• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2032-2037
• /
• 2009

본 논문은 공용중인 교량구조물의 내하력 평가시 획일적이고 실제 거동특성을 적극적으로 활용하지 않아 발생할 수 있는 내하력 평가의 오류에 대하여 연구하였다. 내하력의 평가시 지점의 경계조건과 같은 현재의 거동특성을 반영하기 위하여 초기 결함을 갖는 부재에 대한 좌굴방정식에 처짐을 적용시켜 산정된 축방향력과 처짐에 의해 구해진 모멘트를 고려하여 교량의 내하력을 평가하였다. 기존의 내하력 평가시에 다소 획일적으로 적용되어지는 응력보정 계수를 좌굴방정식을 통하여 각 주형에 대하여 선 반영함으로서 내하력 평가의 오류를 다소 제거하고자 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.209-216
• /
• 2003

교량의 내하력평가는 유지관리에 있어서 매우 중요한 요소이다. 재하시험과 구조해석에 의한 처짐이 차이를 보이는 이유는 여러 가지가 있다. 특히, 지점의 실제 거동특성을 고려하지 않고 일률적으로 모델링을 하는 경우에 이러한 문제가 더욱 심화될 수 있다. 이는 응력보정계수를 크게 산정하여 내하력을 실제보다 더 크게 평가할 우려가 있다. 본 연구에서는 지점의 거동특성을 고려하여 산정한 지점의 부모멘트를 이용하여 실제거동에 근접한 구조해석을 실시하야 보다 정확한 내하력을 평가하고자 한다.

• Steel and Composite Structures
• /
• 제6권1호
• /
• pp.33-53
• /
• 2006

The rotational behaviour of bolted extended end plate beam-to-column connections is evaluated in the context of the component method. The full moment-rotation response is characterized from the force-deformation curve of the individual joint components. The deformability of end plate connections is mostly governed by the bending of the column flange and/or end plate and tension elongation of the bolts. These components form the tension zone of the joint that can be modelled by means of "equivalent T-stubs". A systematic analytical procedure for characterization of the monotonic force-deformation behaviour of individual T-stub connections is proposed. In the framework of the component method, the T-stub is then inserted in the joint spring model to generate the moment-rotation response of the joint. The procedures are validated with the results from an experimental investigation of eight statically loaded extended end plate bolted moment connections carried out at the Delft University of Technology. Because ductility is such an important property in terms of joint performance, particularly in the partial strength joint scenario, special attention is given to this issue.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.63-71
• /
• 1992

Generally, Web & Flange of I shape beam are composed of plane for optimization of measurement in investigating the behavior resistant to horizontal force and bending moment on large section Therefore, longitudinally traperzoidal web section beam has an important function as a body for carrying more load and ensuring more support area. There is only a limited usefulness for analyzing the behavior of web section with opening. It is experimentally verified that this traperzoidal web section has a good resistant caopacity. conclustions on the above research results are as follows : 1) resistant capacity on the above can be more 15% increased than normal case 2) stiffener welding work and complexity of shopdrawing can be excluded in advance 3) traperzoidal section can be applied in structural practice.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.775-780
• /
• 2000

This paper was aimed to investigate the shear strengthening effect of the pre-loaded reinforced concrete beams strengthened by carbon fiber sheet (CFS) & steel plate. Main test parameters were the magnitude of pre-loading at the time of the retrofit, the strengthening methods of carbon fiber sheet and aid ratio. A series of seventeen specimens was tested to evaluate the corresponding effect of each parameters such as maximum load capacity, load-deflection relationship, load-strain relationship and failure mode. As a result, using the steel plate can increase the capacity of not only shear but also bending moment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.357-362
• /
• 2001

The pipe fracture tests were performed on 102mm-Sch.80 carbon steel pipe with various local wall thinning shapes, in order to understand failure behavior of thinned pipe. Pipe specimens were subjected to monotonic bending moment, using 4-points loading system, under internally pressurized condition. From the results of experiment, the failure mode, load carrying capacity, and deformability of local wall thinning pipe were investigated. Failure mode of thinned pipe depended on magnitude of internal pressure and thinning length as well as loading direction and thinning depth and angle. The variation in load carrying capacity and deformability of thinned pipe with length of thinned area was determined by stress type appled to thinning region and circumferential thinning angle. Also, the effect of internal pressure on failure behavior was dependent on failure mode of thinned pipe, and it promoted crack occurrence and mitigated local buckling at thinned area.

