• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.353-360
• /
• 2004

In this Paper, We propose an efficient iteration decoding control method with variable iteration decoding of iteration codes decoding using Cyclic Redundancy Check. As the number of iterations increases, the bit error rate and frame error rate of the decoder decrease and the incremental improvement gradually diminishes. However, when the iteration decoding number is increased, it require much delay and amount of processing time for decoding. Also, It can be observed the error nor that the performance cannot be improved even though increasing of the number of iterations and SNR. So, Suitable number of iterations for stopping criterion is required. we propose variable iteration control method to adapt variation of channel using Frame Error-Check indicator. Therefore, the amount of computation and the number of iterations required for iteration decoding with CRC method can be reduced without sacrificing performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.413-420
• /
• 2006

HMIPv6 is designed to reduce the signaling load to external network and improve handover speed of MN by including Mobility Anchor Point(MAP) in local handover. However in this case of macro handover, it's just used pervious MIPv6 handover algorithm. So, it occurs packet loss and transmission delay problem. In this paper, we propose the mechanism applying the HMIPv6 for Fast Handover to choose suitable to the condition buffering handover. The condition for the selection is result distance measurement between MN and CN, between MN and NAR. Furthermore, using F-SNOOP protocol, it is possible to improve wireless network performance. Wireless network has high Bit Error Rate(BER) characteristic because of path loss, fading, noise and interference. TCP regards such errors as congestion and starts congestion control. This congestion control makes packet transmission rate low. However, F-SNOOP improves TCP performance based on SNOOP and Freeze TCP that use Zero Window Advertisement(ZWA) message when handoff occurs in wireless network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1258-1267
• /
• 2011

In this paper, using the indoor LED-ID communication system have researched for how to transmit video signals. In LED-ID communications use the LEDs for lighting features at the same time communication is an effective way to implement. This proposed system using Visible light(RGB) as way to transmit signals, depends on the mixture RGB, which decided the color of light, moreover, each things determined their performance. However, if the video signal were fixed allocated RGB to transmit such as the original system, the importance of the each signals a different occur the limit on the quality of the video than SVC signals. In order to solve this problem in this paper, according to the RGB mixture ratios analyze the performance for the White LED, which analyzed based on allocating the SVC signal by transmitting to improve the quality of the video was about how researched.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.438-449
• /
• 2012

This paper presents new CRC-p codes for VHF band maritime wireless communication system based on performance analysis of various CRC codes. For this purpose, we firstly describe the method of determination of undetected error probability and minimum Hamming distance according to variation of CRC codeword length. By using the fact that the dual code of cyclic Hamming code and primitive BCH code become maximum length codes, we present an algorithm for computation of undetected error probability and minimum Hamming distance where the concept of simple hardware that is consisted of linear feedback shift register is utilized to compute the weight distribution of CRC codes. We also present construction of transmit data frame of VHF band maritime wireless communication system and specification of major communication parameters. Finally, new optimal CRC-p codes are presented based on the simulation results of undetected error probability and minimum Hamming distance using the various generator polynomials of CRC codes, and their performances are evaluated with simulation results of bit error rate based on the Rician maritime channel model and ${\pi}$/4-DQPSK modulator.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.387-396
• /
• 2016

Multiuser communication has been an important research area of underwater acoustic communications and networking. This paper studies the use of adaptive orthogonal frequency-division multiple access (OFDMA) in a downlink scenario, where a central node sends data to multiple distributed nodes simultaneously. In practical implementations, the instantaneous channel state information (CSI) cannot be perfectly known by the central node in time-varying underwater acoustic (UWA) channels, due to the long propagation delays resulting from the low sound speed. In this paper, we explore the CSI feedback for resource allocation. An adaptive power-bit loading algorithm is presented, which assigns subcarriers to different users and allocates power and bits to each subcarrier, aiming to minimize the bit error rate (BER) under power and throughput constraints. Simulation results show considerable performance gains due to adaptive subcarrier allocation and further improvement through power and bit loading, as compared to the non-adaptive interleave subcarrier allocation scheme. In a lake experiment, channel feedback reduction is implemented through subcarrier clustering and uniform quantization. Although the performance gains are not as large as expected, experiment results confirm that adaptive subcarrier allocation schemes based on delayed channel feedback or long term statistics outperform the interleave subcarrier allocation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.1-7
• /
• 2010

