• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.441-447
• /
• 1996

This study was carried out in order to find out the pattern of the root resorption following maxillary incisor retraction after maxillary 1st bicuspid extration in maxillary protrusion patients. For this study, thirty two patient who received orthodontic treatment were chosen. The results were as follows; 1. Of the total 192 teeth, 61 teeth(31.77%) showed no apical root loss, 64 teeth(33.33%) fell into the class "slight", 46 teeth(23.96%) fell into the class "moderate". Only 21 teeth(10.94%) were classified as "excessive". 2. No correlation was noted between the amount of apical root loss and the types of tooth movement of the maxillary central incisors. 3. The patients who were treated with standard brackets had more changes in tooth axis and less movement of root apexes, but the patients with straight brackets had less changes in tooth axis and more movement of root apexes. 4. Comparing the degree of root resorption between bracket types, patients who had used standard brackets showed more apical root loss than patients who had used straight brackets. 5. The most frequent degree of root resorption observed in standard bracket patients was second degree, followed by first degree and third degree. The most frequent degree of root resorption observed in straight bracket patients was zero degree, followed by first, second degree and third degree.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.122-128
• /
• 2010

Purpose: Many descriptions of the digital arterial anatomy including skin territory of the finger have been published. Relatively few studies on venous architecture of the finger have been performed in this area, in part, attributable to the technical difficulties encountered in dissecting small vessels. The purpose of this study is to present the precise microsurgical anatomy of the vein related to the digital artery and venae comitantes of the components. Methods: Arterial and venous anatomy of their relation to the fingers were examined in 38 specimens of two fresh cadavers and 36 clinical cases. All specimens were evaluated grossly, surgical microscopically, or / and light microscopically to observe the three & two-dimensional structure of the artery and joining vein, evidence of the venae comitantes, and venous valve. Results: No longitudinal venae comitantes along the digital artery were found in any specimens. The size of the venae comitantes of each digital artery was much smaller than other vein, but always existed any level of digital artery. One or two venae comitantes in the digital artery ran spiral, oblique, helical, fibrillar, or irregular branched shape. The authors also found the vein of the finger, that had bicuspid valves, but not in venae comitantes. Conclusion: Recently, venous outflow problem rather than arterial circulation is the most common cause tissue failure after microvascular surgery in the hand. Sometimes, if it is not recognized early, there is an increased risk of tissue damage and loss. The authors concluded that this study presents a useful knowledge for the characterization of the venous structure and evidence for venae comitantes like a venule in the digital artery at varying levels of the finger.

• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1031-1036
• /
• 1998

Background: Medtronic-Hall mechanical valve is a world widely using prosthesis. But, in Korea, the clinical result from Medtronic-Hall valve replacement is not frequenthy available. Materials and methods: From March 1986 to May 1990, 50 patients underwent valve replacement surgery with Medtronic-Hall valve at Pusan National University Hospital. Seventeen were male and thirty three were female and ra nging in age from 16 to 70 years of age(mean=35 years). Results: The causes of valvular lesion were rheumatic in 43 patients, bicuspid aortic valve in 3 patients, degenerative lesion in three patients and bacterial endocarditis in one patient. The operative procedures were mitral valve replacement(MVR) in 38, aortic valve replacement(AVR) in 5 and double valve replacement(DVR) in 7. The most commonly used valve size was 21mm in AVR, 29mm in MVR. Concomitant surgical procedures were performed in 15 patients; left atrial thrombectomy in 9, left atrial auricle obliteration in 6 and tricuspid annuloplasty in 5(Kay: 2, DeVega: 3). New York Heart Association functional class was mostly Class Ⅲ or Ⅳ(91.5%) preoperatively and ClassⅠor Ⅱ(87.2%) after operation. The findings of postoperative echocardiogram of LAD, LVESD, LVEDD were reduced compared with preoperative period and ejection fraction was increased compared with preoperative period. Postoperative complications were massive bleeding in three, low cardiac output syndrome in two, thromboembolism in one and fulminant hepatitis in one patient. There were three hospital deaths and their causes were low cardiac output syndrome in two and rupture of left ventricle in one patient. The 5 year survival rate was 93.65±0.71% and 10 year actuarial survival rate was 88.27±6.42%. Conclusions: Medtronic-Hall mechanical valve has low valve related complication rate. It's durability and hemodynamic performance is comparable to other mechanical valves.

