• Computers and Concrete
• /
• v.33 no.5
• /
• pp.497-507
• /
• 2024

In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

• Sim-seong Yeon-gu
• /
• v.30 no.1
• /
• pp.1-30
• /
• 2015

The Red Book contains C.G. Jung's insightful comment on life suggesting the thoughts of the Eastern philosophers, particularly that of Lao Zi. The author reviewed Jung's commentaries in the Red Book in comparison with Lao Zi Dao De Jing. Jung's comments on the image of despised Surpreme Being, on the Simplicity, the attitudes of 'the Spirit of the Depth' toward intellectual knowledges and speech, toward the small and the mockered one resemble to what Lao Zi spoke on Dao in his Dao De Jing. The 'good and evil' are regarded by both C.G. Jung and Lao Zi as two poles in one total psyche. The favorite words of Lao Zi : 'emptiness' or 'empty' are frequently mentioned in the Red Book. The investigation in this concern revealed that C.G. Jung, contrary to Lao Zi has applied the word 'emptiness' mostly as the opposite to the fullness. C.G. Jung's way of encountering with the darkest side of soul in the Hell and his bold confrontation to the authoritative person such as Philemon, above all, the intensity of his experiences in the state of the utmost tension between the opposites are extraordinarily impressive and somehow strange when regarded from traditional eastern way of behavior such as I-You relationship and the patterns of emotional life based on Confucian tradition. Confucius never talked about the prodigies, feasts of strength and disorders or spirits. Lao Zi never mentioned infernal cruelty. Noteworthy is however, both have enough experienced the cruelty of life and conflicts in the reality and what they spoke was not a process in search for solution but the final proposals for the solution of human agony. C.G. Jung was, like great shaman in central and East-Asia forced to go through inferno in his unique way and from these experiences obtained the insight which resembles not only to Lao Zi but also to wisdoms from the western philosophies and also from the Christianity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.103-110
• /
• 2024

In this study, a nonlinear dynamic analysis of a frame and single member, which reflect the characteristics of a plant facility, is performed using the commercial MIDAS GEN program and the results are analyzed. The general structural members and material properties of the plant are considered. The Newmark average-acceleration numerical-analysis method is applied to a plastic hinge to study material nonlinearity. The blast load of a vapor-cloud explosion, a representative plant explosion, is calculated, and nonlinear dynamic analysis is conducted on a frame and single member. The observed dynamic behavior is organized according to the ratio of natural period to load duration, maximum displacement, ductility, and rotation angle. The conditions and range under which the frame functions as a single member are analyzed and derived. NSFF with a beam-column stiffness ratio of 0.5 and ductility of 2.0 or more can be simplified and analyzed as FFC, whereas NSPF with a beam-column stiffness ratio of 0.5 and ductility of 1.5 or more can be simplified and analyzed as FPC. The results of this study can serve as guidelines for the blast-resistant design of plant facilities.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.66-72
• /
• 2024

In this study, the applicability of CCMs (Carbondioxide conversion capture materials) manufactured by reacting carbon dioxide gas with DG (Desulfurization gypsum) as a cement substitute for secondary concrete products were evaluated and the basic physical properties of CCMs-mixed mortar and concrete specimens were measured to derive the optimal mixing ratio. The main chemical oxides of CCMs were CaO and SO₃, and the main crystalline phases were CaSO₄·2H₂O, Ca(OH)₂, CaCO₃, and CaSO₄. In addition, by the results of particle size analysis and heavy metal measurement, the applicability of CCMs as a cement substitute for secondary concrete products was confirmed. As a result of measuring the strength behavior using mortar and concrete specimens with CCMs, the compressive and flexural strength decreased as the mix ratio of CCMs increased, but requirements by the standards for interlocking blocks and retaining wall blocks, which are target products in this study, were satisfied up to the optimal mixing ratio of 10 wt.% substitution. Therefore, its applicability as a cement substitute for secondary concrete products was confirmed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.109-116
• /
• 2024

