• YAKHAK HOEJI
• /
• v.7 no.1
• /
• pp.26-29
• /
• 1963

Three systems such as CaS, BaS and ZnS are used as ground materials and transition elements such as Bi, Cu, Ag and Ni are used as activators to preared phosphorescent materials of strong after-grow intensity. These three systems in which we have 31 kinds of different composition samples are heated at given temperatures in the electrical furnace and are cooled in the air in order to crystallize them. In the case of BaS system, the mixture of CaO and purified S is better than the other kinds of calcium compound as the ground materials to crystallize phosphors. In BaS system, the mixture of BaCO$_{3}$ and purified S, in ZnS system ZnS respectively is the most proper ground material to prepare such a strong after-grow intensified phosphors. In a given range, the higher in temperature and the longer time of heating, the better phosphors we obtain.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.232-235
• /
• 2008

In this study, in order to develop the composition ceramics for multilayer piezoelectric actuator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$, $Na_2CO_3$, ZnO as sintering aids and their piezoelectric and dielectric properties were investigated according to the Bi substitution, Bi substitution induced grain growth and increase of sinterablity, And also, Bi substitution suppress secondary phase due to the liquid phase sintering effect. Bi substitution enhanced electromechanical coupling factor ($k_p$) and dielectric constant ($\varepsilon_r$), However, mechanical quality factor($Q_m$) was deteriorated, At the sintering temperature of 870 $^{\circ}C$ and Bi substitution of 1 mol%, density, electromechanical coupling factor ($k_p$), mechanical quality factor ($Q_m$), Dielectric constant ($\varepsilon_r$) and piezoelectric constant ($d_{33}$) of specimen showed the optimum values of 7,878 $g/cm^3$, 0,608, 835, 1603 and 397 pC/N, respectively for multilayer piezoelectric actuator application.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.199-206
• /
• 2013

The Daehyun gold-silver deposit consists of two hydrothermal quartz veins that fill NE-trending fractures in the Cambro-Ordovician calcitic marble. I have sampled wallrock, hydrothermaly-altered rock and gold-silver ore vein to study the element dispersion and element gain/loss during wallrock alteration. The hydrothermal alteration doesn't remarkably recognized at this deposit and consists of mainly calcite, dolomite, quartz and minor epidote. The ore minerals composed of arsenopyrite, pyrrhotite, pyrite, sphalerite, stannite, chalcopyrite, galena, electrum, native bismuth and silver-bearing mineral. Based on analyzed data, the chemical composition of wallrock consists of mainly $SiO_2$, CaO, $CO_2$ with amounts of $Al_2O_3$, $Fe_2O_3(T)$ and MgO. The contents of $SiO_2$, $Fe_2O_3(T)$, MgO, CaO and $CO_2$ vary significantly with distance from ore vein. The element dispersion doesn't remarkably recognized during wallrock alteration and only occurs near the ore vein margin because of physical and chemical properties of wallrock. Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, total S, Ag, As, Bi, Cd, Cu, Ni, Pb, Sb, Sn, W and Zn. Remarkable loss elements are $SiO_2$, MnO, MgO, CaO. $CO_2$ and Sr. Therefore, Our result may be used when geochemical exploration carry out at deposits hosted calcitic marble in the Hwanggangri metallogenic district.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.324-332
• /
• 1983

In this studies resistivity thermal expansion and microstructure of the Forsterite Porcelain as a high frequency insulator were investigated. The body containing Zn-glass shows higher resistivity than any other body. The bodies containing K, Ba, Cd-glass respectively consist of fine crystals of mosaic type. The bodies containing Bi, Zn, Zr-glass repectively included more large crystals because of the grain growth and coherence of fine particles In the 4 series Forsterite containing excess MgO 0-6% the thermal coefficients of the bodies increased with the increasing of excess MgO and the bodies have conspicuously high thermal expansion coefficients when 15% excess $BaCO_3$ was added to. The resistivities of additive bodies of $BaCO_3$ 0, 5, 10% in Forsterite containg excess MgO 2% are higher than any other that of composition. Bacause the growing of Forsterite crystals was restrained with the increasing of excess MgO $BaCO_3$ their grain size became fine and their grain boundaries were decomposed and also the glass phase having high refractive inder was increased. The higher the firing temperature increased the more the process of crystal growing was progressed.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.381-383
• /
• 2021

Light-activated metal oxide gas sensors have been investigated in recent decades. Light illumination enhances the sensing attributes, including the operational temperature, sensitivity, and selectivity. Unfortunately, high operating temperature is a major problem for gas sensors because of the huge energy consumption. Therefore, the importance of light-activated room-temperature sensing has increased. This paper reviews recent light-activated sensors and their sensing mechanisms with a specific focus on metal oxide gas sensors. Studies use the outstanding ZnO and SnO₂ sensors to research photoactivation when illuminated by various sources such as ultraviolet (UV), halogen lamp, or monochromatic light. Photon induction generates electron-hole pairs that increase the number of adsorption sites of gas molecules and ions improving the sensor's sensing properties.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.312-316
• /
• 2014

