• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2015

The aim of this study was to investigate the bacteriophage removal in various clay minerals and clay-amended soils. Batch experiments in kaolinite, montmorillonite, and bentonite showed that kaolinite was far more effective at the MS2 removal than montmorillonite and bentonite. In kaolinite, the log removal increased from 0.046 to 2.18, with an increase in the adsorbent dose from 0.3 to $50g\;L^{-1}$, whereas the log removals in montmorillonite and bentonite increased from 0.007 to 0.40 and from 0.012 to 0.59, respectively. The MS2 removal in kaolinite-amended silt loam soils was examined at three different soil-to-solution (STS) ratios. Results indicated that the log removal of MS2 increased with an increase in the kaolinite content and the STS ratio. At the STS ratio of 1:10, the log removal of MS2 increased from 2.33 to 2.80 with an increase in the kaolinite content from 0% to 10% in kaolinite-amended soils. The log removals of MS2 at the STS ratios of 1:2 and 1:1 increased from 2.84 to 3.47 and from 3.46 to 4.76, respectively, with an increase in the kaolinite content from 0% to 10%. Results also indicated that the log removals of PhiX174 and $Q{\beta}$ in kaolinite-amended soils were similar to each other, but they were far lower than those of MS2 at all the kaolinite contents. The log removal of PhiX174 increased from 0.16 to 0.32, whereas the log removal of $Q{\beta}$ changed from 0.17 to 0.22 with an increase in the kaolinite content from 0% to 10%.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.3-8
• /
• 1995

Anchors find their use in providing tie-back resistance for submerged footings, transmission towers, tunnels and ocean structures. Laboratory model teats were performed for the short-term net ultimate uplift capacity of a circular anchors with respect to various embedment depths and moisture content in saturated bentonite. The tests have been conducted with the anchor at two different moisture contents. Based an the model test results, empirical relationships between the net load, rate of strain, and time have been developed. Test results are as follows. 1) In creep tests for load versus ultimate uplift capacity, the displacement of plate anchors rapidly increases during the primary stage but thereafter becomes constant over a period of time. 2) Displacement increased with the increase of the sustain load and embedded ratio in soil. 3) If the load is less than or equal to 75% of the short-term ultimate uplift capacity, a complete pullout does not occur due to creep.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).

• Journal of Korea Foundry Society
• /
• v.4 no.2
• /
• pp.89-95
• /
• 1984

A Study on the Mechanical Properties of Molding Sand with Various Water/Clay Ratio A standard sample of molding sand was prepared by adding a various amount of bentonite, which has water/clay ratio from 0.4 to 0.6, into artificial sand, Hanyoung #6. The results obtained by measuring the room temperature properties of green mold are as follows. 1. This compressive strength of green molds which have 4% and 10% of bentonite decreased with increasing water/clay ratio, but the maximum strengths of 4.3 (psi) and 7.2 (psi) were observed in the samples with 6%, 8% bentonite respectively when the water/clay is 0.45. 2. The optimum water/clay ratio for strength and permeability increased from 0.4 to 0.5 with increasing clay. 3. The green compressive strength was proportional to the hardness. 4. Deformation increased with increasing water/clay ratio. 5. Flowability decreased with increasing water/clay ratio and clay content in molding sand.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.239-244
• /
• 2008

For physiological function of aloe concentrate by ultrafiltration (UF) process, jack bean urease inhibitory activity and bentonite flocculating activity of UF aloe concentrate was investigated and compared with fresh aloe gel. Urease inhibitory activity of UF aloe concentrate ranged from 87 to 90% in 1 mL sample. Also, urease inhibitory activity of UF aloe concentrate increased about 10% by heat treatment showing the heat stability. From Lineweaver-Burk plot for UF aloe concentrate, urease inhibition pattern indicated general non-competitive inhibition. From flocculation test of UF aloe concentrate about 1% (w/v) bentonite suspension, maximum flocclulating activity of 97% was obtained at 0.5 mL addition of UF aloe concentrate/ 5 ml bentonite suspension. However, flocculating activity of 81% was obtained at 1 mL addition of UF aloe concentrate/ 5 mL bentonite suspension, which was typical flocculating behavior of polymers with re-dispersion at overdose area. FT-IR spectra of UF aloe concentrate showed the characteristic patterns of $\beta$-binding polysaccharide and less deacetylation indicating higher level of bioactive polysaccharide content.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.2
• /
• pp.23-31
• /
• 2004

Trichloroethylene(TCE), Cr(VI), and nitrate removal efficiency of a novel reactive barrier were experimented, and the types of corrosion species that form on the surface of the iron and bentonite as a result of reaction were investigated with Raman spectrophotometer. The reactive barrier is composed of bentonite and zero valent iron(ZVI), and this can substitute conventional geosynthetic clay liners for landfill leachate. Tests were performed in batch reactors for various ZVI content (0, 3, 6, 10, 13, 16, 20, 30, 100 w/w %) and pH. The reduction rates and removal efficiencies of TCE, Cr(VI) and nitrate increase at pH 7 buffered solution. As ZVI content increases, TCE, Cr(VI) and nitrate removal efficiencies increase. From the result of analysis with Raman spectrophotometer, Fe-oxides were observed, which are strong adsorbers of cantaminants. Magnetite can be also beneficial to the long term performance of the iron metal.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.354-358
• /
• 2014

Field study was conducted to evaluate the agronomic effectiveness of sulphur-bentonite fertilizer. Soil pH was slightly lower tendency to the increase of sulphur-bentonite fertilization, but did not indicate a sharp decline in soil pH. The T-N contents in the $6kg/1000m^2$ plot was higher to 700 mg/kg and the organic matter content was 1.29% in the $3kg/1000m^2$ plot. The content of available-P was also increased to 289 mg/kg in the $6kg/1000m^2$ plot. The growth characteristics of the young radish (Raphanus sativus L.) has significantly more in $3kg/1000m^2$ plot on upper part, and more on under part in $6kg/1000m^2$ plot. Therefore, it is concluded that the application of sulphur-bentonite fertilizer was thought to be effective for the chemical characteristics of soil and crop growth enhancement.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.

• Geomechanics and Engineering
• /
• v.12 no.2
• /
• pp.211-221
• /
• 2017

A laboratory investigation into crude oil contaminated sand-concrete interface behavior is performed. The interface tests were carried out through a direct shear apparatus. Pure sand and sand-bentonite mixture with different crude oil contents and three concrete surfaces of different textures (smooth, semi-rough, and rough) were examined. The experimental results showed that the concrete surface texture is an effective factor in soil-concrete interface shear strength. The interface shear strength of the rough concrete surface was found higher than smooth and semi-rough concrete surfaces. In addition to the texture, the normal stress and the crude oil content also play important roles in interface shear strength. Moreover, the friction angle decreases with increasing crude oil content due to increase of oil concentration in soil and it increases with increasing interface roughness.