monosyllabic word-initial stops within a carrier sentence in each language, and performed forced-choice identification tasks with synthesized stimuli varying in 7 VOT steps and 7 F0 steps with base tokens of /$t^han$/ for Korean and /$t{\ae}n$/ for English. Listeners were required to select either /tan/ or /$t^han$/ for Korean and either /$d{\ae}n$/ or /$t{\ae}n$/ for English. The results from binary logistic regression analyses for each listener indicated that all bilinguals placed greater weight on F0 than VOT when distinguishing between the Korean lenis and aspirated stops, and greater weight on VOT than F0 in distinguishing between the English voiced and voiceless stops. In terms of production, all participants showed remarkably overlapping ranges in the VOT dimension and separating ranges in the F0 dimension for the stop contrast of Korean, while forming overlapping ranges in the F0 dimension and separating ranges in the VOT dimension for the stop contrast of English. These results indicate that the bilinguals with extensive exposure to L2 manage the stop systems of the two languages independently, both in perception and production, employing the opposite cue use for stops in the two languages. It was also found that the absolute beta-coefficient values of the perceptual cues for Korean stops were generally smaller than those for English and those reported in a previous study as for later bilinguals, which may have resulted from Korean not being their dominant language.

저전력 기술 매핑을 위한 논리 게이트 재합성 (Resynthesis of Logic Gates on Mapped Circuit for Low Power)

  • 김현상;조준동
    • 전자공학회논문지C
    • /
    • 제35C권11호
    • /
    • pp.1-10
    • /
    • 1998
  • 휴대용 전자 시스템에 대한 deep submicron VLSI의 출현에 따라 기존의 면적과 성능(지연시간)외에 전력량 감축을 위한 새로운 방식의 CAD 알고리즘이 필요하게 되었다. 본 논문은 논리합성시 기술매핑 단계에서의 전력량 감소를 목적으로 한 논리 게이트 분할(gate decomposition)을 통한 재합성 알고리즘을 소개한다. 기존의 저전력을 위한 논리분할 방식은 Huffman 부호화 방식을 이용하였으나 Huffman code는 variable length를 가지고 있으며 logic depth (회로지연시간)와 글리치에 영향을 미치게 된다. 제안된 알고리즘은 임계경로상에 있지 않은 부회로에 대한 스위칭 동작량을 줄임으로써 logic depth (즉 속도)를 유지하면서 다양한 재구성된 트리를 제공하여 스위칭 동작량을 줄임으로써 전력량을 감축시키는 새로운 게이트분할 알고리즘을 제안한다. 제안된 알고리즘은 zero 게이트 지연시간을 갖는 AND 트리에 대하여 스위칭 동작량이 최소화된 2진 분할 트리를 제공한다. SIS (논리합성기)와 Level-Map (lower power LUT-based FPGA technology mapper)과 비교하여 각각 58%와 8%의 전력 감축효과를 보였다.

  • PDF

Analog active valve control design for non-linear semi-active resetable devices

  • Rodgers, Geoffrey W.;Chase, J. Geoffrey;Corman, Sylvain
    • Smart Structures and Systems
    • /
    • 제19권5호
    • /
    • pp.487-497
    • /
    • 2017
  • Semi-active devices use the building's own motion to produce resistive forces and are thus strictly dissipative and require little power. Devices that independently control the binary open/closed valve state can enable novel device hysteresis loops that were not previously possible. However, some device hysteresis loops cannot be obtained without active analog valve control allowing slower, controlled release of stored energy, and is presents an ongoing limitation in obtaining the full range of possibilities offered by these devices. This in silico study develops a proportional-derivative feedback control law using a validated nonlinear device model to track an ideal diamond-shaped force-displacement response profile using active analog valve control. It is validated by comparison to the ideal shape for both sinusoidal and random seismic input motions. Structural application specific spectral analysis compares the performance for the non-linear, actively controlled case to those obtained with an ideal, linear model to validate that the potential performance will be retained when considering realistic nonlinear behaviour and the designed valve control approach. Results show tracking of the device force-displacement loop to within 3-5% of the desired ideal curve. Valve delay, rather than control law design, is the primary limiting factor, and analysis indicates a ratio of valve delay to structural period must be 1/10 or smaller to ensure adequate tracking, relating valve performance to structural period and overall device performance under control. Overall, the results show that active analog feedback control of energy release in these devices can significantly increase the range of resetable, valve-controlled semi-active device performance and hysteresis loops, in turn increasing their performance envelop and application space.

