• 식물분류학회지
• /
• 제41권3호
• /
• pp.235-241
• /
• 2011

Five unrecorded species (Oedipodium griffithianum, Myurella tenerrima, Trachypus bicolor, Coscinodon humilis, Meteorium miquelianum subsp. atrovariegatum) with one unrecorded family and two unrecorded genera, were reported as new to the Korean moss flora. The monotypic family Oedipodiaceae consisting of a single genus and single species was distinguished from Splachnaceae by small plants that were 10 mm in length simple or sometimes branched, obovate-spathulate to ${\pm}$ orbicular, costa ending below the apex and entire margins except for the lower long-ciliate portion The species was first found at the top of the Mt. Seorak at an altitude of 1708 m. The two genera, Myurella and Coscinodon were found in the Korean Peninsula. Myurella tenerrima (Theliaceae) was found around the top of Jung-bong on Mt. Jiri. It was mixed with other mosses in the crevices of rocks in the alpine regions. The species is similar to M. sibirica, yet it can be distinguished by the position of papilla in the median laminal cells. Coscinodon humilis (Grimmiaceae) were found on the ridge of Mt. Gaya. C. humilis has a variety of hyaline apex according to leaf position and forms a capsule so it can be distinguished by family. Trachypus bicolor and Meteorium miquelianum subsp. atrovariegatum are unrecorded species. T. bicolor (Trachypodaceae) were found on the ridge of Mt. Gaya. T. bicolor is similar to T. humilis but distinguished by the costal lengths of the leaves. M. miquelianum subsp. atrovariegatum (Meteoriaceae) was found in Gageo-do. This species was distinguished by the plant form and morphology of stem leaves in the same genus.

• 한국지구과학회지
• /
• 제26권7호
• /
• pp.725-731
• /
• 2005

우리은하 속의 행성상성운들의 운동자료를 분석하여, 은하 회전의 운동학적 특성과 진화에 대한 단서를 제공한다. 우리는 THE STRASBOURG-ESO CATALOGUE OF GALACTIC PLANETARY NEBULAE에 주어진 자료 502개를 이용하여 행성상성운의 운동학적 특성을 분석하였다. 은경($\iota$)이 $0^{\circ},\;90^{\circ},\;180^{\circ},\;270^{\circ}$인 4방향과 태양의 향점과 배점의 총 6방향에 대한 특성적인 평균시선속도 $(V_r)s$를 구하였다. 행성상성운들은 향점에서 69.0 km/s로 태양에 접근하고, 배점$(56{\circ},\;236{\circ})$에서 64.1km/s로 멀어지고 있는 경향을 보였다. z 방향으로 행성상성운의 분포를 보면 은하면 아래쪽에 더 많이 분포하지만, 큰 차이는 보이지 않았다. 우리은하에 속한 천체 중 제 3세대인 행성상성운들의 회전속도 성분이 태양에 비해 상대적으로 느림을 알 수 있는데 이는 4세대 별인 태양이 제 3세대 별들과 조우할 수 있음을 암시한다.

• 동굴
• /
• 제68호
• /
• pp.5-22
• /
• 2005

Since earlier in 1947 the writer had been devoting part of his time to study alluvial fans in Korea based on his own interest in geomorphology. However, it was in 1958 when a new geography department was set up and the Research Center of National Lands was established in the university of Kyung Hee, the writer started scientific investigation for alluvial fans. The Following alluvial fans have been studied by the writer: those of Mt. Kwanak and Mt. Chungge in 1947; those of Pulkuksa in 1948; those of Suhnamsa, Suh Myun, Pusan in 1950; those of Shindonae, Mt. Kerrong, in summer of 1958; those of Hwaomsa, Kure and Yongsan Myun, Changhung, in winter of 1958. The article is the comparative study of the above mentioned alluvial fans including Suhkwangsa Fan, Chugaryng Rift Valley. Of course this is not the study covering all af alluvial fans in Korea. Within the limits of his surbey, the writer has com to a conclusion which may be helpful for the Korean alluvial fm study. 1. Korean alluvial fans are generally found in rift valleys or basins. 2. They are formed in places of below 220-meter contour line. 3. The slope from fna apex to river valley is 20-40 degree. The slope of fan surface is 5-20 degree, but most of them under 16 degree. A sudden change of slope is taken place or the fan apex and fan center. 4. Hills (100-200m) are developed on the surfaces of alluvial fans. 5. Most of rivers in alluvial fans are geyser rivers. 6. The depth of well : from ground surface to the well water surface is 4-8 m; water depth is 1-2m. 7. Land utilization; cultivated land 30%: non cultivatedland 70%. The area occupied by upland fields is twice of paddy field area. 8. Settlement : agglomerated settlement is developed on the top or the end of fan and surrounded by windbreakers. 9. Farming pattern at the top of fan fields are rectangular and parallel to flumes but at the center of fan, they are irregular and perpendicular to flumes.

