• 한국진공학회지
• /
• 제15권5호
• /
• pp.518-526
• /
• 2006

나노 다공성 알루미나 박막을 제작하고 이를 주형으로 사용해서 진공증착에 의해 규칙적으로 배열된 나노우물구조와 나노그물구조의 금속 박막들(알루미늄, 주석, 코발트)을 제작하였다. 원하는 금속물질을 증발시키기 위하여 저항가열 방법을 사용하였으며, 증착은 torr의 기저진공 속에서 수행되었다. 실험결과에 의하면, 나노우물과 나노그물 구조의 박막 중 어떤 구조가 합성되느냐 하는 것은 증착되는 물질의 양에 의해서 큰 영향을 받는다는 사실을 알 수 있었다. 세포의 크기가 100 nm이고 세공 직경이 60 nm인 다공성 알루미나 박막을 사용했을 때는 대략 우물구조를 합성하는데 필요한 질량의 절반이하 정도가 증착되게 되면 그물 구조가 합성되는 경향을 보여주었다.

• 한국발생생물학회지:발생과생식
• /
• 제18권3호
• /
• pp.127-131
• /
• 2014

We investigated the androgenic effects of $17{\alpha}$-methyltestosterone (MT) on gonadal sex reversal in juvenile red spotted grouper Epinephelus akaara. The fish were immersed in $17{\alpha}$-MT at 1 and 5 mg/L. Treatment method of $17{\alpha}$-MT was once weekly for 4 and 8 weeks. Fish were sampled at 12 months after end of the treatment period in order to histological analysis. At the initiation of an experiment (70 day after hatching), juvenile red spotted grouper have the paired primordial gonads with somatic cells bellow kidney in the posterior portion of the body cavity. Formation of ovarian cavity indicates that the ovarian differentiation beginning at 70 DAH in red spotted grouper. At 12 months after end of the treatment period, control group, $17{\alpha}$-MT 1 mg/L treatment group for 4 and 8 weeks, and $17{\alpha}$-MT 5 mg/L treatment group for 4 weeks were all female. However, sex-changed males without ovarian cavity were observed in the $17{\alpha}$-MT 5 mg/L treatment group for 8 weeks. In grouper, we firstly reported that the red spotted grouper be able to induce the primary males by hormone treatment prior to gonadal sex differentiation.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.263-272
• /
• 2003

내진상세가 적용되지 않은 RC중공구형단면 교각의 지진 시 거동특성 및 내진성능을 파악하기 위하여 축소모델 실험을 수행하였다. 축소모델은 교각의 소성힌지영역내에 동일한 위치에서 모든 주철근이 겹침이음된 모델과 연속된 철근을 사용하여 겹침이음을 없앤 모델로 설계하였다. 실험은 축력이 재하된 상태에서 준정적 반복하중을 재하하였다. 실험결과 겸침이음모델은 주철근의 겹침이음부에서의 부착파괴가 발생하였지만 비교적 큰 연성거동을 나타냈으며 연속철근을 사용한 모델은 전형적인 휨파괴 특성과 매우 큰 연성거동을 보였다.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.375-386
• /
• 2018

Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, where the grouped headed studs are placed in the deck pockets is alternative to cast-in-place decks to accomplish fast execution of composite structures. This paper considers the possibility to reduce the distance between the studs within the group, bellow the Eurocode limitations. This may lead to increased competitiveness of the prefabricated construction because more studs are placed in the group if negative effectives of smaller distances between studs are limited. The main purpose of this work is to investigate these limits and propose an analytical calculation model for prediction of the shear resistance of grouped stud arrangements in the deck pockets. An advanced FEA model, validated by results of push-out experiments, is used to analyze the shear behavior of the grouped stud with smaller distance between them than recommended by EN 1994-1. Calculation model for shear resistance, which is consistent with the existing Eurocode rules, is proposed based on a newly introduced equivalent diameter of the stud group, $d_G$. The new calculation model is validated by comparison to the results of FE parametric study. The distance between the studs in the longitudinal direction and the number of stud rows and columns in the group are considered as the main variables.