효율적인 다중 버전 ADS-B 타깃 리포트 메시지 처리를 위한 모듈 설계 및 구현 (Design and Implementation for Efficient Multi Version ADS-B Target Report Message Processing)

  • 김강희;장은미;송인성;조태환;최상방
    • 한국항행학회논문지
    • /
    • 제19권4호
    • /
    • pp.265-277
    • /
    • 2015
  • ADS-B (automatic dependent surveillance-broadcast)는 차세대 항행시스템 CNS/ATM (communication, navigation and surveillance/air traffic management)의 핵심기술로 위성항법시스템 정보를 이용하여 자신의 위치 정보를 자동으로 방송하며, 기존 레이더 시스템에 비해 지형에 의한 제약이 적고 갱신 속도가 빠르다는 장점을 가지고 있다. EUROCONTROL에서는 항공관제시스템에서 ADS-B 메시지를 교환하기 위하여 표준 감시자료 포맷 ASTERIX (all purpose structured eurocontrol surveillance information exchange) CAT.021을 정의하였다. 그러나 ASTERIX CAT.021은 업데이트 주기가 빠르고 이전 버전과 호환이 되지 않는 문제가 있다. 본 논문에서는 ASTERIX CAT.021의 버전과 관계없이 효율적으로 메시지를 처리하는 모듈을 설계 및 구현하였다. 구현 모듈은 네트워크로부터 수신한 메시지를 수집하여 패턴을 생성하고, 이후 수신 메시지는 패턴에 따라 정의된 루틴으로 처리한다.

주택분양사업장의 주택분양보증사고 발생요인 분석 (An Analysis on the Accident Factors of the Housing Sold Guarantee in Housing Development Projects)

  • 곽경섭;백성준
    • 지적과 국토정보
    • /
    • 제44권2호
    • /
    • pp.231-242
    • /
    • 2014
  • 주택의 착공과 동시에 수분양자에게 주택을 분양하는 주택선분양제에서는 사업자가 분양의무를 이행하지 못할 위험이 항상 존재한다. 이러한 위험으로부터 수분양자를 보호하기 위해 주택분양보증제도가 도입 운영되고 있으나, 주택분양보증사고가 발생하면 수분양자 피해발생 등 여러 문제점이 발생한다. 따라서 주택분양보증사고에 대한 관심이 높지만, 지금까지 주택분양보증사고 발생요인에 대한 연구는 별로 없었다. 본 연구는 이러한 배경에서 주택분양보증사업의 사업장 특성과 사업자 특성 등의 자료를 기초로 주택분양보증사고에 영향을 미치는 요인을 분석하고 예측모형 개발의 가능성을 검토하였다. 분석방법으로는 이항로지스틱 회귀모형을 사용하였다. 분석결과 주택분양보증사고 발생은 주택분양사업장 소재지, 사업유형, 건설하는 주택의 유형, PF대출보증 유무 등의 사업장 특성과 시행사 시공사 신용등급, 주택건설 착공연도 등에 영향을 받는 것으로 나타났다.

