• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.843-849
• /
• 1989

Effect of Bi2O3/Li2CO3 on low temperature sinteirng and dielectric property of BaTiO3 ceramics has been investigated. For the specimen sintered at 110$0^{\circ}C$, it was densified to 96% of BaTiO3 theoretical density by the addition of 1.0-1.25w/o Bi2O3/Li2CO3. Maximum dielectric constant increased and Curie temperature lowered with the increase of Bi2O3/Li2CO3 content, which probably can be explained by thne substitution of Bi3+, Li1+ on BaTiO3 lattice. The volatilization of Li1+, resulting from the increase of soaking time at 110$0^{\circ}C$ leads to the increase of Curie temperature and tetragonality of the specimen.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.147-147
• /
• 2013

Multiferroic material $BiFeO_3$ (BFO) is a typical multiferroic material with a room-temperature magnetoelectric coupling in view of high magnetic- and ferroelectric-ordering temperatures (Neel temperature $T_N$ ~ 647 K and Curie temperature TC ~1,103 K). Rare-earth ion substitution at the Bi sites is very interesting, which induces suppressed volatility of the Bi ion and improved ferroelectric properties. At the same time, the Fe-site substitution with magnetic ions is also attracting, since the enhanced ferromagnetism was reported. In this study, BFO, $Bi_{0.9}Dy_{0.1}FeO_3$ (BDFO), $BiFe_{0.97}Co_{0.03}O_3$ (BFCO) and $Bi_{0.9}Dy_{0.1}Fe_{0.97}Co_{0.03}O_3 $ (BDFCO) compounds were prepared by conventional solid-state reaction and wet-mixing method. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h. The samples were immediately put into an oven, which was heated up to 800oC and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies). Dy and Co co-doping at the Bi and the Fe sites induce the enhancement of both magnetic and ferroelectric properties of $BiFeO_3$.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• 한국재료학회지
• /
• 제7권2호
• /
• pp.157-161
• /
• 1997

$Bi_{2}Sr_{2}Ca_{0.8}Y_{0.2}Cu_{2}^{16}O_{8+\delta}$의 $^{16}O$이 $^{18}O$으로 치환되는 $^{16}O-^{18}O$ 교환반응의 결정학적 위치 의존성에 대하여 고찰하였다. $Bi_{2}Sr_{2}Ca_{0.8}Y_{0.2}Cu_{2}^{16}O_{8+\delta}$의 라만스펙트럼 측정결과 297, 464, $623cm^{-1}$에서 라만밴드가 관찰되었으며 이들은 모두 시료중의 $^{16}O$이 $^{18}O$으로 치환됨에 따라 저파수측으로 이동하였다. 이러한 동위체 치환에 따른 저파수측으로의 이동속도는 297, $464cm^{-1}$ 라만밴드의 경우 거의 같았지만 $623cm^{-1}$ 라만밴드의 경우 두 라만밴드보다 현저히 늦었다. 이는 $^{16}O-^{18}O$ 교환반응이 산소의 결정학적 위치에 의존한다는 사실을 시사한다. 이로부터 정방정계를 가정하고 623, 464, $297cm^{-1}$ 라만밴드를 각각 $O_{pl}(A_{g}),\;O_{ap}O_{Bi}$의 모드로 귀속하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.69-72
• /
• 1999

A Well oriented Bi$_2$re$_2$CaCu$_2$O$\sub$8/(Bi2212) superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape using method in which Cu-free BSCO powder mixture was printed on copper plate and heat-treated. And we examined the mechanism for the rapid formation of Bi2212 superconducting films from observing the surface microstructure with heat-treatment time. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Following the partial melting, the Bi$_2$Sr$_2$CaCu$_2$O$\sub$8/ superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. It was confirmed that the phase colony from the phase diagram of Bi$_2$O$_3$-(SrO+CaO)/2-CuO system is similar to the observed result.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.550-553
• /
• 2001

