• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1098-1105
• /
• 2007

Quantum mechanical and molecular dynamics simulation analysis has been performed on the model system for CALB (Candida antarctica lipase B) with esters to study the reaction mechanism and conformational preference of catalytic hydrolysis and the esterification reaction. Using quantum mechanical analysis, the ping-pong bi-bi mechanism was applied and energies and 3-dimensional binding configurations of the whole reaction pathways were calculated. Further molecular dynamics simulation analysis was performed on the basis of the transition state obtained from quantum mechanical study to observe the effect of structures of the substrates. Calculation results using substrates of different chain length and chiral configurations were compared for conformational preference. The calculated results showed very small influence on chain length, whereas chiral conformation showed big differences. Calculated results from molecular modeling studies have been compared qualitatively with the experimental data using racemic mixtures of (${\pm}$)-cis-4-acetamido-cyclopent-2-ene-1-ethyl acetate as substrates.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제16권3호
• /
• pp.89-99
• /
• 2008

Indoor ozone has received attention because of its well-documented adverse effects on health. In addition to the inherently harmful effects of ozone, it can also initiate a series of reactions that generate potentially irritating oxidation products, including free radicals, aldehydes, organic acids and secondary organic aerosols (SOA). Especially, ozone reacts actively with terpene. The overarching goal of this work was to better understand ozone and terpene distributions within rooms. Towards this end, the paper has two parts. The first describes the development of a cylindrical test chamber that can be used to obtain the second order rate constant $(k_b)$ for the bi-molecular chemical reaction of ozone and terpene in the air phase. The second consists of model room experiments coupled with Computational Fluid Dynamics (CFD) analysis of the experimental scenarios to obtain ozone and terpene distributions in various turbulent flow fields. The results of CFD predictions were in reasonable agreement with the experimental measurements.

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 공업화학
• /
• 제18권6호
• /
• pp.643-649
• /
• 2007

부탄올의 구조이성질체(n-, iso-, sec-, tert-butanol) 와 n-부티르산에 대한 리파아제 효소.촉매 에스테르화 반응이 초임계 이산화탄소 조건 하에서 수행되었다. 본 실험은 교반속도 150 rpm, 반응 온도 323.15 K, 반응 압력 150 bar의 조건으로 고압반응기에서 5 h 동안 수행하였다. 실험에 사용된 리파아제는 Candida Antarctica lipase B (CALB)이다. 실험 결과는 HP-INNOWax 컬럼을 이용하여 FID (Flame Ionization detector)가 장착된 기체 크로마토그래피(Gas Chromatography, GC)를 이용하여 분석하였다. 반응 후 생성물의 전환률과 반응의 경향성을 분자동역학 시뮬레이션을 이용하여 예측된 결과와 정성적으로 비교하였다. 경쟁적인 저해반응이 포함된 Ping-Pong Bi-Bi 메커니즘을 기초로 하여, 반응의 각 단계를 적용하여 구조 최적화를 하였고 이를 이용해 전이상태의 에너지를 구하여 반응의 경향성을 예측하였다. 생성되는 에스테르 이성질체의 구조적 선호도는 분자동역학 시뮬레이션을 통하여 분석하였다. 이러한 방법의 개발은 앞으로 컴퓨터를 이용한 효소 반응의 설계에 유용하게 사용될 수 있을 것이다.

• Journal of Microbiology and Biotechnology
• /
• 제29권4호
• /
• pp.577-586
• /
• 2019

