• Journal of the Korean Ceramic Society
• /
• v.34 no.4
• /
• pp.436-442
• /
• 1997

The bimodal distribution of CuCl nano-crystals precipitated in alumino-borosilicate glass matrix (30SiO2-45B2O3-7.5Al2O3-7.5Na2O-7.5CaO-2.5GeO2(mole %)) was investigated by TEM and the temperature dependent optical spectroscopy. Two types of CuCl particles with different size were observed by TEM and it was confirmed by the splitting of Z3 absorption peak at low temperature and the occurrence of deflection point in the optical spectra with temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.292-292
• /
• 2010

Bimodal Tram is driven by both engine and Lithium Polymer battery pack which consists with 168 cells of LPB(80Ah, 650Vdc). LPB pack is very frequently charged and discharged in driving. Temperature inside of LPB pack makes an great effect on both charging and discharging capacity which seem to be related with LPB internal resistance. LPB internal resistance is increasing or little decreasing with the decreased temperature under 10 - $20^{\circ}C$ and the increased temperature over $30^{\circ}C$ which is similar to the temperature characteristics of single LPB cell. This paper has analyzed the driving characteristics of LPB pack for bimodal tram is running with either battery mode or hybrid mode.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1675-1677
• /
• 2007

Bimodal tram with the hybrid propulsion and low floor is a new and beneficial vehicle for the public transportation which is good for both the convenience of the weakness and the prevention of the green house effect. Bimodal tram consists of a complicate electrical and mechanical systems. Each system does not operate with independent but with cooperative. So, we need a synthetic control management system for managing all system effectively. This paper has investigated the configuration and functions of VCU(Vehicle Control Unit) installed inside of bimodal tram which plays variable roles including the apparatus control and the condition monitoring.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.633-637
• /
• 2007

Bimodal Tram is the newly developed vehicle for both the tracked way and the public road. Its operation system has some characteristics including BIS(bus information system)/BMS(bus management system) based on ITS(intelligent Transportation system) which is used presently in public transportation operation system. One of them is more accurate vehicle fleet control based on both magnetic maker position reference system and GPS(global positioning system) and the other is automatic vehicle control for emergency situations by the Bimodal Tram operation system which will be performed by the unified control and operation center. This paper has investigated the requirements and functional definitions necessary to construct the unified control and operation center for Bimodal Tram operation system which will be more efficient and secure public transportation system than the conventional ones.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.3
• /
• pp.164-170
• /
• 2013

Recent years have been higher demands for automatic speech recognition (ASR) systems that are able to operate robustly in an acoustically noisy environment. This paper proposes an improved product hidden markov model (HMM) used for bimodal speech recognition. A two-dimensional training model is built based on dependently trained audio-HMM and visual-HMM, reflecting the asynchronous characteristics of the audio and video streams. A weight coefficient is introduced to adjust the weight of the video and audio streams automatically according to differences in the noise environment. Experimental results show that compared with other bimodal speech recognition approaches, this approach obtains better speech recognition performance.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1968-1977
• /
• 2008

A bimodal low-floor tram is designed to provide the flexibility of bus and the punctuality of trains together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. The present paper describes the specifications of the propulsion system in the bimodal tram which was drawn by a desirable driving cycle. In addition, it shows how the propulsion system of the bimodal tram can be controlled. With using a computer simulation tool of hybrid vehicles, ADVISOR, the performance of the bimodal tram was verified.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2463-2466
• /
• 2008

The public transportation in operation or to be planned domestically includes subway, LRT, bimodal tram and bus, which are independently characterized in their passenger capacity and cost. High quality service is generally accompanied by high cost of construction and operation. Thus, ITS, BIS/BMS and BRT system are recently introduced to provide high quality service to the passengers with the cost as low as possible. The bimodal tram is under development to achieve such goals in public transportation. The passenger capacity is approximately expected to be 10,000$\sim$17,000 persons/hour and the construction cost to be 10$\sim$30 million dollars/km. It is possible to construct the infrastructure gradually depending on the demand of transportation in the planned route, which can effectively reduce the initial cost to launch the service. The bimodal tram is developed to provide the advantages of subway and bus to the passengers with respect to the scheduled operation and flexibility of the lines.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.424-432
• /
• 2009

This paper discusses about the implementation of a simulator for the Navigation Control System(NCS) of bimodal tram. To operate a NCS of bimodal tram, values of all sorts of sensors installed in bimodal tram should be transmitted to the NCS, and the NCS calculates the measured sensor values to determine traveling direction, traveling speed, current position etc. The implementation of the simulator consists of a device applying driver's input transaction function & virtual sensor program and a sub-rack device that controls communication with the NCS to evaluate navigation control function. The virtual sensor program can create routes (map), traveling profiles & seat information et cetera in order to transmit to the NCS, analyzes driver's input values and NCS output values to create virtual sensor values. The sub-rack device takes charge of communication with the NCS using CAN-OPEN, CAN-J1939, MVP protocols. This paper discusses about the implementation of the simulator and afterwards analyzes and evaluates the NCS simulation results.

• Advances in materials Research
• /
• v.1 no.1
• /
• pp.13-29
• /
• 2012

In order to simultaneously enhance the strength and plasticity in nanostructured / ultrafine-grained alloys, a strategy of introducing multiple length scales into microstructure (or called bimodal composite microstructure) has been developed recently. This paper presents a brief overview of the alloy developement and the mechanical behavior of ultrafine-grained Ti-Fe-based alloys with different length-scale phases, i.e., micrometer-sized primary phases (dendrites or eutectic) embedded in an ultrafine-grained eutectic matrix. These ultrafine-grained titanium bimodal composites could be directly obtained through a simple single-step solidification process. The as-prepared composites exhibit superior mechanical properties, including high strength of 2000-2700 MPa, large plasticity up to 15-20% and high specific strength. Plastic deformation of the ultrafine-grained titanium bimodal composites occurs through a combination of dislocation-based slip in the nano-/ultrafine scale matrix and constraint multiple shear banding around the micrometer-sized primary phase. The microstructural charactersitcs associated to the mechanical behaivor have been detailed discussed.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.183-183
• /
• 2007

Bimodal Tram is a new public transportation system combined subway with bus and consists of variable electric equipment to accomplish the comfortness, reliability, safety and so on. One of them is VCU(Vehicle Control Unit) for Performing driver's cmmand and monitoring the state of other equipment. To lessen the wiring and the interference of outer electromagnetic noises is very important things for bimodal tram with complicated configuration of electric equipments. This paper has investigated the application of CAN(Controller Area Network) communication method for VCU which has display, central unit and several nodes that are connected with other electric equipments(HVAC, door controller etc). We designed and manufactured the prototype of VCU which eventually will be installed on bimodal tram being developed in KRRI at present.