$Li_{2}O-P_{2}O_{5}-Bi_{2}O_{3}-V_{2}O_{5}$ glass containing glass former, $P_{2}O_{5}$ and $Bi_{2}O_{3}$ was prepard by melting the glass batch in pt. erucible followed by guenching on the copper plate. We found that $Li_{2}O-P_{2}O_{5}-Bi_{2}O_{3}-V_{2}O_{5}$ glass-ceramics obtained from the crystallization of glass showed signifieantly higher capacity and longer cycle life tham $LiV_{3}O_{8}$ made from powder synthesis. In this paper, we described crystallization process and $LiV_{3}O_{8}$ crystal growth in glass matrix by increasing temperature. The electrochemical properties were strongly affected by $LiV_{3}O_{8}$ crystal growth in matrix

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.550-553
• /
• 2001

Li$_2$O-P$_2$O$_{5}$-Bi$_2$O$_3$-V$_2$O$_{5}$ glass containing glass former, P$_2$O$_{5}$ and Bi$_2$O$_3$ was prepard by melting the glass batch in pt. erucible followed by quenching on the copper plate. We found that Li$_2$O-P$_2$O$_{5}$-Bi$_2$O$_3$-V$_2$O$_{5}$ g1ass-ceramics obtained from the crystallization of glass showed significantly higher capacity and longer cycle life tham LiV$_3$O$_{8}$ made from powder synthesis. In this paper, we described crystallization process and LiV$_3$O$_{8}$ crystal growth in glass matrix by increasing temperature. The electrochemical properties were strongly affected by LiV$_3$O$_{8}$ crystal growth in matrix.rowth in matrix.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.487-492
• /
• 1989

The microstructure and electrical properties of ZnO-Bi2O3 system with Bi2O3(0.5~5mol%) content have been investigated in relatin to sintering temperature and atmosphere. The grain size of ZnO increases sharply with Bi2O3(0.5~5mol%) content, but over 0.5mol% Bi2O3 increased less rapidly when sintered at 120$0^{\circ}C$. Electrical characteristics varied with sintering atmosphere and air-sintered conditions showed comparatively lower nonlinear exponents than the double-crucible conditions. Calculated barrier voltage was about 1.7V.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.144.1-144
• /
• 2003

• 한국자기학회지
• /
• 제16권1호
• /
• pp.28-33
• /
• 2006

[ $Bi_{2/3}La_{1/3}FeO_3$ ]분말을 졸-겔법을 이용하여 제조하였다. 결정학적 및 자기적 성질을 열분석장치(TG-DTA), x-선 회절분석기(XRD), 주사전자현미경(SEM) 및 Mossbauer분광기를 이용하여 연구하였다. $Bi_{2/3}La_{1/3}FeO_3$ 단일상은 $600^{\circ}C$에서 3시간 동안 공기 중에서 열처리하여 얻을 수 있었으며, x-선 회절분석 결과 $Bi_{2/3}La_{1/3}FeO_3$ 분말은 rhombohedral 형태로 변형된 단순 perovskite 구조를 가졌으며 이때 격자상수 $=3.985\pm0.0005{\AA},\;\alpha=89.5^{circ}$이었다. Mossbauer스펙트럼 분석결과 $Bi_{2/3}La_{1/3}FeO_3$의 Neel온도는 $680\pm3K$임을 알 수 있었다. $Bi_{2/3}La_{1/3}FeO_3$의 이성질체이동 값은 0.27mm/s 값을 가졌으며, 이는 $Bi_{2/3}La_{1/3}FeO_3$.의 Fe 이온이 가지는 이온가는 $Fe^{3+}$의 high spin상태임을 보여주었다. $Bi_{2/3}La_{1/3}FeO_3$의 결정내의 Debye 온도는 $305\pm5K$ 평균 초미세 자기장 $H_{hf}(T)$는 $T/T_N<0.7$영역에서 $[H_{hf}(T)-H_{hf}(0)]/H_{hf}(0)=-0.42(T/T_N)^{3/2}-0.13(T/T_N)^{5/2}$로 spin wave가 결정 내에서 잘 여기 됨을 알 수 있었다.