In this paper, the performance of the soft-decision-and-forward (SDF) protocol in the cooperative communication network with one source, one relay, and one destination, where each node has two transmit and receive antennas, is analyzed in terms of the bit error rate (BER) obtained from the pairwise error probability (PEP). For the slow-varying Rayleigh fading channel, the optimal and suboptimal power allocation ratios are determined without feedback. The optimal power allocation can be obtained by minimizing the average PEP. For the tractability, an alternative strategy of maximizing the product SNR of direct and relay links, which we call the suboptimal power allocation, is considered. Through the numerical analysis, we show that the performance gap between the suboptimal and the optimal power allocation is negligible in the high SNR region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.889-895
• /
• 2010

MIMO system generally requires more than one antenna at the communication device. However, many wireless devices are limited by size, cost or hardware complexity to one antenna. To overcome such restrictions, we used a new technique, called cooperative communication. We propose a new cooperative transmission strategy system using cross-layer coding method base on H-ARQ for optimal communication. Proposed cooperative H-ARQ system that can improve the above problems and can get the better performance. In proposed cooperative system with H-ARQ method, if the received signal from source node is satisfied by the destination preferentially, the destination transmit ACK message to both relay node and source node, and then recovers the received signal. In addition, if ARQ message indicates NACK message, relay node operates selective retransmission. Based on the simulation results in aspect to BER performance and throughput, the proposed method which combined cooperative system with H-ARQ based on cross-layer coding can improve spectral efficiency reliability of system compared with that of general one by one system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1522-1533
• /
• 2001

In this paper, we handle the estimation method of the received $E_{b}l1_{o}$ for forward closed-loop power control in cdma2000 systems. The estimation of MS-received $E_{b}l1_{o}$ utilizes the symbols related to the forward power control subchannel transmission. The estimation of the received bit energy and noise variance is analyzed for the frequency-selective Rayleigh fading channel. In order to improve SIR (signal-to-interference), the estimation of the received bit energy is made by the coherent combining of the rake-fingers and received I/Q symbols. And, in this paper, we evaluate the performance of forward closed-loop power control according to the mobile speed and the power adjustment step size in terms of the bit error rate (BER) and power control error. Simulation results present the optimal power adjustment step sizes according to the mobile speeds.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.23-27
• /
• 2014

In this paper, we propose a soft demapping method for 64-ary APSK in the DVB-S3 system. The proposed method in this paper uses the hard decision threshold (HDT) line for each constituent bit in a symbol, and calculates the soft bit information with the distance between the HDT line and the detected symbol. If the HDT lines are defined in a simple manner, the complexity to estimate soft information can be largely reduced compared with the maximum likelihood detection (MLD) which has an exponential complexity. By considering this, we first derive HDT lines for each constituent bit for a 64-APSK symbol, and propose a method to calculate soft bit information. We simulate the BER performance of the proposed scheme by using a turbo codes which requires soft-input-soft-output information, and compare it that of the MLD. The result show that the proposed scheme produces approximating performance to MLD with largely reduced complexity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4462-4466
• /
• 2013

In optical system, the signal and additive noise for statistical properties of a variety of ways to evaluate the performance of the system is essential for the optimization. In this paper, performance analysis of spectrum-sliced optical system in the optical pre-amplifier in the receiver the received signal by including the error limits for the bit that is, the bit error rate (BER: Bit Error Rate) required to maintain the average optical power represents the number of photons per bit is included in this paper to digital form, noticeable signal the receiver to calculate the sensitivity of the method for the calculation was performed. The general strength of the transmission of the modulated signal and digital signal transmission was required for the comparison of optical power. As shown in Figure 3, the general strength of the digital signal transmission system for transmitting a modulated signal compared with the case is improved by at least 10dB.