• 한국환경과학회지
• /
• 제24권2호
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 1996년도 국제심포지움 21세기 첨단식물생산시스템의 실용화
• /
• pp.91-115
• /
• 1996

최근 우리나라 농업은 계속되는 농촌노동력의 감소 및 노령화ㆍ부녀화와 WTO체제 출범에 따른 농축산물 수입개방 둥 대내외적으로 매우 어려운 처지에 놓여있다. 이러한 농업여건변화에 따라 우리농업을 경쟁력 있는 강한 체질의 산업으로 육성하여 국제경쟁력을 키우고 국민소득 증대에 따른 고품질 농축산물 수요증가에 적절히 대응하기 위하여 품질이 좋은 농축산물을 값싸게 생산 공급할 수 있는 자본기술집약적 농업의 필요성이 점차 높아지고 있다. (중략)

• 대한환경공학회지
• /
• 제39권3호
• /
• pp.155-163
• /
• 2017

최근 막여과 공정은 입자상 물질뿐만 아니라 Giardia, cryptosporidium과 같은 병원성미생물이 효과적으로 제거됨에 따라 국내외 적용성이 확대되는 추세이다. 본 연구는 광주광역시 D정수장의 원수 침전상등수의 처리를 위해 $120m^3/d$ 처리규모의 Pilot Plant (2014. 1월부터 운영)와 $2,500m^3/d$ 처리규모의 실증실험시설(2015. 1월부터 운영)의 막여과 공정을 운영하면서 최적 운전조건과 한계여과속도를 찾고자 하였다. 정밀여과막의 Pilot-test에서 얻어진 운전모드는 유입 1.0분, 여과 36.5분, 공기역세 0.9분, 역세 1.0분, 배출 1.0분이었으며, 이를 적용하여 실증실험을 하였다. 한계여과속도(critical flux)는 Pilot 운전에서 Flux 20, 40, 56 및 62 LMH일 때의 시간의 변화에 따른 막간차압의 증가식을 기반으로 $50L/m^2-h$로 산정(TMP 0.5bar 이내)되었다. 화학세정은 1차로 산세정 2회, 2차로 알칼리 세정을 하여 95%의 회복율을 얻었다. 이러한 적정 조건으로 운전한 결과 처리수의 탁도는 봄 여름 가을 겨울 평균 각각 0.028, 0.024, 0.026 및 0.028 NTU, 연평균 탁도는 0.026 NTU로, 탁도 제거율은 98.4%로 나타났다. 광주광역시 D정수장의 원수 침전상등수를 1일 $2,500m^3$ 처리하는 실증실험시설 운영을 통해 부유고형물 및 콜로이드성 물질을 제거하는데 탁월한 처리성능을 확인하였고, 일반적인 모래여과공정을 대체할 수 있는 적정운영기술이 확보되었다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Journal of Ginseng Research
• /
• 제4권1호
• /
• pp.65-71
• /
• 1980

Twin-bud seedlings and four-leaflet seedlings of ginseng were found and transplanted to field and their growth characteristics were investigated. 1. Appearance frequencies of twin-bud and four-leaflet seedlings were 0.3 and 0.4 percent, respectively, in common nursery bed: and were 6.6 and 28.4 percent, respectively, in polystem line. 2. Generally, the growth of twin.bud and four-leaflet seedlings were better than those of common seedlings both in aerial part and in root. Root weights of both type seedlings exceeded the common ones by 66 and 38 percent, respectively. 3. When they became two-year-old plants, leafiet number of common plant was 11.6, and those of twin-bud and four-leaflet-seedling plants were 18.1 and 13.8, respectively. There were no inflorescence in twin-bud-seedling plant, but the ratios of in florescent Plant in four-leaflet.seedling and common plant were 44.0 and 12.5 percent, respectively. 4. In two-year-old plant, root weights of twin-bud and four-leaflet-seedling plants were heavier than those of common ones by 27 and 20 percent, respectively.