• Journal of Chest Surgery
• /
• v.30 no.3
• /
• pp.270-274
• /
• 1997

In recent years, the use of allograft conduits in repair of congenital cardiac disease is widely accepted. However, the supply of homograft. is currently limiting their increased clinical application, especially small cryopreserved homografts for use in neonates and inf'ants. We used a technique to surgically reduce the size of the more readily available large-diameter allografts, making them suitable for right ventricular outflow tract reconstruction in small infants and children. From December 1994 to March 1996, a total of 11 patients ranging in age from 10 months to 6 years (mean age, 27.3 months) and ranging in weight from 5.6 to 18.5 kg (mean 11.5 kg) underwent reconstruction of the right ventricular outflow tract using this surgical technique (pulmo ary atresia with ventricular septal defect, 9 cases ; tetralogy of Falloff, 2 cases). The diameter after downsizing ranged from 14 to 19 mm with a mean of 16.8 mm. There was one operative death due to rupture of the infected homograft. Evaluation of these patients between 2 and 15 months (mean 6.9 months) after homograft implantation reveals excellent clinical and echocardiographic results. There were no significant homograft insufficiency and RVOT obstructions. Although a longer follow-up is certainly required to evaluate the long term fate of the surgically modified bicuspid homografts, we believe that this technique may represent a valuable therapeutic alternative, at least in the short term, to the use of synthetic grafts when an appropriately sized homograft is not available.

• Journal of Veterinary Clinics
• /
• v.31 no.4
• /
• pp.303-306
• /
• 2014

Three Yorkshire Terriers (12-year-old, 13-year-old, and 15-year-old castrated males) with respiratory distress, coughing and anorexia were the subjects of this report. In laboratory examinations, there were no remarkable findings. However, the thoracic radiographic findings included a large mass of soft tissue density in the cardiac base region, tracheal elevation, and aortic bulging in all three Yorkshire Terriers. There were no remarkable findings in the abdominal radiographs. In echocardiography, a homogeneous hyperechoic mass around the aorta and bicuspid valve regurgitation were found in all three dogs. There were no remarkable findings in abdominal ultrasonography. Computed tomographic findings showed a large well -defined heterogeneous mass in the cranial vena cava, which was dominant in the left side in all three Yorkshire Terriers. The mass sizes were about $3{\times}4cm$. In post-contrast scanning, contrast enhancement was evident. These cases were diagnosed as heart-base tumor. Treatments provided to the three dogs were based on symptomatic medical management of cardiac failure and tracheal collapse. Case 1 (12-year-old) survived for 3 months, case 2 (13-year-old) for 5 months, and case 3 (15-year-old) for 32 months after the diagnosis. Our results show that the clinical findings, thoracic radiography, echocardiography, computed tomography (CT) and symptomatic medical management in dogs suspected to have heart base tumor.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.399-409
• /
• 1999

The purpose of this study was to evaluate the change of soft tissue profile on lower face following retraction of incisors through orthodontic treatment. 31 Korean women with bialveolar protrusion who were treated with 4 first bicuspid extraction were selected. All of samples were treated from above 17 years of age. Lateral cephalometric head films taken before and after treatment were analyzed statistically. The results were obtained as follows. $\cdot$The ratio of upper incisor retraction to upper lip retraction and lower incisor retraction to lower lip retraction were 1.54:1 (r=0.746) and 0.92:1 (r=0.584) respectively $\cdot$It appeared during orthodontic treatment that UIS-LS was increased considerably and the others in soft tissue thickness measurements were slightly decresed. $\cdot$Analysis of correlation showed that the change of the upper lip (LS) with the change of maxillary central incisor (UIS) and the change of lower lip with the change of B point were most strongly correlated. $\cdot$The multiple regression equations were obtained to predict soft tissue profile change of lower face according to retraction of incisors.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.459-474
• /
• 2005

Making a precise and ideal set-up model is an essential part in the indirect bonding procedure for lingual orthodontic treatment. To evaluate the accuracy of the making a set-up model, 22 adult patients who received lingual orthodontic treatment with 4 bicuspid extractions were selected, and 3 sets of dental models (before, set-up, and after treatment) were measured using the set-up model gauge, an instrument for measuring the inclination and angulation of the clinical crowns on the dental model. Two sets of lateral cephalograms (before and after) from each patient were also evaluated. The mean difference between the before treatment model and the set-up model was $-3.93{\pm}6.98^{\circ}$ for the inclination and $1.87{\pm}5.79^{\circ}$ for the angulation. And the mean difference between the set-up model and the after treatment model was $-4.31{\pm}5.91^{\circ}$ labiolingually and $-2.16{\pm}3.27^{\circ}$ mesiodistally, The after treatment model differed from the before treatment model about $-8.24{\pm}5.39^{\circ}$ in inclination. There were no significant difference between the measured gauge that measured from the dental model using the set-up model gauge and the calculated gauge angle measured from the lateral cephalogram using constructed points and lines. Using the set-up model gauge, it is possible to evaluate the study model 3-dimensionally in relation with the patient's lateral cephalogram and establish whether the doctor's prescription or overcorrection is built in the set-up model precisely.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.247-261
• /
• 1995

