Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Grinding Method for Increasing Specific Surface Area of Fluidized Bed Fly Ash

  • Lim, Chang Sung (Department of Advanced Material Science and Engineering, Kyonggi University) ;
  • Lee, Ki Gang (Department of Advanced Material Science and Engineering, Kyonggi University)
  • Received : 2019.01.08
  • Accepted : 2019.03.06
  • Published : 2019.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, fly ash of a fluidized bed boiler produced in a power plant was stabilized by hydration and carbonation reaction. Then, each raw material was pulverized by two kinds of grinding equipment (Planetary mills and pot mills); the degree of grinding and the agglomeration behavior were observed. It was found that there were changes of specific surface area and particle size distribution according to grinding time. The surface of the raw material was observed using an optical microscope. As a result, agglomerates of about 75 ㎛ or more due to electrostatic phenomenon were formed as the grinding time became longer; it was confirmed that the crushing efficiency slightly increased with use of antistatic agent.

Keywords

References

  1. M. K. Lim, S.-D. Kim, S.-H. Lee, M. Y. Park, Y. D. Lee, and S. J. Jung, "A Study of the Strength and Durability Properties on Recycled Fine Aggregate Mortar and Blain of Blast Furance Slag," Proc. Korea Concr. Inst., 2007 [5] 987-90 (2007).
  2. K. G. Babu and G. S. Nageswara Rao, "Efficiency of Fly Ash in Concrete," Cem. Concr. Compos. 15 [4] 223-29 (1993). https://doi.org/10.1016/0958-9465(93)90025-5
  3. C. G. Han, M. C. Han, and S. W. Kim, "Effect of the Fineness of the Cement made by Particle Size Screening Method on Mechanical Properties of the Concrete," J. Archit. Inst. Korea Struct. Constr., 23 [8] 123-30 (2007).
  4. N. H. Mtarfi, Z. Rais, and M. Taleb "Effect of Clinker Free Lime and Cement Fineness on the Cement Physicochemical Properties." J. Mater. Environ. Sci., 8 [7] 2541-48 (2017).
  5. KSL5405 "Fly ash" Korean Standards Association: Seoul, South Korea, 2018.
  6. P. Chindaprasirt, C. Jaturapitakkul, and T. Sinsiri, "Effect of Fly Ash Fineness on Compressive Strength and Pore Size of Blended Cement Paste," Cem. Concr. Compos. 27 [4] 425-28 (2005). https://doi.org/10.1016/j.cemconcomp.2004.07.003
  7. Y. M. Zhang and T. J. Napier-Munn, "Effects of Particle Size Distribution, Surface Area and Chemical Composition on Portland Cement Strength," Powder Technol., 83 [3] 245-52 (1995). https://doi.org/10.1016/0032-5910(94)02964-P
  8. N. Bouzoubaâ, M. H. Zhang, A. Bilodeau, and V. M. Malhotra, "The Effect of Grinding on the Physical Properties of Fly Ashes and a Portland Cement Clinker," Cem. Concr. Res., 27 [12] 1861-74 (1997). https://doi.org/10.1016/S0008-8846(97)00194-4
  9. R. Siddique, "Performance Characteristics of High-Volume Class F Fly Ash Concrete," Cem. Concr. Res., 34 [3] 487-93 (2004). https://doi.org/10.1016/j.cemconres.2003.09.002
  10. KSL5106 "Testing method for fineness of Portland cement by air permeability apparatus" Korean Standards Association: Seoul, Korea, 2009.
  11. H. G. Ryu and J. K. Woo, "An Analysis on Concrete Properties with the Fineness of Waste Limestone," J. Korea Inst. Bulid. Constr., 7 [1] 85-90 (2007).

Cited by

  1. Characteristics of artificial aggregates employing self-hydraulic fly ash vol.58, pp.5, 2019, https://doi.org/10.1007/s43207-021-00135-3