• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.91-94
• /
• 2001

By varying fabricating process, precursor powders with different initial conditions were prepared. Subsequently, Bi-2223/Ag tapes were made through these powders. The effects of precursor powders on the phase evolution and Jr properties of Bi-2223/Ag tapes were studied along with several thermomechanical cycles. Our results showed that the initial conditions of precursor powders could strongly influence the phase formation rate and $J_{c}$ value in final tapes. The factors of precursor powders that influence the phase formation and $J_{c}$ of Bi-2223/Ag tapes must be studied and optimized in combination.ion.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.129-136
• /
• 2006

In order to get basic information on the reference electrode material for the long life Al concentration sensor in zinc galvanizing melt, the workability and stability of fluorine potential cell with $CaF_2$ single crystal electrolyte were examined carefully at constant temperature for six kinds of reference materials (Zn, Sn, Cd, Bi, Pb, Al-Sn alloy + fluorides). Good workability and stability of the sensor were found in sensor with $Bi+BiF_3$ reference electrode. The Al sensor with $Bi+BiF_3$ reference electrode was assembled and was tested in Zn-Al melt with different Al concentration. The EMF was changed rapidly with the change of Al concentration and was stabilized in a short time. Thus the response of EMF was satisfactory for $CaF_2$ sensor. The correlationship between EMF from the sensor and logarithm of Al concentration has been derived from the least square regression method. E/mV=57.515log[wt% Al]+1883.3 R=0.9717 ($0.013{\leq}[wt% Al]{\leq}0.984$) The EMF from Al sensor was increased linearly against logarithm of [wt% Al]. The fluorine potential of Zn-Al melt was also calculated to be in the range of $10^{-60}{\sim}10^{-61}$ Pa for the present experiemental condition.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.104.1-104.1
• /
• 2018

열전소자는 열전현상을 이용한 재료로서 여기서 열전현상이란 열을 전기로 또는 전기를 열로 바꿀 수 있는 에너지 변환 현상을 의미한다. 그 중 Bi-Te계 열전소자는 $200^{\circ}C$이하의 온도에서 열전 효율이 우수하기 때문에 항공, 컴퓨터 등의 열전발전 또는 열전냉각 모듈에 널리 사용된다. 열전 모듈 제작시 Bi-Te 소자는 구리 기판에 접합하여 사용하게 되는데 이 때 솔더의 성분인 Sn과 기판의 Cu는 소자내로 확산하여 금속간 화합물을 형성한다. 이렇게 형성된 금속간 화합물은 접합강도를 저하시키는 원인뿐만 아니라 열전 성능을 저하시키는 원인이 된다. 본 연구에서는 이러한 접합강도와 열전성능의 저하를 막기 위해 BiTe 소자의 표면에 $4{\mu}m$두께의 Ni-P 도금 공정을 추가하여 Ni-P 도금층이 Cu와 Sn의 확산을 막는 방지층 역할을 하게 한다. 그리고 도금한 소자를 $3mm{\times}3mm{\times}3mm$로 커팅하여 구리 기판에 접합하여 열전 모듈을 제작하였다. 제작된 열전모듈의 단면을 EPMA분석한 결과 Ni-P 도금층이 확산방지층으로 잘 작용되었음을 확인하였다. 또한 접합강도 측정결과 도금을 하지 않은 Bi-Te소자에 비해 접합강도가 향상되었음을 확인하였다. 따라서 Ni-P도금을 실시함으로서 금속간 화합물 형성을 억제하고 열전모듈의 성능과 접합강도를 향상시킬 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.96-100
• /
• 2001

Bi-2223 tapes have been developed for low-field power applications at liquid nitrogen temperature. When the Bi-2223 tapes are used in an application such as a power transmission cable or a power transformer, they are supplied with an AC transport current and exposed to an external magnetic field generated by neighboring tape's AC currents simultaneously. AC loss taking into account such real applications is a crucial issue for power applications of the Bi-2223 tapes to be feasible. In this paper, the transport losses for different AC current levels and arrangements of the neighboring tapes have been measured in a 1.5 m long Bi-2223 tape. The significant increase of the transport losses due to neighboring tape's AC currents is observed. An increase of the transport losses caused by a decrease of the Bi-2223 tape's critical current is a minor effect. The measured transport losses could not be explained by a dynamic resistance loss based on DC voltage-current characteristics in combination with the neighboring tape's AC currents. The transport losses do not depend on the frequency of the neighboring tape's AC currents but its arrangements in the range of small current especially.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.318-319
• /
• 2008

In this article, magnetic properties of multiferroic bi-layer $BiFeO_3$ (BFO)/$BaTiO_3$ (BTO) thin films were studied. It was found that the magnetization increased by the insertion of BTO buffer layer even though the interfacial stress was slightly relaxed, which indicated a coupling between the ferroelectric and ferromagnetic orders. Furthermore, with slightly increase of BFO film thickness, both BFO and BFO/BTO bi-layer films showed anisotropic magnetic properties with higher in-plane magnetization than the values measured out-of-plane. These are attributable to strain constraint effect at the interface.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.691-692
• /
• 2016