The purpose of this study was to quantitate differences in the nature of the correction of Angle's Class II div 1 malocclusion dependent on the patient's age at the time of treatment. The sample consisted of 27 female patients in the adolescent group with a mean initial records age of 11.8 years and 25 female patients in the adult group with a mean starting age of 21.1 yrs. Lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. The results were obtained as follows. 1. None of maxillary skeletal parameters exhibited a significantly different in treatment change between adolescents and adults. But, in mandibular skeletal measurements, there were significant differences between two groups. (P<0.05) 2. Measures of vertical dimension in the adults remained unchanged during treatment, reflecting the effective absence of growth. 3. The steepness of occlusal plane in the adults changed significantly.(P<0.05) In contrast, the adolescents displayed stability of the occlusal plane. 4. According to the Johnston analysis, there was a significant difference in the total molar correction between two groups.(P<0.05) 5. According to the Johnston analysis, differential mandibular growth in the adolescents contrubuted $63\%$ of the total molar correction, with orthodontic tooth movement accounting for the remaining $37\%$. In the adults, dental movement comprised $99\%$ of the correction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

The purpose of this study was to compare the polymerization shrinkage of several filling methods using strain gauges. In this study, a light-emitting diode(LED) curing unit(Elipar Freeligh2, 3M EPSE, USA) and plasma arc lamp(PAL) curing unit(Flipo, LOKKI, France) were used for curing, Filtek $Z350^{TM}$(3M EPSE, USA) composite resin was used for the cavity filling. Sixty permanent bicuspid teeth, that were extracted for orthodontic treatment, were studied. The cavities were prepared on the occlusal surface and were filled using the following methods : 1) bulk filling, 2) parallel filling, 3) oblique filling The strain was recorded on the buccal, lingual, mesial and distal surfaces and the strain values were computed into stress values. The shear bond strength of each filling method was tested using a Micro Universal Testing machine. The results can be summarized as follows: 1. In the strain changes, all LED and PAL curing groups showed an increase on the buccal surface and a slow decrease as time elapsed. 2. In the strain changes of the mesial and distal surfaces, the decreases and increases were shown repeatedly and reduced as time elapsed. 3. There were no significant statistical strain changes among filling methods in the LED or PAL curing groups. 4. There were significant statistical strain changes between the LED and PAL curing groups on the buccal surface(p<0.05). 5. From the shear bond strength results, in the LED curing group, filling method 3 showed lower surface stress than filling method 1 and 2(p<0.05). In the PAL curing group, there were no significant statistical strain changes between each filling method. 6. The surface stress of each group was lower than the shear bond strength.

• Journal of Periodontal and Implant Science
• /
• v.42 no.5
• /
• pp.173-178
• /
• 2012

Purpose: The main purpose of this study was to investigate bone thickness on the buccal and palatal aspects of the maxillary canine and premolars using cone-beam computed tomography (CBCT). The differences between left- and right-side measurements and between males and females were also analyzed. Methods: The sample consisted of 20 subjects (9 males and 11 females; mean age, $21.9{\pm}3.0$) selected from the normal occlusion sample data in the Department of Orthodontics, The Catholic University of Korea. The thickness of the buccal and palatal bone walls, perpendicular to the long axis of the root were evaluated at 3 mm and 5 mm apical to cemento-enamel junction (CEJ) and at root apex. Results: At the canines and first premolars regions, mean buccal bone thickness of at 3 mm and 5 mm apical to CEJ were less than 2 mm. In contrast, at the second premolar region, mean buccal bone thickness at 3 mm and 5 mm apical from CEJ were greater than 2 mm. Frequency of thick bone wall (${\geq}2mm$) increased from the canine to the second premolar. Conclusions: This result should be considered before tooth extraction and planning of rehabilitation in the canine and premolar area of maxilla. Careful preoperative analysis with CBCT may be beneficial to assess local risk factors and to achieve high predictability of success in implant therapy.