The engineered Aspergillus oryzae has a high NADPH demand for xylose utilization and overproduction of target metabolites. Glucose-6-phosphate dehydrogenase (G6PDH, E.C. 1.1.1.49) is one of two key enzymes in the oxidative part of the pentose phosphate pathway, and is also the main enzyme involved in NADPH regeneration. The open reading frame and cDNA of the putative A. oryzae G6PDH (AoG6PDH) were obtained, followed by heterogeneous expression in Escherichia coli and purification as a his6-tagged protein. The purified protein was characterized to be in possession of G6PDH activity with a molecular mass of 118.0 kDa. The enzyme displayed maximal activity at pH 7.5 and the optimal temperature was $50^{\circ}C$. This enzyme also had a half-life of 33.3 min at $40^{\circ}C$. Kinetics assay showed that AoG6PDH was strictly dependent on $NADP^+$ ($K_m=6.3{\mu}M$, $k_{cat}=1000.0s^{-1}$, $k_{cat}/K_m=158.7s^{-1}{\cdot}{\mu}M^{-1}$) as cofactor. The $K_m$ and $k_{cat}/K_m$ values of glucose-6-phosphate were $109.7s^{-1}{\cdot}{\mu}M^{-1}$ and $9.1s^{-1}{\cdot}{\mu}M^{-1}$ respectively. Initial velocity and product inhibition analyses indicated the catalytic reaction followed a two-substrate, steady-state, ordered BiBi mechanism, where $NADP^+$ was the first substrate bound to the enzyme and NADPH was the second product released from the catalytic complex. The established kinetic model could be applied in further regulation of the pentose phosphate pathway and NADPH regeneration of A. oryzae to improve its xylose utilization and yields of valued metabolites.

• 공업화학
• /
• 제24권4호
• /
• pp.402-406
• /
• 2013

본 연구에서는 납사 크래킹 잔사유로부터 용융전기방사용 핏치가 열처리 개질 방법에 의하여 제조되었다. 개질된 핏치의 연화점과 물성은 질소유량, 열처리 온도 및 반응시간 같은 개질 조건에 따라 영향을 받았다. 이중에서 열처리온도가 핏치의 분자량 분포 및 연화점에 큰 영향력을 미쳤다. 열처리 온도가 증가함에 따라서 표면 작용기들의 분해와 고리화 반응으로 C/H 몰비와 평균분자량이 증가하였다. 또한, 벤젠 불용분(BI)과 퀴놀린 불용분(QI)값이 감소되었고, 분자량 분포의 폭이 더 좁아지는 것으로 보여주었다. 연화점이 $155^{\circ}C$인 개질 핏치로부터 용융전기방사법을 이용하여 $4.8{\mu}m$의 직경을 갖는 탄소섬유를 얻을 수 있었다. 용융전기방사법이 저섬경화 섬유를 제조하는데 기존의 용융방사법보다 더 용이할 것으로 여겨진다.

• 대한화학회지
• /
• 제12권1호
• /
• pp.4-11
• /
• 1968

With the selected emulsifiers for the emulsion polymerization of methyl methacrylate, the HLB of the emulsifier in the reaction system has been studied on the effect of the ratio of tetra sodium-N-(1,2-dicarboxy ethyl)-N-octadecyl sulfosuccinamate(Aerosol 22) to polyethylene glycol nonyl phenyl ether (Noigen EA 160), and also sodium lauryl sulfate(Quolac EX-UB), Disodium-N-octadecyl sulfosuccinamate (Aerosol 18) and Aerosol 22 as emulsifiers having various hydrophilic groups in the molecules have been studied. Results are as follows; 1) The viscosity of the emulsions and the molecular weight of the polymers have maximum values at a constant HLB value of emulsifiers, but their stabilities show minimum point at the value with the titration with the three kinds of mono, bi, tri-valent electrolytes. These results are agreed on the theory of Greth & Wilson in which the properties of polymer emulsions depend upon the HLB system of emulsifiers. 2) The viscosity of the emulsions and the molecular weights of the produced polymers increase more in the case of blending of Aerosol 22 to Noigen EA-160 than of the separate using. 3) The coagulation effects of the divalent electrolytes($ex,\;Ca^{++},\;Zn^{++}$) are contrast to the effects of monovalent($ex,\;Na^+$) and trivalent($ex,\;Al^{+++}$) in the emulsions with Aerosol 18 or Aerosol 22 which have more than two hydrophilic groups. It seems that the stability of the O/W emulsions by electrolytes is directly related to the parameters of surface physical chemistry such as surface geometry of surface chemical constitution of polymer particles.