The joining behavior of forsterite ceramics to SUS304 alloy using $8PbO-78Bi_2O_3-8B_2O_3-4ZnO-2SiO_2$ (wt%) system glass frit was investigated. The contact angle was smaller than $90^{\circ}$ at a temperature of $460^{\circ}C$. Redox reaction at the interface between forsterite and SUS304 was found to appear when the electrons in the metal part moved toward the glass part and the oxygen ions in glass moved to the metal side. The decrease of the surface tension due to the PbO solubility on the forsterite side contributed to the better wetting behavior at low temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.36-36
• /
• 2007

$R_2O_3$(R=Bi, B)-RO(R=Ba, Zn)를 주성분으로 하는 Pb-free유리프리트에 높은 굴절률을 가지고 있는 $TiO_2$ filler를 첨가하여 PDP용 백색유전체를 제조하였다. $TiO_2$ type, 함량에 따른 백색유전체로의 반사율 및 유전 특성을 조사하였다. 백색유전체를 소성한 결과 rutile과 anatase를 중량비로 75:25로 혼합하여 $520^{\circ}C$에서 소성한 경우 밀도 및 수축율의 변화를 거의 나타나지 않았다. 그러나 $TiO_2$함량이 15wt.%를 혼합하여 첨가했을 경우 반사율은 높고 접합특성 또한 우수하였다. 또한, 유전상수는 $TiO_2$첨가량이 증가함에 따라 증가하는 경향을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.680-687
• /
• 2006

An overview is given to optimize the solid state processes toward phase pure and well-crystallized fine particulates of mixed oxides, serving as electroceramic materials in various genres. Elevation of the reactivity and preservation of stoichiometry of the starting mixture are of universal importance. Mechanical activation is versatile for these purposes, particularly when an oxygen atom as a hinge promotes formation of hetero-bridging bonds between dissimilar cationic species prior to calcination. Case studies carried out recently in the author's laboratory are displayed and compared for ferroelectric materials, i.e. $PbMg_{1/3}Nb_{2/3}O_3$ $xPbTiO_3$(PMN-PT), $(1-y)Pb(Zn_xMg{1-x})_{1/3}$ $yNb_{2/3}O_3$ (PZN-PMN), $BaBi_2Ta_2O_9$ (BBT), $Ba(Mg_{1/3}Ta_{2/3})O_3$ (BMT), and ferromagnetics, i.e. M-, Y-, and Z-phases of Ba-hexaferrites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.174-174
• /
• 2009

현재 전자부품용으로 사용되는 유리프리트의 경우 PbO계를 주로 사용하고 있다. 최근 환경규제에 따른 PbO 사용이 제한됨에 따라 이를 대체할 Pb-free 유리 조성에 대한 연구가 활발히 진행 중이다. Pb-free계로서는 $Bi_2O_3$계, $B_2O_3$계가 주로 연구되고 있으나 소성 온도가 $500^{\circ}C$이상으로 높고 또한 $Bi_2O_3$ 계는 중금속이기 때문에 문제가 있다. 본 연구에서는 $400^{\circ}C$ 미만 소성이 가능한 SnO-$P_2O_5$계를 기본 조성계로 선택하고 열적, 전기적, 화학적 특성을 개선하기 위해 $R_2O_3$(R=Al, B), RO(R=Mg, Zn, Ca, Ba) 를 첨가하였다. 개선된 조성으로 샘플을 만들고 이를 대상으로 실제 전자부품 생산 공정에 적용 실험을 진행 하였다. 실험에 사용된 전자 부품은 소형 칩 베리스터로 생산 공정에서 코팅용 유리프리트와 파우더를 절연체로서 전면에 코팅하게 된다. 유리프리트를 코팅함으로서 누설 전류를 차단하고 생산 공정시 베리스터 내부를 보호하게 된다. 실험에 사용된 샘플의 열적 특성은 TMA로, 전기적 절연 특성은 고 절연저항 측정기로 측정하였고 내 산성과 내 알칼리성도 측정하였다. 샘플을 이용하여 완성된 칩 베리스터의 성능은 고온, 내습 신뢰성 TEST(고온:$150^{\circ}C$ 12HR, 내습:$85^{\circ}C$-85%12HR)로 실험하여 합부판정 (Leakage current <10uA)을 내려 완성품과 불량품을 가려내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.206-207
• /
• 2005

Display 소재로서 유전체나 격벽재 실링재로 사용되고 있는 frit는 PbO를 주성분으로 갖는 유리가 사용되고 있다. PbO 성분이 함유된(50$\sim$85%) 구성소재는 최근 RoHS 나 WEEE 등의 환경규제 실행에 직면해 있으며, 대체재료의 개발을 위한 많은 연구가 진행되고 있다 PbO 성분을 대체할 성분으로는 $Bi_2O_3$ 계, BaO-ZnO 계, $P_2O_5$ 계 등의 성분이 주요성분으로 이루어져 있으며, PbO 성분을 함유한 유리의 저융점, 저유전율, 고 투과율, 내산성, 내전압, 팽창계수 matching 등의 특성들에 부합되는 재료를 개발하기 위해 많은 노력을 기울이고 있다. 본 연구에서는 SnO-$P_2O_5$ 계 유리 조성을 선택하여 $R_2O_3$의 치환 및 용융분위기의 조절에 따른 저융점 유리로서의 특성과 효과에 대하여 고찰하였다.