• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.165-172
• /
• 2004

Co-incineration of coal and wastewater sludge was r;erfonn:rl in a O.lMWth bench scale circulating fluidized bed combustor(CFBC) Sludge was received from a wastewater treatment plant in a dye industrial complex in Busan. Metropolis. Moisture content of received sludge was 80%. Coal and sludge mixture was prepared with weight ratio of 90/10, 85/15 and 80/20. Co-combustion characteristics of the coal and sludge mixture demonstrated stable combustion conditions. Component analysis, incineration characteristics, boiler performance was measured before and after the test and application for commercial 59MWth CFBC boiler. The release of hazardous components such as $SO_2$ and Cl was suppressed by the presence of inherent minerals of Ca, Na, K in coal and sludge mixture. Pre-drying was not essential but it was recommended for the benefits of manageability of sludge.

• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.153-159
• /
• 2019

In this study, fly ash of a fluidized bed boiler produced in a power plant was stabilized by hydration and carbonation reaction. Then, each raw material was pulverized by two kinds of grinding equipment (Planetary mills and pot mills); the degree of grinding and the agglomeration behavior were observed. It was found that there were changes of specific surface area and particle size distribution according to grinding time. The surface of the raw material was observed using an optical microscope. As a result, agglomerates of about 75 ㎛ or more due to electrostatic phenomenon were formed as the grinding time became longer; it was confirmed that the crushing efficiency slightly increased with use of antistatic agent.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.139-148
• /
• 1993

The present experiments have been conducted to find out the plant's growth environments habitate, mode of life, characteristic of photosynthesis, habit of growth and propagation. The results of this study are as follows: 1. Sambucus williamsii var. Coreana distributes around all sides of native site without having any relation to altitude, inclination and direction. 2. In the native site, Robinia pseudo - acacia and its neighboring species were Prunus yedoensis, Acer pseudo-sieboldianum, Lindera obtusiloba and Staphylea bumalda. From 21 to 41 types of species were located in the vegetation of the quadrat area. 3. According to the variation of leaf temperature with the result of the change of net photosynthetic rate, the optimum temperature for growth is $25^{\circ}C$. 4. The rooted rate of vegetative propagation was the highest at 100ppm IBA plot and the lowest at 200ppm BA plot. 5. The rooted rates of Sambucus williamsii var. coreana in perlite 50% bed, vermiculite bed and peatmoss 50%+sand 50% bed are higher than others.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.192-196
• /
• 2005

Chromatography has been a method of choice in the separation of complex biological mixtures for the analytical purpose in particular for the last half of century. In current years, chromatographic method extends its use to the preparative separation where the productivity per resin amount and solvent use become a matter of concern. Recently, simulated moving bed (SMB) method which claims high separation efficiency of the ideal counter-current moving bed chromatography has become a workhorse of preparative separation. SMB technology was developed in the early 1960s for large-scale hydrocarbon separation by UOP and approximately 120 Sorbex units have been licensed to date. Recently, SMB separation technology has been successfully extended from hydrocarbons and sugars to fine chemicals, particularly biochemicals, from laboratory to pilot to production plant. In this paper, the current status of SMB and its modifications were reviewed.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.97-101
• /
• 2022

In this study we investigated the gas to solid heat transfer of bubbling fluidized bed bottom ash cooler installed at the Donghae power plant in South Korea. Several different analyses are done through 1-D calculations and 3-D CFD simulation to predict the bottom ash exit temperatures when it exits the ash cooler. Three different cases are set up to have consideration of unburnt carbon in the bottom ash. Sensible heat comparison and heat transfer calculation between the fluidization air and the bottom ash are conducted and 3-D CFD analysis is done on three cases. We have obtained the results that the bottom ash with unburnt carbon is exiting the ash cooler, exceeding the targeted temperature from both 1-D calculation and 3-D CFD simulation.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.231-236
• /
• 2014

This experiment was carried out to establish the optimum cutting time, plant growth regulator, and bed-soil for rooting by greenwood cutting of Schisandra chinensis. Approximately 7 cm long-shoots of greenwood cuttings were transplanted by various cutting times, plant growth regulators, and bed-soils in the plastic-film house. The rooting rate of greenwood cutting was 12.5% in the April 5th, 73.5% in the May 8th, and 75.5% in the August 5th. The number and length of primary root in greenwood cutting were more in the early May than those in the early August. For mass propagation of Schisandra chinensis. using greenwood cutting, shoots were treated with plant growth regulators on May to increase rooting rate. Rooting rate was 100% with IAA $50mg/{\ell}$, 92.9% with NAA $100mg/{\ell}$, and NAA $1,000mg/{\ell}$, for 60 min. To select effective media for rooting, various medias for bed-soil were treated by single and mixture form for 100 days after cutting. Rooting rate was 91.8% in the single treatment of peat moss or decomposition of granite soil, and this result was better than those in other treatment. The treatment by 1 : 1 mixture of peat moss and horticulture bed soil was rooting with 94.0% best rooting rate.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.379-385
• /
• 2010

This study was carried out to develop cultivation techniques of Climacium japonicum in transparent pot. We analyzed effect of different soil moisture content, air exposure degree, bed soil and ground cover moss on the growth of Climacium japonicum. The best humidity condition in transparent pot culture was 60~80% and a mixture of bed soil with peatmoss : perlite as 7:3 ratio was effective to growth. Two holes(each diameter is 4 mm) in the cover were also effective to the growth and control moisture in the transparent pot. The best mixture of bed soil was moss with peatmoss : pelite(7:3) in the pot culture but price of moss is expensive, the moss treatment was not practical. Total of 10 moss species were selected as ground cover plant; Hypnum erectiusculum Sull. et Lesq., Thuidium kanedae Sak., Hypnum plumaeforme Wils., Trachycystis microphylla Lindb., Bryum argenteum Hedw., Hypnum oldhamii Jaeg., Funaria hygrometrica Hedw., Leucobryum glaucum Aongstr., Polytrichum commune Hedw. and Weissia controversa Hedw. The plant height of selected moss was smaller than that of Climacium japonicum so these moss were very effective to cover the ground.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.677-686
• /
• 2011

This study proposes a formula to calculate length of river bed protection through experimental research and an experimental plant has been installed to investigate the parameters which influence the length of scouring in the river after overflowing the weir. Through hydraulic experiments, the critical velocity, difference of water level between upstream and downstream and height of weir have been selected as independent variables. And new formula to calculate a length of river bed protection is suggested as the result of this study in the consideration of complex weir that consists of movable and fixed weir. The new formula is verified through additional experiments. Results of this study can be used for weir structures' construction and maintenance plans.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.610-613
• /
• 2009

Uldolmok tidal current power plant was constructed on May 2009 at Jindo Gun in Korea. However it had much trouble in installing structure due to the extremely fast tidal current velocity(max. 5.5m/sec) and the jacket type plant structure. Therefore in this paper, The characteristics of tidal current and sea bed topography at Uldolmok tidal current plant site are investigated, and the detailed foundation work process of the plant is described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.769-779
• /
• 2015

In this paper, the ideal standard design and construction of plant factory systems with the Green IT technologies is proposed. For feasibility and problem analysis, a container-type plant factory which was integrated with hardware and software of elemental technologies was operated as a test bed. This operation testing and research will be the foundation of the future construction and operation of large plant factories.