AIS-ASM 기반 신규 서비스 도입을 위한 선행 연구 (Preliminary Researches for the Deployment of New AIS-ASM Services)

  • 김건웅;박계각
    • 한국정보통신학회논문지
    • /
    • 제17권7호
    • /
    • pp.1515-1521
    • /
    • 2013
  • AIS는 해양안전 분야의 핵심서비스이다. 그 중 바이너리 메시지를 전달하는 6번 메시지와 8번 메시지를 활용한 다양한 서비스들이 등장하고 있으며, 이에 MSC는 2010년 AIS-ASM 사용에 대한 권고를 발표한 바 있다. AIS-ASM을 통한 해양안전정보 제공은 해양사고 예방이나 안전 제고 등에 기여할 수 있지만, 새로운 서비스가 VDL에 추가 부하를 가져올 수 있으므로 서비스 도입 절차가 반드시 필요하다. 본 논문에서는 AIS-ASM 서비스 분석을 통해 각 서비스를 도입하기 위해 확장되어야 하는 기능 또는 체계들을 정리하고, 지속적으로 수집한 AIS 정보 분석을 통해 현행 AIS 운용 환경을 관찰한 결과를 소개한다. 또한 이를 바탕으로 신규 AIS-ASM 서비스 도입을 위해 수행하여야 하는 선결 연구주제들을 정리한다. VDL 활용 감시시스템, 비정상 AIS 기기 감지 및 제거, 해양안전서비스 가치분석 등이 요구된다.

DVB-RCS Next Generation을 위한 터보 부복호화 방식 분석 (Analysis of Turbo Coding and Decoding Algorithm for DVB-RCS Next Generation)

  • 김민혁;박태두;임병수;이인기;오덕길;정지원
    • 한국통신학회논문지
    • /
    • 제36권9C호
    • /
    • pp.537-545
    • /
    • 2011
  • 본 논문은 DVB-RCS NG(Next Generation) 에서 제안된 3차원 터보 부호와 터보 ${\Phi}$부호를 각 부호화율에 따라 성능 비교 분석하였다. 터보 ${\Phi}$ 부호에 있어서 기존의 이중 바이너리 구조에서 3진 바이너리 구조로 확장 될 때, 최적의 치환 패턴과 천공 패턴 분석을 제시하였다. 또한 3차원 터보 부호에서, post-encoder의 형태, 인터리빙 기법에 따라 성능이 달라지므로 각 파라메타에 대한 최적의 값을 제시하였다. 최적의 파라메타 설정을 근거로 성능분석 결과 터보 ${\Phi}$ 부호와 3차원 터보 부호가 기존의 DVB-RCS 터보 부호가 가지고 있었던 오류 마루 현상을 극복함을 알 수 있었고 터보 ${\Phi}$ 부호가 3차원 터보 부호에 비해 성능이 약간 우수하나 계산량 측면에서는 약 18% 정도가 복잡한 것을 알 수 있었다.

기계시각을 이용한 고단 직립식 산란계 케이지의 유선 감시시스템 개발 (Development of Wired Monitoring System for Layers Rearing in Muti-tier Layers Battery by Machine Vision)

  • 정쌍양;장동일;이승주;소재광
    • Journal of Biosystems Engineering
    • /
    • 제31권5호
    • /
    • pp.436-442
    • /
    • 2006
  • This research was conducted to design and develop a wired monitoring system for judging if sick or dead layers (SDL) exist in multi-tier layers battery (MLB) by machine vision, and to analyze its performance. In this study, 20 Brown Leghorn (Hi-Brown) layers aged 37 weeks old, were used as the experimental animals. The intensity of concern paid by layers on feed was over 90% during 5 minutes and 30 seconds after providing feed, and normal layers (NL) had been standing to take feed for that period. Therefore, in this study, the optimal judging time was set by this test result. The wired monitoring system developed was consisted of a driving device for carrying machine vision systems, a control program, a RS232 to RS485 convertor, an automatic positioning system, and an image capture system. An image processing algorithm was developed to find SDL in MLB by the processes of binary processing, erosion, expansion, labeling, and reckoning central coordinate of the captured images. The optimal velocity for driving unit was set up as 0.13 m/s by the test results for wired monitoring system, and the proximity switch was controlled not to be operated for 1.0 second after first image captured. The wired monitoring system developed was tested to evaluate the remote monitoring performance at lab-scale laying hen house. Results showed that its judgement success.ate on normal cage (without SDL) was 87% and that on abnormal cage (with SDL) was 90%, respectively. Therefore, it would be concluded that the wired monitoring system developed in this study was well suited to the purpose of this study.