• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1319-1326
• /
• 2012

본 논문은 구동력이 자전거의 self-stability 에 미치는 영향을 해석한다. 운전자의 제어를 고려하지 않는 자전거의 self-stability 는 자전거의 선형 모델로부터 고유치를 구하여 해석 할 수 있다. 전륜과 후륜에 작용하는 자전거 구동력을 고려한 선형모델을 개발하고 이로부터 구동력이 안정성에 미치는 영향을 규명하였다. 선형모델의 결과가 다물체 동역학 모델의 시뮬레이션을 통한 비선형 자전거 모델에서도 같은 결과를 보임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.604-609
• /
• 2002

In development of an advanced bicycle simulator, the investigation of the interactions between bicycle and rider during cycling is paramount important because bicycle is a two-wheeled human-powered vehicle. Tn this work, the tilt stability. among various interactions, of bicycling is investigated experimentally, In the experiments, the tilt angles of the bicycle, riders body and head are measured, as the riding p;1th and the speed are varied. Subjects are asked to ride along four typical paths on rigid flat ground : the straight, C-curved, S-curved and circle paths. The results from extensive experiments with different subjects can be summarized as : 1) The tilt angles of bicycle and rider are almost out of phase during pedaling along the straight path. 2) The bicycle tilt angle is nearly proportional to the square of bicycle speed for the straight and curved paths, and to the curvature for the curved paths. The head tilt angle is the biggest and the body tilt angle is the smallest for the straight path, but the tendency is reversed for the C-curved path. During the curve maneuvering, the rider's head tends to tilt by less than 40% of the bicycle tilt angle.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.93-100
• /
• 2013

This paper presents the development process for a bicycle monocoque frame using bolt fastening. Traditionally, bicycle frames have been constructed with metal tubes joined at their ends by welding. These frames have been brazed or soldered onto metal lugs, forming the frame. Because stress loads become greatest at the joint of the bicycle tube frame, joint construction strongly influences frame design and construction. To avoid the inherent problems of material discontinuity at frame joints, numerous designers have attempted to reduce or eliminate the number of joints in tube frames. Nevertheless, the manufacture of high quality, reliable, one-piece and jointless frames has proven difficult and expensive. In this study, a new monocoque frame adapted to a hybrid bike is proposed. The advantage of the monocoque frame, is theat is has a rechargeable battery system that is built into the frame; as a result, the emotional quality for the customer is improved. In order to estimate the design compatibility compared with that of tube frames, structural analysis is performed using finite element method. A prototype based on a modified design has also been made and stability testing has been carried out.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.267-278
• /
• 2000

Vehicle dynamic models in handing and stability analysis are divided into three groups: bicycle model, roll axis model and full vehicle model. Bicycle model is a simple linear model, which hag two wheels with load transfer being ignored. Roll axis model treats left and right wheels independently. In this model, load transfer has a great effect on nonlinearity of tire model. Effects of suspension system can be analyzed by using full vehicle model, which is included suspension stroke motions. In this paper, these models are validated and compared through comparison with road test, and the effects of suspension kinematics and compliance characteristics on vehicle motion are analyzed. In handling and stability analysis, roll axis model can simulate the real vehicle motion more accurately than full vehicle model. Compliance steer has a significant effect, but the effect of suspension kinematics is negligible.

• 대한교통학회지
• /
• 제30권3호
• /
• pp.43-55
• /
• 2012

자전거는 비동력 무탄소 교통수단으로써 지속가능한 녹색교통수단으로 각광받고 있으며 자전거이용활성화를 위해서는 빠르고 쾌적하며, 안전한 자전거 주행환경을 제공하여 자전거가 가지고 있는 제약을 극복하여 보다 중요한 교통수단으로서의 기능을 할 수 있도록 해야한다. 따라서 본 연구에서는 자전거 모니터링의 일환으로 주행환경 평가시나리오 및 관성센서 및 자전거 속도계가 장착된 프로브자전거를 활용한 자전거 주행환경 평가기법을 제시하였다. 또한 제시된 평가기법은 신뢰성 분석기법인 FTA(Fault Tree Analysis)이론을 적용하여 자전거 주행안전성(CSI)과 주행이동성(속도)을 동시에 평가할 수 있는 통합평가지표를 제시함으로써 실효성이 높을 것으로 판단된다. 본 연구의 결과는 GPS와 관성센서가 통합된 자전거 전용단말기를 개발하여 공공자전거 시스템의 구성요소로 발전시킨다면 보다 지능적인 자전거 교통 모니터링이 가능할 것으로 기대된다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.446-449
• /
• 2004

