• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.235-236
• /
• 2006

The disk cam mechanism can produce a positive motion with relatively few components. This paper introduce a shape design of cam using the relative velocity method and a precision machining technology for using Bi-arc method. The paper gives a machining information at each point using the Bi-arc method and the analysis method of the cutting error due to the moving path of the cutter, so that we can lead to the optimum design in a disk cam mechanism.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.352-358
• /
• 2008

The present study focused on the synthesis of a bismuth-antimony-tellurium-based thermoelectric nanopowders using plasma arc discharge process. The chemical composition, phase structure, particle size of the synthesized powders under various synthesis conditions were analyzed using XRF, XRD and SEM. The powders as synthesized were sintered by the plasma activated sintering. The thermoelectric properties of sintered body were analyzed by measuring Seebeck coefficient, specific electric resistivity and thermal conductivity. The chemical composition of the synthesized Bi-Sb-Te-based powders approached that of the raw material with an increasing DC current of the are plasma. The synthesized Bi-Sb-Te-based powder consist of a mixed phase structure of the $Bi_{0.5}Sb_{1.5}Te_{3}$, $Bi_{2}Te_{3}$ and $Sb_{2}Te_{3}$ phases. This powder has homogeneous mixing state of two different particles in an average particle size; about 100nm and about 500nm. The figure of merit of the sintered body of the synthesized 18.75 wt.%Bi-24.68 wt.%Sb-56.57 wt.%Te nanopowder showed higher value than one of the sintered body of the mechanically milled 12.64 wt.%Bi-29.47 wt.%Sb-57.89 wt.%Te powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• Survey Research
• /
• v.10 no.1
• /
• pp.113-139
• /
• 2009

It is desirable to use a monthly benchmarked construction indicator which contains the characteristics of statistical data in an annual survey in order to analyze the cyclical phenomenon of the construction activity. The benchmarked indicator is expected to improve the data quality in terms of accuracy, consistency, comparability, and completeness. In this paper, benchmarking methodologies of compiling monthly construction indicators arc researched by using a monthly prompt data holding short - term fluctuations and an annual survey data regarded as more accurate statistics than monthly data. The benchmarking is the methodology by which a high frequency data should he adjusted in order to hold the short-term and cyclical phenomena, and the long - term trend of two data groups with ensuring the consistency of an annual summation between a high frequency data and a low frequency data. This paper considered the numerical approach like pro rata distribution method, proportional Denton method, EFL or HP filter Benchmark - to - Indicator ratio method, and the model - based approach such as Chow and Lin method, $Fem{\acute{a}}ndez$ method. Also, the benchmarked construction indicators were estimated by early mentioned benchmarking methods with practical data, and these methods were empirically reviewed and compared. In case of construction indicators with severe seasonal fluctuations and irregulars, the numerical approach seemed to be performed more correctly than the model- based approach. Among numerical methods, the proportional Denton method used in general was a little nice. The HP filter Benchmark - to - Indicator ratio method may be considered with survey errors or measurement errors in an annual survey data.