The Rapid Hardening Composite Mat (RHCM) is a product that improves the initial strength development speed of conventional Geosynthetic Cementitious Composite Mats (GCCM). It offers the advantage of quickly securing sufficient strength in railway slopes with insufficient formation level, and provides benefits such as preventing slope erosion and inhibiting vegetation growth. In this study, an analysis of the practical applicability of RHCM in railway settings was conducted through experimentation. The on-site applicability was assessed by categorizing it into fire resistance, durability, and stability, and conducting combustibility test, ground contact pressure test, and daily displacement analyses. In the case of South Korea, where a significant portion of the territory is composed of forested areas, the prevention of slope fires is imperative. To analyze the fire resistance of RHCM, combustibility tests were conducted as an essential measure. Durability was assessed through ground contact pressure tests to analyze the deformation and potential damage of RHCM caused by the inevitable use of small to medium-sized equipment on the construction surface. Furthermore, daily displacement analysis was conducted to evaluate the structural stability by comparing and analyzing the displacement and behavior occurring during the application of RHCM with railway slope maintenance criteria. As a result of the experiments, the RHCM was analyzed to meet the criteria for heat release rate and gas toxicity. Furthermore, the ground contact pressure was observed to be consistently above 50 kPa during the curing period of 4 to 24 hours under all conditions. Additionally, the daily displacement analyzed through field site experiments ranged from -1.7 mm to 1.01 mm, confirming compliance with the criteria.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.117-134
• /
• 2024

This study examines the factors contributing to waterfront satisfaction among different generations, utilizing a survey on the use and perception of waterfront areas by residents of apartment houses in Tokyo's coastal region. The variables used in this study are developed through a review of existing literature, focusing on factors related to waterfront usage. Specifically, we select the proximity to the waterfront, duration of stay at the waterfront, and frequency of visits to the waterfront as key variables for investigation. In addition, the study further incorporates aspects related to waterfront recognition, such as the space, user behavior, and management status of the waterfront. Utilizing these variables, we carry out a correlation analysis to investigate the association between generational use and perception of the waterfront and their satisfaction with water-related experiences. The results identify three key factors to enhance waterfront satisfaction: First, to increase visits from both younger and older generations, improving pedestrian access to the waterfront is essential. Second, for middle-aged and older generations, creating waterfront areas closer to their residences can reduce travel distance and time, encouraging more frequent use. Third, maintaining clean and well-kept waterfront spaces is fundamental for all generations to enjoy relaxing experiences, thereby improving overall satisfaction.

• Korean Journal of Culture and Social Issue
• /
• v.30 no.2
• /
• pp.193-220
• /
• 2024

This study was conducted by applying Selby and Joiner (2009)'s Emotional Cascade Model to the phenomenon of non-suicidal self-injury of adolescents, focusing on the school counselor's counseling experience. To this end, a focus group interview(FGI) was conducted with 56 counselors who had experience in counseling self-injured adolescents, and this study applied Braun and Clake's thematic analysis(2012). As a result, 8 categories and 16 subtopics were derived: 'negative emotional experience', 'maladaptive cognitive emotional dysregulation strategy', 'experience of emotional cascade', 'temporary relief of psychological pain', 'aggravation of the emotional cascade state', 'emotional pain from nonsuicidal self-injury', 'vicious cycle of nonsuicidal self-injury' and 'difficulty in controlling behavior that co-occurs with nonsuicidal self-injury'. These results are significant in expanding the understanding regarding the non-suicidal self-injury of adolescents through the perspective of school counselors who are in a position to consider the various systems surrounding adolescents in an integrated manner. Based on the research results, implications, limitations and future research were discussed.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.3
• /
• pp.288-297
• /
• 2024