In the former researches〔2〕〔5〕 for the unmanned bicycle system, we do only focus on stabilizing it by using the lateral motion of mass which plays important role in driving a bicycle system. In this papers, we suggest an algorithm for deriving steering angle and speed for a given desired tracking path. As you may see in this paper, load mass balance system plays important role in stabilization and it is also discussed. We propose a control algorithm for the autonomous self stabilization of unmanned bicycle by using nonlinear compensation-like control based on the Lyapunov stability theory We then propose a tracking control strategy by moving the center of load mass left and right respectively. From the computer simulation results, we can show the effectiveness of the proposed control strategy.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.147-156
• /
• 2016

본 연구에서는 자전거의 경량화를 위해 탄소섬유 복합재료, 유리섬유 복합재료, 케블라섬유 복합재료를 자전거 프레임의 재료로 사용하여 강도 설계 및 최적화를 수행하고 재료 성능을 비교하였다. 이를 위해 유럽표준위원회가 제시하는 자전거 안전사항을 기준으로 복합재료가 가진 이방적 특성을 활용하여 적층각 최적화와 두께 최적화를 수행하였다. 또한, 최적화된 무게, 복합재료의 강도와 비용을 바탕으로 Digital logic 방법으로 재료별 자전거 프레임의 성능을 비교하였으며 이를 통해 섬유강화복합재료를 사용한 자전거 프레임의 구조적 안정성을 확보하며 동시에 경량화를 수행할 수 있었고, 자전거 프레임에 적합한 복합재료를 선별할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.95-99
• /
• 2001

In this paper, a drive system for multi-phase bipolar brushless DC (MPB BLDC) motor is presented. This drive system is used for an electric bicycle. In general, the maximum and minimum speed of electric bicycle are required by law. At first, the proposed controller is satisfied for the limited speed control. Secondly, the system has a technique of exited with modulation(EWM), bidirection control, and partial square wave control. Thirdly, the controller is designed for system stability Experimental results show the performance of the proposed controller of MPB BLDC motors for an electric bicycle.

• 전기학회논문지P
• /
• 제50권3호
• /
• pp.117-124
• /
• 2001

The aim of this paper is to develop a controller of multi-phase bipolar brushless DC (MPB BLDC) motors for an electric bicycle. A MPB BLDC motor has a Permanent magnet rotor in which the magnetic arrangement is radial to the shaft and integral to the rotor laminations. This technique concentrates flux, giving a higher flux density than a surface-mounted PM motor and increases reluctance torque. The stator of MPB BLBC motor has parallel winding, allowing multi-phase separate independent controllability. It gets much more high power than wye-connection at same low voltage. The conventional techniques of exited with modulation(EWM), bidirection control, and partial square wale control are Proposed with one H-bridge and two photo sensors per phase. The Proposed controller is satisfied for the limited speed control and designed for system stability Experimental results show the performance of the proposed controller of MPB BLDC motors for an electric bicycle.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.292-304
• /
• 2005

In this paper we present the linearized equations of motion for a bicycle as a benchmark. The results obtained by pencil-and-paper and two programs are compared. The bicycle model we consider here consists of four rigid bodies, viz. a rear frame, a front frame being the front fork and handlebar assembly, a rear wheel and a front wheel, which are connected by revolute joints. The contact between the knife-edge wheels and the flat level surface is modelled by holonomic constraints in the normal direction and by non-holonomic constraints in the longitudinal and lateral direction. The rider is rigidly attached to the rear frame with hands free from the handlebar. This system has three degrees of freedom, the roll, the steer, and the forward speed. For the benchmark we consider the linearized equations for small perturbations of the upright steady forward motion. The entries of the matrices of these equations form the basis for comparison. Three diffrent kinds of methods to obtain the results are compared : pencil-and-paper, the numeric multibody dynamics program SPACAR, and the symbolic software system Auto Sim. Because the results of the three methods are the same within the machine round-off error, we assume that the results are correct and can be used as a bicycle dynamics benchmark.