• 상하수도학회지
• /
• 제26권2호
• /
• pp.265-273
• /
• 2012

Anaerobic sewage treatment is drawing attentions due to high energy consumptions and sludge production associated with aerobic treatment. This study evaluates the treatment characteristics and energy balance of a fluidized bed reactor (FBR) for treating domestic sewage at $20^{\circ}C{\sim}25^{\circ}C$ for 245 days. Sewage fed to the FBR was a primary clarifier effluent of a domestic sewage treatment plant with COD of 99-301 mg/L and $BOD_{5}$ of 37-149 mg/L. Effluent $SBOD_{5}$ and its removal efficiency at HRT of 1~3 h were 6~15 mg/L and 73.4~85.5%, respectively, achieving high removal efficiency for soluble organic substances even at short HRTs. COD removal efficiency and its effluent concentration were 53.8~75.9% and 51~83 mg/L, respectively. The energy production potential from gaseous methane was 0.009-0.028 kWh/$m^{3}$, which satisfies the energy required for the FBR operation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권6호
• /
• pp.475-482
• /
• 1999

The electrostatic precipitation characteristics of two kinds of fly ashes, one derived from a fluidized bed combustor(FBC), the other from a pulverized coal(PC) fired furnace, have been studied on a pilot plant. Experiments have been carried out to enhance the collection efficiency while changing the operating conditions for two kinds of coal ashes, respectively. It has been shown that collection efficiency is affected by many factors such as shape of the ashes, dust contents, humidity, and temperature, etc. Experimantal results showed that collection efficiency of the FBC ashes was higher than that of the PC fly ash in spite of the small size of the FBC ashes. The experimetal results have been applied to the collection efficiency equations to show that the modified Deutsch equation was well agreed with experiment results if modification parameter k was set to 0.6 for the fluidized bed fly ashes and to 0.43 for the pulverized coal fly ashes.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• 해양환경안전학회지
• /
• 제22권7호
• /
• pp.814-820
• /
• 2016

산업부산물인 석탄회을 이용하여 잘피군락의 조성 가능성을 평가하기 위한 현장실험을 실시하였다. 오염된 점토질 해저면에 석탄회 조립물을 이용하여 인공지반을 조성하고 잘피를 이식한 후 모니터링을 실시하였다. 이식된 잘피는 조성된 지반에서 성공적으로 정착하였으며, 이식 후 24개월 이후부터는 이식된 잘피의 개체길이의 증가 및 영양번식을 통한 잘피의 밀도의 빠른 증가가 확인 되었다. 또한 조성된 잘피군락 및 그 주변에서 저서생물 및 미세조류의 종수가 증가하여 자연잘피군락과 동일하게 연안역의 생물다양성 향상에 도움이 되는 것을 확인할 수 있었다. 이상의 결과로부터 석탄회 조립물은 잘피군락 조성에 적합한 재료임을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제38권4호
• /
• pp.383-390
• /
• 2006

Having its roots in medical applications, industrial gamma ray CT has opened up new roads far investigating and modeling industrial processes. Using a line of research related to industrial gamma ray CT, the authors set up a system of single source and detector gamma transmission tomography for wood timber and a packed bed phantom. The hardware of the CT system consists of two servo motors, a data logger, a computer, a radiation source and a radiation detector. One motor simultaneously moves the source and the detector for a parallel beam scanning, whereas the other motor rotates the scan table at a preset projection angle. The image is reconstructed from the measured projections by the filtered back projection method. The phantom was designed to simulate a cross section of a packed bed with a void. The radiation source was 20mCi of Cs-137 and the detector was a 1 inch $\times$ 1 inch NaI (TI) scintillator shielded by a lead collimator. The experimental gamma ray CT image has sufficient resolution to reveal air holes and the density distribution inside the phantom. The system could possibly be applied to a packed bed column or a pipe flow in a petrochemical plant.