• 대한두개안면성형외과학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2009

Purpose: This study presents a classification of pure medial and inferior blow-out fracture, and confirms the relationship between the types of fractures, postoperative complications and operative methods. Methods: Sixty patients were treated by transnasal endoscopic reduction with $Medpor^{(R)}$ implantation through subciliary incision and foley catheter insertion into maxillary sinus was done if there was extensive orbital floor fracture. Fractures were classified by number of coronal sections from posterior margin of fossa for lacrimal sac to orbital apex in CT. Type I is defined when the medial wall fracture is over 50% and inferior wall fracture below 50%. Type II, when below 50% medial wall fracture and over 50% floor fracture were present. If there were both over 50%, it was classified as Type III and both below 50% for Type IV. Extreme fracture involving orbital buttress was Type V and postoperative findings in all patients were examined. Results: Type I and V were most common and preoperative findings were more likely to present according to extent of inferior fracture. Diplopia remained in 2 cases after additional insertion of foley catheter, but enophthalmos over 2 mm were presented in 3 cases and diplopia in 3 cases were observed who were not treated with foley catheter. Conclusion: Postoperative complications were increased according to extent of fracture, especially buttress involvement. Additional insertion of foley catheter proved its effectiveness in decreasing postoperative complications.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.23-29
• /
• 1979

Roentgenographic film has to be handled with greatest care during removal from the packing, loading of the cassettes and loading of the hanger. In the case of prior to or after exposed film is handled with mechanical pressure in darkroom, the most common phenomena are desensitization or sensitization on roentgenographic film. In order to observe these defect occurring on, it, the author studied on change of the densities where the mechanical pressure reached to the roentgenographic film. 1. The optimal minimum and maximum densities in routine chest x-ray film are from 0.25 to 1.47 2. The dependence of the desensitization occurring on film upon the bent degree of film is in the portion to bent degree over $10^{\circ}$ 3. Appearances of the desensitization on film by the curved degree of film is inverse proportion to it's degree below intervals of 3cm. 4. The more unexposed film is bent with nail tip and is pressured with palm, the more desensitization it was appeared upon film size and pressure weight. 5. The most serious area of desensitization produced by many types of mechanical pressure is in the portion of lung apex and outside lung fields. 6. The tendency of desensitization due to mechanical pressure on unexposed film is more serious than sensitization on exposed film in the view of radiologic diagnosis.

• Korean Journal of Acupuncture
• /
• 제25권1호
• /
• pp.247-257
• /
• 2008

Objectives : The warm needling technique is the method in combining the effects of acupuncture needle with the effects of moxibustion. We need to standardize the characteristics of the warm needling technique in order to get more systematic and objective result in operation mechanism and effects and then get more clinical abilities in these fields. Methods : In this study, using of labview system on the warm needling technique we studied about measurement and comparison with partial temperature changes according to the position of ignition. Results & conclusion : When we measured the warm needling's partial temperature according to the position of ignition, the bottom ignition method got the higher result on the peak temperature measured at 2cm below the head than the apex ignition method.