본 논문은 802.11a 무선 랜용 5.25-GHz BiCMOS 저 잡음 증폭기를 제안한다. 이러한 회로는 1볼트 전원에서 동작하며, 저 전압 전원 공급에서도 높은 전압 이득을 가지도록 설계하였다. 제안한 회로는 $0.18{\mu}m$ SiGe HBT BiCMOS로 설계되어 있다. 저 전압 및 저 전력 동작을 위해 바이어스 회로는 밴드 갭 참조 (band-gap reference circuit) 바이어스 회로를 사용하였다. 제안한 회로는 최근 발표된 연구결과에 비해 높은 전압이득, 낮은 잡음지수 및 작은 칩 크기 특성을 보였다.

• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.370-374
• /
• 2008

In this study, we evaluated anti-corrosion properties of both commercial unleaded and lead epoxy primer for automotive substrate before applying to actual painting lines by salt spray test, and cyclic corrosion test, potentiodynamic test and electrochemical impedance spectroscopy. The difference in the corrosion resistance between automotive epoxy primers contained $Bi(OH)_{3}$ and leaded one was investigated. And it was also discussed the effect of zinc phosphate pretreatment to the epoxy primers. The specimen coated epoxy primer contained $Bi(OH)_{3}$ showed 0.5 V higher corrosion potential than that of bare steel. The result of salt spray test did not indicate remarkable difference of corrosion resistance in all specimens above $10{\mu}m$ thickness up to 1200 hours. In the cyclic corrosion test, epoxy primers contained $Bi(OH)_{3}$ on phosphated substrate performed good corrosion properties until 800 hours. The epoxy primer contained $Bi(OH)_{3}$ performed the equivalent corrosion resistance as leaded coating on phosphated steel, but slightly inferior to that of leaded on bare steel. These results show that the pre-treatment of zinc phosphate is effective as well as pigment changing in performing anti-corrosion properties in automotive bodies.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(B)
• /
• pp.107-111
• /
• 2010

급변화하는 비즈니스 환경에 가장 빠르게 대응할 수 있고, IT 자원의 상호운용성 및 재활용성을 증대할 수 있는 SOA 기반 소프트웨어 시장이 급격히 증가함에 따라 SOA 기반 시스템 품질 평가 방법들이 연구되고 있다. 그러나, SOA에 융합된 BI 관점의 평가 방법은 연구가 부족하다. 본 연구에서는 ISO/IEC 9126국제 표준을 참조하여 SOA와 융합된 BI의 품질 평가 특성을 제시하고, 사례 연구를 통해 품질 평가 방법을 제안 및 검증한다. 본 연구를 통해, BI를 SOA와 융합하는 과정에 품질 특성을 고려하여 구현 및 융합함으로써 소프트웨어의 품질 향상을 유도하고 완성된 소프트웨어의 품질 평가에 활용될 것으로 기대한다.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.109-114
• /
• 2010

Bioassay data analysis software (BiDAS-2007) has been developed by KAERI, which adds several new functions to its previous version. New functions of the BiDAS-2007 computer code enable the user not only to do a simultaneous analysis by using two or more types of bioassay for the best internal dose evaluation, but also to do a continual internal dose evaluation from a change of the internal exposure conditions such as an intake type (acute, chronic), an intake pathway (inhalation, ingestion), an absorption type (Type F, M, S), and a particle size (AMAD, activity median aerodynamic diameter), and also to estimate the intakes in various conditions of an internal exposure at a time. The values calculated by the BiDAS-2007 code are consistent and in good agreement with those values by IMIE-2004 code by Berkovski and IMBA code by Birchall. The BiDAS-2007 computer code is very useful and user-friendly to estimate the radionuclide intakes and committed effective doses of a radiation worker.

• 대한화학회지
• /
• 제12권4호
• /
• pp.139-141
• /
• 1968

液狀이온交換體 Amberite LAI을 chloroform에 10%로 묽혀서 鹽酸算性에서 Bi(III), As(III), Sb(III), Zn(II) 및 Fe(III)의 推出率을 試驗한 結果, Zn(II)는 2M에서 98%. As(III)는 7~14M에서 Sb(III)는 2~4M에서 , Fe(III)는 6~10M에서 蒼鉛과 定量的으로 分離되었다. 그리고 chloroform을 溶媒로 썼을 때는 xylene이나 hexane을 溶媒로 썼을때보다 더 急傾斜를 이루는 推出率曲線을 나타냈다. 各各의 不純物을 分離後 Zn(II)는 dithizone. As(III)는 Gutzeit method, Sb(III)는 brilliant green, Fe(III)는 thiocyanate에 依한 比色方法으로 定量하였다.