• Clean Technology
• /
• v.27 no.2
• /
• pp.139-145
• /
• 2021

The purpose of this study is to recover valuable metals from spent batteries using a dry process. We focused on the effect of the smelting temperature on the composition of recovered solid and liquid products and collected gaseous products. After removal of the cover, the spent battery was left in NaCl solution and discharged. Then, the spent battery was made into a powder form through a crushing process. The smelting of the spent battery was performed in a tubular electric furnace in an oxygen atmosphere. For spent lithium-ion batteries, the recovery yield of the solid product was 80.1 wt% at a reaction temperature of 850 ℃, and the final product had 27.2 wt% of cobalt as well as other metals such as lithium, copper, and aluminum. Spent nickel-hydrogen batteries had a recovery yield of 99.2 wt% at a reaction temperature of 850 ℃ with about 37.6 wt% of nickel and other metals including iron. For spent nickel-cadmium batteries, the yield decreased to 65.4 wt% because of evaporation with increasing temperature. At 1050 ℃, the recovered metals were nickel (41 wt%) and cadmium (12.9 wt%). Benzene and toluene, which were not detected with the other secondary waste batteries, were detected in the gaseous product. The results of this study can be used as basic data for future research on the dry recycling process of spent secondary batteries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.73-82
• /
• 2021

Objectives: This study aimed to investigate the public cognition and information acquisition route for heavy metals and organic solvents in the general population in order to provide information for the development of public relations materials. Methods: The study was carried out by questionnaire from January to March 2011 by an interview with trained surveyors. There were 700 participants, divided by gender and age. A questionnaire was issued consisting of subjective and objective cognition evaluation items and questions about information acquisition route and preferred information acquisition route for six heavy metals and five organic solvents. Data were expressed as a percentage using the SPSS 23.0 software package. Result: For heavy metals, subjective and objective cognition degrees were higher in the order of lead, mercury, cadmium, and arsenic. They were higher among males than females, and in adults compared to school-age subjects. For organic solvents, both cognition degrees were high in the order of acetone, benzene, and formaldehyde. However, cognition degree by gender and age showed a complex pattern. As a response to information acquisition route, broadcast media had the highest in all ages and genders, followed by word of mouth from neighbors in elementary school children, school education or expert lectures in middle and high school students up to people in their 30s, and print media among those in their 40s to over 60s. There was no difference in the order by gender. As a response to preference for information acquisition route, broadcast media also proved the highest in all ages and genders, followed by school education or professional lectures among those in elementary school and over their 60s, and the internet in other age groups. Females preferred school education or expert lectures and word of mouth from neighbors, while males preferred the internet. In the case of the internet, the ranking was higher for preferred information acquisition route compared with the ranking for information acquisition route. Conclusions: This data on cognition degree, information acquisition route, and preferred information acquisition route according to gender and age can provide basic data for the development of educational and promotional materials for heavy metals and organic solvents exposure management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.583-592
• /
• 2020

This study assessed source depletion in the vadose zones of contaminated sites. The possible range of infiltration rate in Korea was statistically analyzed. The results showed a trend of decreasing leachate concentration of 13 pollutants used for risk assessment. Among them, benzene, ethylbenzene, toluene, and xylene showed a lower leachate concentration in groundwater over time due to their low distribution coefficient and also possible biodegradation effects. The average values of the relative concentration could be taken as a default index due to a very small range of uncertainties. In the case of heavy metals, it was shown that the leachate concentration in a pollutant does not decrease over time. Considering the annually different infiltration, a site-specific source-depletion scenario was applied to Cheongju in North Chungcheong Province. The result was expressed as a time series of the relative concentration of the leachate concentration, and this was compared to the trend by averaged Korean infiltration. Finally, an open-source code that used Python was used to help calculate the leachate concentration by this site-specific infiltration scenario.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.327-333
• /
• 2020

