• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.89-97
• /
• 2002

In this study, the effect of $\alpha$-phase morphology on the dynamic deformation behavior at ultra high strain rate was investigated by EBW(Explosive Bridge Wire) test. All of tests and analyses were conducted on three typical microstructures of Ti-6Al-4V alloy, i.e. equiaxed, widmanstatten and bimodal microstructures. The spall strength and HEL(Hugoniot Elastic Limit) of the specimens that have the thickness of 2mm and 4mm were highest with the bimodal microstructure. These results were similar with previous study which was performed by dynamic torsion test(Kolsky torsion test).

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2192-2193
• /
• 2011

VCU(Vehicle Control Unit) was developed to decrease the wire weight and make it easy to control the power of ECU in bimodal tram. VCU consists of CC(Central Computer), DU(Display Unit), TU(Terminal Unit) with PCB. CC is a main controller with progamming and DU displays the status with graphic symbols and letters. TU with PCB inputs and output the voltage controlled by CC. They communicate with CAN(Controller Area Network). VCU had been verified with software reliability verification test and environmental hardware test. This paper has shown the test results and application to bimodal tram.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2471-2476
• /
• 2007

A series of titanium complexes containing terdentate β-ketoiminate ligands were found to be efficient for the ring-opening polymerization of ε-caprolactone (ε-CL), producing poly(ε-caprolactone) (PCL) with bimodal distribution. Steric factors imposed by methyl substituents on the back bone of the alkoxy group affected significantly the polymerization rate and physical properties of the resulting PCL. Intra- and intermolecular transesterifications rather than disproportional rearrangements were responsible for the bimodal behavior and for the change in the molecular weight (Mw). Dilution with toluene reduced yield, and lowered polydispersity (PDI) and Mw of PCL, while the catalytic activities of the dimeric complex, [Ti(Oi-Pr)2(N-alkoxy-β- ketoiminate)]2 and Ti(Oi-Pr)4 were not sensitive to the added solvent. The dimeric complex showed living character, while other catalysts suffered from chain termination reactions.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1937-1942
• /
• 2007

Bimodal tram is being developed to be completed in 2010 and the infrastructure needs to be developed to make the operation in time. Through the study of infrastructure reflecting domestic condition, dedicated lane, station, connection center, automated operation, precise docking, ticketing system, information system, management system for operation and maintenance, and refueling station will be developed and their performances will be also verified through the construction of test bed. The economical, safe and environment-friendly operation of the bimodal tram will be established through the present study.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.455-460
• /
• 2010

Recent increases in the road and rail infrastructure, but the urban traffic problems such as accidents, congestion are increasing. The reason is that the high cost and lack of accessibility of railway transportation, the low quality of road services, and efficient transport links, etc.. The developments of a variety of policy and technical means are being performed to solve these problems. Among them, the Bimodal Tram which is combined low-cost of bus and high service quality of railway transportation is attracting attention. In this paper, the development status of technology and efficient utilization of operational and infrastructure elements for the operational efficiency, safety and passenger comfort of Bimodal Tram is studied.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.969-973
• /
• 2007

There have been worldwide efforts to develop environmental-friendly transportation systems, which aim to solve the environmental issues such as pollution with the traffic congestion in downtown. For some developed countries, environmental indicators to estimate their environmental performances as well as eco-design technologies in the field of transportation have been already secured. In Korea, however, relatively fundamental studies which are insufficient to calculate quantitatively the environmental impacts have been performed. In this study, the life cycle assessment was introduced as one of methodologies to evaluate environmental performance and reduce environmental impacts of a bimodal tram system throughout its entire life cycle, including design, manufacture, operation and disuse steps.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1063-1064
• /
• 2008

Bimodal tram has a carbody made of polymer composite material which is good electrical insulator. As an series hybrid type, Alternating voltage generated from generator coupled with CNG engine are rectified and transformed to variable voltage ranges which are applied to electrical apparatus and ECUs equipped inside of the tram. The failures of electrical insulation between high voltage($400V{\sim}800V$) and low voltage(24V) or between different kind of voltages such as AC and DC may cause some electrical interferences to prevent from operating rightly and other safety problem. This paper have investigated about the degradation factors of the electrical insulation and the earthing method available to bimodal tram, which is effective for preventing the electromagnetic interference coming from the inside or outside of tram but need some detecting measurements of earth leakage through electrical systems.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.718-724
• /
• 1999

Densification and grain growth behavior of bimodal size distributed alumina powder mixtures were investigated as a function of amount of coarse alumina powder. The specimens which contained coarse alumina powder for 60to 80wt% showed the highest green density. The amount of shrinkage of sintered specimen lineraly decreased with the increase of coarse alumina powder up to the content that showed the highest green density and then further addition of coarse alumina powder led to drastic decrease of shrinkage of specimen. Especially crack-like void were concurrently revealed in the sintered body with addition of coarse alumina powder above 60wt% When the sintering temperature increased up to 1650$^{\circ}C$ the amount of shrinkage of specimen linearly decreased and the grain growth were also retarded with increase of coarse lauminia powder.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2200-2206
• /
• 2008

This paper describes the results of experiments on the bending behavior of welded square tube structures for drive shaft sub frame of BIMODAL Tram. The used specimens to test were two different type made of ATOS60 and ST52-3. The square tube made of ST52-3 is the non-welded structure, while the square tube made of ATOS60 is the welded structure. The welded square tube made of ATOS60 will be applied for drive shaft sub frame of BIMODAL Tram. This welded square tube could reduce the manufacturing cost in comparison of non-welded square tube. The results showed that the bending performance of welded square tube made of ATOS60 was proven, and the bending behavior was in an good agreement with that of nonlinear finite element analysis.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.147-150
• /
• 2008

Changes in land uses at urbanizing areas are causing flooding, increase in NPS pollutants. Thus, Low Impact Development (LID) concept is now being employed in urban planning for sustainable development. Compared with the conventional BMPs, the LID is a new concept in urban planning to minimize the impacts of urbanization for site-specific LID IMPs. The objective of this study is to analyze the efficiency of LID adoption in study watershed in peak rate runoff and runoff volume reduction perspectives. The analysis revealed that the peak rate runoff and runoff volume decreased significantly with the LID adoption. This indicates that the Bimodal tram route with grass installed at the center of the road will contribute reduction in surface runoff and peak rate runoff, and also in NPS pollutant generation from the Bimodal tram route.