Objectives: This study explored the prevalence and predictors of alcohol and cannabis co-use among 9263 Filipino adolescents, using data from the 2019 Global School-based Student Health Survey (GSHS). Methods: We conducted a cross-sectional secondary analysis of the GSHS, targeting adolescents aged 13-17 years and excluding cases with incomplete data on alcohol and cannabis use. Our analysis employed the bivariate chi-square test of independence and multivariable logistic regression using Stata version 18 to identify significant predictors of co-use, with a p-value threshold set at 0.05. Results: The weighted prevalence of co-users was 4.2% (95% confidence interval [CI], 3.4 to 5.3). Significant predictors included male sex (adjusted odds ratio [aOR], 4.50; 95% CI, 3.31 to 6.10; p<0.001) and being in a lower academic year, specifically grade 7 (aOR, 4.08; 95% CI, 2.39 to 6.99; p<0.001) and grade 8 (aOR, 2.20; 95% CI, 1.30 to 3.72; p=0.003). Poor sleep quality was also a significant predictor (aOR, 1.77; 95% CI, 1.29 to 2.44; p<0.001), as was a history of attempted suicide (aOR, 5.31; 95% CI, 4.00 to 7.06; p<0.001). Physical inactivity was associated with lower odds of co-use (aOR, 0.45; 95% CI, 0.33 to 0.62; p<0.001). Additionally, non-attendance of physical education classes (aOR, 1.48; 95% CI, 1.06 to 2.05; p=0.021), infrequent unapproved parental checks (aOR, 1.37; 95% CI, 1.04 to 1.80; p=0.024), and lower parental awareness of free-time activities (aOR, 0.63; 95% CI, 0.45 to 0.87; p=0.005) were associated with higher odds of co-use. Factors not significantly linked to co-use included age group, being in grade 9, always feeling lonely, having no close friends, being bullied outside school, and whether a parent or guardian understood the adolescent's worries. Conclusions: The findings highlight the critical need for comprehensive interventions in the Philippines, addressing not only physical inactivity and parental monitoring but also focusing on sex, academic grade, participation in physical education classes, sleep quality, and suicide attempt history, to effectively reduce alcohol and cannabis co-use among adolescents.

• Journal of Industrial Convergence
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2024

The study aim was to investigate the relationship between adolescents' physical activity and subjective health perceptions and determine whether body mass index (BMI), an obesity-related indicator, had a mediating or moderating effect on this relationship. To achieve the purpose of this study, raw data from the 18th Youth Health Behavior Online Survey (2022) were used, and data from 23,612 people were ultimately selected for the research analysis. A confirmatory factor analysis and structural equation modeling were applied to the data, and bootstrapping techniques were used to verify the mediating effect. To verify the moderating effect, a multigroup analysis of the structural equation model was applied to calculate pairwise parameter comparison values. All statistical significance levels were set at .05. The results of this study follow. First, the greater the amount of physical activity among adolescents, the more positive was the effect on subjective health perception. Second, subjective body type perception had a partial mediating effect on the relationship between physical activity and subjective health perception. Third, subjective body type had a moderating effect on physical activity and subjective health perception. Specifically, people who perceived their subjective body types as average viewed their subjective health more positively when they engaged in more physical activity than those who perceived their body types as slightly or very overweight. In conclusion, preventing obesity and positively changing the subjective health status through sufficient physical activity during adolescence are important.

• Knowledge Management Research
• /
• v.24 no.4
• /
• pp.87-102
• /
• 2023

Awe is recognized as an emotion linked to enhancing openness to new experiences and broadening one's cognitive perspective through the acquisition of new knowledge. This research aimed to investigate awe's impact on consumer behavior in advertising, using a 2 (emotion: awe/control) × 2 (product type: innovative/non-innovative) experimental design with 118 undergraduate students in Seoul, Korea. Findings revealed that awe-inducing advertising significantly increases product preference and positive technology readiness, particularly for innovative products compared to non-innovative ones or when awe is not elicited. The analysis of moderated mediation showed that positive technology readiness plays a mediating role in the relationship between awe induction and product preference. Notably, in the case of innovative products, awe-inducing advertising heightens positive technology readiness, subsequently increasing consumer preference for these products. These results reinforce existing literature on awe's positive effects, demonstrating its role in augmenting consumers' favorable attitudes toward innovative products. The study offers valuable insights for marketing strategies of companies promoting innovative products or services, highlighting the effectiveness of awe-inducing emotional appeals in shaping consumer attitudes towards innovation.