Performance of a portable GC that can be utilized for the real time determination of volatile organic compounds in air was evaluated. It employs purified/compressed ambient air as the carrier gas eliminating the need for high pressure gas tanks. The compact system with dimensions of 35 × 26 × 15 ㎤ and weight of 5 kg is powered by either a 24 V DC external adapter or battery pack. Chromatograms of the mixture sample including benzene, toluene, ethylbenzene, and oxylene at concentrations of 1 ppmv and 20 ppmv represent a good reproducibility: 3.79% and 0.48% relative standard deviations (RSDs) for peak area variations; 0.40% and 0.08% RSDs for retention times. The method detection limit was 0.09 ppmv. A 30 m long, 0.28 mm I.D. column operated at an optimal condition yielded a peak capacity of 61 with good resolution for a 10 min isothermal analysis. The relative standard deviations (RSD) of the peak area variations and retention times during consecutive measurements over 27 h were less than 2.4%RSD and 0.5%RSD, respectively. Thus, this instrument makes it suitable for continuous and field analysis of low-concentration VOC mixtures in the indoor/outdoor environment as well as the spillage accident of hazardous chemicals.

• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.213-219
• /
• 2021

Hazardous substances are formed during food manufacturing, processing, or cooking, and may pose a threat to food safety. Here, we present a dietary exposure assessment of Korean consumer's intake of hazardous materials through a Total Diet Study (TDS) which was conducted by the Ministry of Food and Drug Safety (MFDS). The levels of exposure to materials such as acrylamide, furan, biogenic amines, etc., were estimated and risk assessments were then performed. Acrylamide and furan were selected as hazards with high priority of reduction control due to their having a margin of exposure (MOE) lower than 10,000. Risk assessment of exposure to ethyl carbamate, benzene and 3-MCPD showed MOEs higher than 100,000, indicating "safe". Dietary exposure to polycyclic aromatic hydrocarbons and benzopyrene was also found to be safe MOE levels >10,000. In addition, the results indicated safe MOEs (>1,000,000) for heterocyclic amines, nitrosamines, and biogenic amines. Most of the potential food contaminants were being kept at safe levels, however, it is necessary to continue to monitor and control exposure levels in accordance with the 'as low as reasonably achievable' (ALARA) principle.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.903-913
• /
• 2021

Three-type PVC membranes denoted by AEM-1, AEM-2, and AEM-3 with a cross-linked anion-exchange group were prepared by substitution reaction of PVC with triethyldiamine (TEDA), 1,4-dimethylpiperazine (DMP), and 1,4-bis(imidazol-1-ylmethyl)benzene (BIB) in cyclohexanone, respectively. We confirmed the successful preparation of the AEM-1, AEM-2, and AEM-3 via ionic conductivity (S/cm), water uptake (%), contact angle, ion-exchange capacity (m_eq/g), thermal properties, SEM and XPS analysis, respectively. The electrochemical capacitor experiments using PVC membrane with cross-linked anion-exchange group in organic electrolytes were performed. The prepared AEM-1, AEM-2 AEM-3 have a good stability by charge and discharge performance in organic electrolyte. As a result, the AEM-2 and AEM-3 membrane based on PVC prepared by the solvent casting method after substituent reaction is suitable for the use as a separator in organic electrochemical capacitor (supercapacitor).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.2
• /
• pp.135-146
• /
• 2022

In order to prevent microbial contamination and safely use cosmetics, it is essential to possess preservative power. In this study, the antifungal effect was confirmed by improving the preservative system of the aqueous dispersion formulation, which has a weak preservative power against fungi, and various preservative systems were established to strengthen the preservative power against fungi. Five kinds of raw materials (sodium anisate, p-anisic acid, caprylhydroxamic acid, o-cymen-5-ol, hydroxyacetophenone) that have a benzene ring structure having a hydroxyl group and exist as protonated form in cosmetic formulations expected to improve antifungal activity in cosmetics were selected, and the minimum growth inhibitory concentration of the raw materials was determined through MIC assay. It was confirmed that the preservative power against mold was improved through the preservative efficacy test of 4 types of water dispersion formulations (cream, lotion, toner, and sun cream) in which 4 types of raw materials showing antimicrobial activity against mold were added to the preservative system. When p-anisic acid was used, it was confirmed that the preservative activity against mold was strengthened without the effect of inhibiting the preservative power against bacteria and yeast in all four formulations.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.109-116
• /
• 2021