• 대한장애인치과학회지
• /
• 제7권2호
• /
• pp.99-102
• /
• 2011

A-12year-old boy visited the clinic with chief complaint of anterior maxillary trauma. He was diagnosed with first degree mental retardation and cerebral disorders. By clinical and radiographic examination, intrusion of maxillary central incisors were found. The intrusion was not severe, teeth were luxated with a slight force and the prognosis was followed. After the first year, external root resorption was seen radiographically. Due to difficult behavior management, one visit root canal filling with OrthoMTA(BioMTA, Korea) which is known to generate of cementum and periodontal ligament was planned along with general anesthesia. OrthoMTA was filled from the apex to 1-2mm below cervical area and composite resin used for crown restoration. 6 months after, further resorption, discoloration and mobility was not found. This case is currently checked yearly and further research is needed for inflammatory root resorption and ankylosis.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.305-311
• /
• 2014

목적: 다양한 원인으로 발생된 Abfraction 병소가 있는 치아를 금속도재관으로 수복 할 경우, 변연의 위치에 따라 예후가 다양해질 수 있다. 수복물의 장기적 성공을 검증하기 위해서는 응력분포의 분석이 필요하지만 금속도재관이 abfraction 병소의 적응증인 경우 금속도재관이 응력 분포에 미치는 영향을 밝히는 연구는 아직 없다. 본 연구의 목적은 abfraction 병소가 있는 치아를 수복하는 금속도재관이 바람직한 응력 분포를 나타낼 수 있는 조건을 알아 보고자 함이다. 재료 및 방법: 치아, 주위 조직과 금속 도재관의 외형을 반영한 2차원 유한 요소모델을 제작하고 144 N의 편심 교합력 하에서의 응력분포를 유한요소 분석법으로 분석하였다. 금속 도재관의 변연 위치를 쐐기모양의 결손부의 하연에(Group 0), 그리고 결손부의 하연보다 1 mm 하방(Group 1)과 2mm 하방(Group2)에 위치시켰다. 결과: Group 0에서 von Mises stress는 금속 도재관의 변연과 결손부의 첨부에 집중 되었고 협측 변연의 응력은 설측 부위로 분포되었다. Group 1과 Group 2에서의 응력분포양상은 비슷하게 나타났다. 응력은 결손부의 첨부에 집중되지만 협측과 설측의 응력띠는 서로 분리된 양상으로 나타났다. 결론: 금속도재관의 변연을 Abfraction 병소의 하연에 설정할 경우, 금속도재관은 Abfraction 병소의 첨부에 응력을 집중시킨다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• Journal of Periodontal and Implant Science
• /
• 제28권4호
• /
• pp.785-797
• /
• 1998

This study has been done to prove that keratinized gingiva is required for the periodontal health and to analyse the adequate width that is necessary. Until now, the study on frenum has been documented on changing its location. But the location or the formation of the frenum has not been reported. This experiment has used 173 patients from the department of periodontology of Dankook University to investigate the width of keratinized gingiva, the formation of the frenum and its location for the frequency. This study also looks into the relationship between the gingival recession and the structure of the frenum, and affects they have on periodontal health. The width of the keratinized gingiva in the mandible has been found to be highest in the lateral incisor than in the central incisor. The width decreased from the canine to the first premolar until it reached the molar. The interproximal area of the mandibular frenum was 77.9%, which was greater than the frequency (22.1%) from the midline of the teeth. The highest frequency of frenum was at 30.6% in between the both central incisor then second greatest at 20.6% in between the right canine and the right first premolar. Frenum was not found in between the second premolar and the distal area. In the morphology of the frenum, it was found that 43.4% out of 551 parts were found to be a single narrow frenum, and the double or triple ligamented form of the complex frenum were found in similar frequency of 237 parts, but the broad frenum was rarely frequent. The incisal area was popular mostly with the single narrow frenum, the left premolar area frequented 57.4%, and the right premolar frequented 64.7%. Because the distance between the frenum apex and the gingival margin measured to be about 5mm or greater, the frenum apex started in the mucogingival junction and not just below the keratinized gingiva. In the 551 area investigated, 48.3% of gingiva showed recession, incisal area had recession the least at 44.9%, right buccal side at 47.4%, and right buccal side frequented the highest at 52.1%. The teeth that showed recession recessed at the average of 2.151.0.mm and the left canine showed the greatest amount of gingival recession. In the investigation to find out if the keratinized gingiva and the gingiva recession had mutually related somehow, the width of keratinized gingiva showed no affect on the probing depth, but had affected in the gingiva recession. This investigation showed that the gingival recession and the morphology of the frenum related in that, the single narrow frenum had recessed the least and the broad frenum recessed the most. With this analysis, a conclusion was drawn that the morphology of the frenum had affected in the gingical recession.