• Steel and Composite Structures
• /
• 제3권2호
• /
• pp.123-140
• /
• 2003

The importance of the research on moment-resistant properties of unstiffened tubular joints and the research background are introduced. The performed experimental research on the bending rigidity and capacity of the joints is reported. The emphasis is put on the discussion of the flexural behavior of the joints including sets of geometrical parameters of the joints and several loading combinations. Procedures and results of loading tests on four full size joints in planar KK and X configuration are described in details at first. Mechanical models are proposed to analyze the joint specimens. Three-dimensional nonlinear FE models are established and verified with the experimental results. By comparing the experimental data with the results of the analysis, it is reported reasonable to carry out the structural analysis under the assumption that the joint is fully rigidly connected, and their bending capacities can assure the strength of the members connected under certain limitation. Furthermore, a parametric formula for inplane bengding rigidity of T and Y type tubular joints is proposed on the basis of FE calculation and regression analysis. Compared with test results, it is shown that the parametric formula developed in this paper has good applicability.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.443-450
• /
• 2009

이 연구는 열하중이 발생하는 구조물에 강판 콘크리트구조를 적용하는 경우, 역학적 특성을 평가하기 위하여 수행하였다. 원자력발전소 구조물 중 사용후 핵연료 저장조 구조물과 같이, 구조물 내부는 지속적인 열 하중을 받고 구조물 외부는 대기에 노출되어 있는 경우, 구조물은내 외부의 온도차이로 인해서 열응력이 발생한다. 본 연구는 이러한 구조물에 강판 콘크리트 구조를 적용할 경우를 가정하여 보 형태의 강판 콘크리트 구조실험체에 온도하중을 재하한 상태에서 휨 내력 및 구조특성을 평가하고 추가적으로 실험체가 항복 시까지 하중을 가력하여 최종 휨내력을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.25-42
• /
• 2023

This paper presents a finite element (FE) simulation of eccentrically loaded lightweight aggregate concrete-encased steel (LACES) columns with H-shaped steel sections, analytical equations are also established to estimate the columns' axial and bending moment interaction capacities. The validity of the proposed models is checked by comparing the results with experimental data. Good agreements between the test and proposed models' results are found with acceptable agreements. Moreover, design parameters, including the lightweight aggregate concrete (LWAC) strength, eccentricity, column slenderness ratio, and confinement, are studied using the FE analysis, and their efficiency factors are discussed. The results show that the ultimate axial capacity of the LACES composite columns subjected to eccentric loading is negatively affected by the increase in the columns' height, but it is positively affected by the increase of the confinement. Increasing the eccentricity and columns' height reduced the columns'stiffness. In addition, the ultimate capacity of the LACES column is significantly influenced by the LWAC strength and eccentricity, where the ultimate capacity of the LACES column is significantly increased by increasing LWAC strength, and it is remarkably decreased by increasing the eccentricity. When the eccentricity changed from zero to 70 mm, the ultimate axial capacity and stiffness decreased by 67.97% and 63.56%, respectively.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.431-438
• /
• 2005

철골-콘크리트 합성 기둥(이하 SC 합성 기둥)은 철골 플랜지 사이를 연결재로 용접하고, 이런 플랜지 사이에 콘크리트를 채워 시공성과 경제성을 얻을 수 있는 새로운 합성 부재이다. 이 연구의 전단계로서 비조밀단면을 사용한 SC 합성 기둥의 축력 실험을 통해 구조 내력이 우수하다는 것을 입증하였으나, 기둥의 특성상 축력과 휨을 동시에 받고 있기 때문에 후속 실험 연구가 필요하게 되었다. 따라서 일정 축력을 받는 비조밀단면을 가진 SC 합성 기둥의 휨 성능을 강축 및 약축 방향으로 실험을 실시하여 각국 기준식과 비교하여 분석하였다. 실험 결과 모든 방향에 대해서 각국 기준식에서 제시하고 있는 축력-휨 모멘트 내력식을 만족하는 결과를 보이고 있었다. 특히 AISC-LRFD 기준식은 합성 기둥의 내력을 지나치게 안전측으로 고려하고 있다. 또한 추후 SC 합성 기둥의 축력-휨 모멘트 내력식은 EC4 기준식으로 산정하는 것이 철골과 콘크리트의 적합 조건을 고려하지 않은 일본 기준식과 약축 방향 내력을 산정하기 어려운 ACI 기준식보다는 바람직하다.