The explosion of a chemical tanker ship during cargo transshipment via double-banking at Ulsan Port, resulted in major damage including fires involving nearby ships. As a follow-up measure to prevent the recurrence of similar accidents, the 'Safety Management of Dangerous Goods in Port' was established, and the designation of a transshipment pier for dangerous goods is required given the risk of explosion and the impact on major facilities in the port. This study evaluated the Fire & Explosion Index of major transshipment cargoes in Ulsan Port to design a transshipment pier based on the Explosion Risk Assessment. Based on the results of Fire & Explosion Index evaluation of styrene monomer and benzene, severe explosion risk was confirmed, and the exposure radius was calculated. Based on the results of the exposure radius, the risk range for each major pier was calculated, and 12 terminals were proposed as transshipment pier candidates considering port facilities, surrounding dangerous facilities, and residential aspects. Since the results of the study suggest transshipment piers based on the risk radius alone, maritime traffic safety, pier and mooring facilities, safety facilities and accessibility for emergency response should be considered comprehensively to designate actual transshipment piers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.302-324
• /
• 2022

Objectives: The objective of this study is to investigate exposure to occupational carcinogens in the nationwide electronics industries and to establish a strategy for control of occupational carcinogens in South Korea. Methods: We evaluated occupational carcinogens as defined by International Agency for Research on Cancer (IARC) using a nationwide work environment measurement database on the electronics industry in South Korea measured between 2013 and 2017 in accordance with the Occupational Safety and Health Act. Results: The number of occupational carcinogens found in the electronics industry in South Korea were: 20 for IARC Group 1, 14 for Group 2A, and 30 for Group 2B. The occupational carcinogens (Group 1) most frequently exposed were strong-inorganic-acid mists containing sulfuric acid (sulfuric acid), welding fumes, mineral oils (untreated or mildly treated), nickel compounds, silica dust, crystalline substances in the form of quartz or cristobalite, formaldehyde, arsenic and inorganic arsenic compounds, chromium (VI) compounds, trichloroethylene, cadmium and cadmium compounds, vinyl chloride, ethylene oxide, wood dust, beryllium and beryllium compounds, 1,3 butadiene, benzene, and others. Among them, the carcinogens (Group 1) exceeding the acceptable standard were trichloroethylene, formaldehyde, and ethylene oxide. The working environment measurement system as regulated by Occupational Safety and Health Act is not properly assessed and managed for occupational carcinogens in South Korea. A component analysis for all materials used should be set up to practically reduce occupational carcinogens. A ban on the use of occupational carcinogens and the development of alternative materials are needed. The occupational carcinogens below the acceptable standards should be carefully examined and a new standard for exposure needs to be established. Conclusions: The Occupational Safety and Health Act should be improved to identify and monitor occupational carcinogens at work sites. A strategy for occupational safety and health systems should be provided to give direction to workers' needs and right to know.

• Clean Technology
• /
• v.29 no.3
• /
• pp.200-216
• /
• 2023

Ginkgo leaves are considered waste biomass and can cause problems due to the strong insecticidal actions of ginkgolide A, B, C, and J and bilobalide. However, Ginkgo leaf biomass has high organic matter content that can be converted into fuels and chemicals if suitable technologies can be developed. In this study, the effect of pyrolysis temperature, minimum fluidized velocity, and Ginkgo leaf size on product yields and product properties were systematically analyzed. Fast pyrolysis was conducted in a bubbling fluidized bed reactor at 400 to 550℃ using silica sand as a bed material. The yield of pyrolysis liquids ranged from 33.66 to 40.01 wt%. The CO₂ and CO contents were relatively high compared to light hydrocarbon gases because of decarboxylation and decarbonylation during pyrolysis. The CO content increased with the pyrolysis temperature while the CO₂ content decreased. When the experiment was conducted at 450℃ with a 3.0×U_mf fluidized velocity and a 0.43 to 0.71 mm particle size, the yield was 40.01 wt% and there was a heating value of 30.17 MJ/kg, respectively. The production of various phenol compounds and benzene derivatives in the bio-oil, which contains the high value products, was identified using GC-MS. This study demonstrated that fast pyrolysis is very robust and can be used for converting Ginkgo leaves into fuels and thus has the potential of becoming a method for waste recycling.