• 한국산림과학회지
• /
• 제17권1호
• /
• pp.23-28
• /
• 1973

본시험(本試驗)은 리기다소나무 임분(林分)의 재적성장량(材積成長量)을 추정(推定)하기 위(爲)하여 예비적(豫備的)으로 직경성장량(直徑成長量)을 추정(推定)한 것이다. 표준목(標準木) 223본(本)중 기각목(棄却木)은 전체(全體) 본수(本數)의 약(約) 5%인 12본(本)으로 대체적으로 일률적(一律的)인 성장(成長)을 하고있으며 기각목(棄却木)은 병충해목(病蟲害木)이 이에 속(屬)하고 있으며 임상별(林相別)로 기(旣) 조사발표(調査發表)된 것과 비교(比較)할 때에 단일수종(單一樹種)인 리기다소나무 임분(林分)의 성장(成長)이 가장 좋았다. 직경(x)과 직경성장량(y)과의 관계(關係)를 보면 다음과 같다. y=0.1618+0.0298x 단(但) r=0.9886이다. 리기다소나무 16년생임분(年生林分)의 D.B.H와 평균연년(平均連年) 직경성장량(直徑成長量)의 최소(最少), 평균(平均) 및 최대치(最大値)는 다음과 같다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권7호
• /
• pp.587-592
• /
• 2016

LNG 선박용 벨로우즈는 극한의 환경에서 지속적인 진동 그리고 큰 온도변화에 따른 수축과 팽창을 견뎌내야 하는 피로수명과 해수환경에서의 내식성을 가져야 한다. 이러한 특성을 갖기 위해서는 저온에서의 인성이 강하고 내부식성이 강한 재료를 사용하여 최적화된 성형조건을 유지하는 것이 매우 중요하다. 이를 위해서는 벨로우즈의 최적화된 설계 조건과 성형방법이 뒷받침되어야 한다. 본 연구에서는 기계적 강성과 신뢰성이 높은 극저온용 벨로우즈를 개발하기 위하여 유한요소 해석을 통해 벨로우즈를 설계하였다. 또한 두 가지의 성형방법을 통해 설계된 벨로우즈를 제작하여 최적화된 성형조건을 도출하고자 하였다. 기계식 성형방법과 하이드로포밍 방법을 통해 벨로우즈를 성형하고 성형방법에 따른 벨로우즈의 기계적 특성을 비교하기 위하여 성형부의 높이, 두께 및 비커스 경도 값을 측정하였다. 이를 통해 기계식 성형방법으로 제작된 벨로우즈의 경도 값이 하이드로포밍 제작 벨로우즈보다 더 높은 것을 확인하였다.

• 대한수의학회지
• /
• 제56권4호
• /
• pp.233-239
• /
• 2016

This study was conducted to analyze penicillin G (PEG), streptomycin (STR) and neomycin (NEO) residues in milk of healthy lactating cows. Milk samples were collected from all four quarters of 12 dairy cows 2−7 days after intramammary infusions of an ointment containing PEG, STR and NEO once (n = 4; group I) or twice (n = 4, group II) daily. Ultra-performance liquid chromatography coupled with electrospray tandem mass spectrometry was used to determine the antibiotic residues in the samples. The correlation coefficient ($r^2$) of the calibration curves for all antibiotics was > 0.999 and the limits of detection and quantification were $0.002-0.005{\mu}g/mL$ and $0.007-0.02{\mu}g/mL$, respectively. Recovery rates were ranged from 75.5 to 92.3%. In group I, PEG, STR and NEO residues were detected in milk at 2, 3 and 2 days post-treatment, respectively, which were below the maximum residue limit (MRL). In group II, PEG, STR and NEO residues were detected in milk at 2, 3 and 3 days post-treatment, respectively, which were bellow the MRL. These results suggest that a 3-day for milk withdrawal period after the ointment treatment might be sufficient for reduction of the antibiotic residues below the MRL.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.355-356
• /
• 2009

The change of thermal expansion and mechanical behaviors by cold working has been investigated in Fe-29%Ni-17%Co low thermal expansion Kovar alloy. Fe-29%Ni-17%Co alloy was cold rolled gradually and prepared to plates having reduction ratio of 0%, 20%, 40%, 60%, and 80%. Annealing effect on the properties was also studied. Thermal expansion was measured from $25^{\circ}C$ to $600^{\circ}C$ with a heating rate of $5^{\circ}C$/min by using vacuum differential dilatometer. It was found that thermal expansion coefficient ($\alpha_{30{\sim}400}$) slightly decreased (reduction ration of 20%) and then remarkably increased (above reduction ration of 40%) with increasing reduction ratio of cold rolling. Thermal expansion coefficient ($\alpha_{30{\sim}400}$) was sharply decreased after annealing heat-treatment. Yield and tensile strengths were continuously increased and elongation was decreased by cold roiling. Microstructural observation and X-ray diffraction analysis results showed that the $\alpha$ phase significantly increased as the reduction ratio increased. The slight decrease of thermal expansion coefficient bellow reduction ration of 20% could be explained by the destroying short-range ordering and the decreasing of grain size. The significant increase of thermal expansion coefficient with cold rolling mainly attributed to the appearance of $\alpha$ phase. The correlation between the microstructural cause and invar phenomena for the low thermal expansion behavior was also discussed.

• 무역상무연구
• /
• 제72권
• /
• pp.185-210
• /
• 2016

The climate change has become one of the most important global issues that require global responses. As one of the leading contributions to climate change, greenhouse gas emissions and Ballast Water Management have attracted growing attention from the international community. The International Maritime Organization (IMO) received its mandate to regulate International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004. The convention requires that every vessel must be equipped Ballast Water Management System (BWMS) in 2017. Based on this situation, this study aims to analyze the present state and data from the exports of BWMS(HS842121). The results show that as the most leading country in the field, Germany has the largest market share (14.33%), Revealed Comparative Advantage (RCA) index 1.76, and Trade Specialization Index (TSI) 0.636 in the world. The two other leading countries such as Denmark and Netherlands follows the ability of Germany. The Korean market share of HS842121 shows market share (5.98%) which is a bit bellow high compared to other countries. However the RCA index (1.85) presents the state of comparative advantage. In addition, Korea's TSI index (0.453) indicates that it is in the state of export specialization. The Korean BWMS and Shipbuilding industry maintain the state of export specialization. They are also in the state of import specialty. For Korea to raise its export competitiveness and to ensure shipbuilding competitiveness, it is necessary to intensify supporting systems and related policies.

• 한국식품과학회지
• /
• 제8권4호
• /
• pp.263-272
• /
• 1976

According to the intercombined review of chemical and biological investigation it has been noted that the metabolizable energy per gram dietary protein of mixed diet of daily intake patterned by Korean population has been found 3.4-3.6 Cal., which entails 10-12% level of the protein calorie percentage of total metabolizable energy, the biological value being fallen within the scope 63-73. The structure of dietary protein has revealed that the lysine and isoleucine were primary limiting amino acids and threonine secondary limiting as a general trend, however, it is assumed that the ultimate nutritional effect of dietary protein might be restricted uniformly among regions by the amount of lysine, since the lysine availability has been yielded as low as 72-82% level. As for the net protein utillization NPUst falls in the range of 52-62 and the NPUop 47-58. In either part the mountainous region has demonstrated lowest value and the urban area highest, these trend being obviously associated with the ratio of animal protein relative to the vegetable origin. The net dietary protein calorie percentage (NDpCal %) has been found within the range of 5-7 that may be capable of meeting the requirement for the maintenance of adult, though for the growth it is insufficient. Present level of total caloric intake would not influence on the fate of protein value of prevailing regional diet in terms of caloric restriction, since the present intake of food energy is higher than the lower limit of caloric intake that would impair the biological performance of dietary protein fed ad libitum basis. Based on the protein efficiency, the adequacy of current level of protein intake was analyzed in terms of utilizable protein, and it has been demonstrated that the 37.8g of utilizable protein in the fishery region and 38.2g in the mountainous region were bellow the FAO recommendation. Accordin to the hematological study it may be interpreted that the anemic symptoms of the mountainous region has some possibility of being related to the inferior status of dietary protein in quality as well as in quantity.