• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.181-186
• /
• 2017

Synthetic aperture radar(SAR) has been widely used for reconnaissance. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications. Because SAR coherently combines many viewing angles to effectively create a large aperture(narrow beam) radar, the test-bed should be capable of moving straightly SAR sensor for the integration angle to meet resolution. This paper describes the test-bed developed to test and evaluate the SAR performance. It forms high-quality images in real time and saves the raw data for the purpose of post processing on the ground.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.111-121
• /
• 1993

Changes in bed forms and subsequent changes in channel roughness by changes in water discharge are discussed with the field data collected from some alluvial rivers in Korea. This study is limited to the following condition of river flow: (1) Medium size alluvial rivers with their widths of 100 m more or less, (2) Straight and prismatic river reach with no additional causes for energy loss but bed friction, (3) Lower-flow regime with Froude number less than 0.5. Major conclusions obtained from this study can be summarized as follows: (1) For the channels considered in this study, the bed roughness expressed by Manning's n increases from 0.02 for the plane beds with no sediment motion to 0.05 for the dune beds, (2) The roughness coefficient for alluvial channels should not be estimated from Strickler-type equations developed for the fixed beds, (3) The method for determining the channel roughness suggested in the present guideline for river works, River Structure Standard, appears to be lack of generality. More research based on the field data collected in Korea is needed in order to improve the existing methods.

• Journal of Korea Water Resources Association
• /
• v.49 no.5
• /
• pp.391-398
• /
• 2016

The confluence section of rivers forms complex flow pattern due to inflow discharge variation at the mainstream and tributary. Due to complex flow characteristics, bed change and bank erosion at the local section produce lateral geomorphology changes in rivers. In this study, bankline change by bank erosion and bed change were simulated using CCHE2D of 2-dimensional numerical model for quantitative analysis of lateral changes in the confluence section of South Han River and Geumdang Stream. As a result, bankline at the left-side channel of the mainstream was largely changed in the downstream section of the confluence compared to the upstream section. Also, bank erosion in the tributary was hardly occurred and bankline at the left-side tributary and right-side main stream moved to riverside land due to decreased velocity and deposition.

• Korean Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.85-94
• /
• 2003

With 106 detached houses where the elderly people lives, this study was conducted to perform a survey of their residential environment. The results of this study were summarized as follows: While the surveyed houses' safety, sanitation and convenience appeared to be positive, with respect to the conditions of location, 73.6% of the surveyed houses did not meet the requirements for comfort. The average area of each space indicated that the bed room was $12.09m^2$, the living room $14.38m^2$, the kitchen $8.96m^2$, the bath room $3.93m^2$, and the rest room $259m^2$. Then, 93.3% of the bed room had the doorsill. Also, 97.2% of the surveyed houses had retrievable space. The forms of the living room door were a hinged door(55.7%) and a sliding door(44.3%). The 43.4% of the finished material of the living room was wood which was highest. The cooking table forms of kitchen were mainly "ㄱ"-shaped(50.0%) and "ㅡ"-shaped(48.0%), and their average height was 815mm. The fuel used for kitchen was mainly the gas which accounted for 93.4%, but 95.3% of houses had no gas-warning devices. Most houses(77.4%) had an integrated type of bathroom and toilet. In addition, 63.2% houses had the stepped difference between the bathroom and other spaces. But they had no a sliding-prevention devices(not for 92.5%) or heating systems(not for 93.4%) in the bathroom.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2004

The purpose of this study consists in introducing and examining the previous river classification systems applicable to the river improvement technique including geomorphological considerations, and developing a new system using the geomorphological criteria which represent the morphology of rivers. A newly developed system uses the channel reach as a classifying unit which is delineated by upstream and downstream tributaries. It adopts three basic geomorphological criteria for classification: 1) valley-floor width index(VI) reflecting the confinement of the channel in the valley, 2) sinuosity(P) which expresses the channel planform, and 3) bed material($d_{50}$). The system is composed of 24 stream types. Concerning every stream type, valley forms, principal bed forms and fluvial processes with disturbance elements are briefly presented. Finally, the applicability of this system to the Chungmi Stream and the Imjin River data in comparison with that of Rosgen system is examined.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.883-891
• /
• 2010

More recently, there have been significant changes in the forms of channels due to runoff characteristics driven by climate changes and other alterations in basin/channel environments. Particularly, increasing local deposition in major channels is being observed nationwide. Of such phenomena, it is noteworthy that flood-plains show unidirectional growth and lowering of channels within compound channels in the form of a high-flow plain. These changes are supposed to affect management of the river ecology as well as flood control. In this study, the research on channels in Korea confirmed that the phenomenon of local deposition in those channels is actually taking place, rendering a problem to be urgently addressed. Previous studies on bed changes have been focused on low channels based on bed materials distributed over the channels. However, this research has proved that surface-layer deposition of a high-flow plain is closely related with changes in the conditions of ground surfaces and, ultimately, affects the bed of the entire channel as well. According to the intensive research on the condition of the high-flow plain of the mouth of the Han River, the silt deposited in the high-flow plain was the main cause of settlement/growth of vegetation. And this leads to landforming along with woods-forming, disturbing flood control as well as the normal river ecology.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.25-31
• /
• 2009

With rapid growths of economy and technology, structures and forms of buildings have been diversified and complicated. Buildings also have become higher and larger than ever before. As a result, more people use a building and more combustibles exist in the building. Without understanding of combustion characteristics and the establishment of a fire safety plan in case of a residential fire, it is expected great loss of lives and properties. In this study, experiments were carried out to promote an understanding of the combustion characteristics of combustibles in the building. Sofa and bed were used as combustibles in the experiment. Heat release rate of the sofa was about 1.9MW. Heat release rate of the bed was approximately 650kW.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.747-754
• /
• 2004

Thermo-fluid characteristics in coke oven, sintering machine and blast furnace in iron-making facility are key processes related to the quality and productivity of the pig iron. Solid material in the processes usually forms a bed in a gas flow. For simulation of the processes by mathematical model, the solid beds are idealized to be a continuum and a reacting solid flow in the gas flow. Governing equations in the form of partial differential equations for the solid material can be constructed based on this assumption. Iron ore sintering bed is simulated and limited amount of parametric study have been performed. The results have a good agreement with the experimental results or physical phenomena, which shows the validity and applicability of the model.

• Journal of Hydrogen and New Energy
• /
• v.35 no.1
• /
• pp.27-33
• /
• 2024

In this study, we researched Ni-based bead catalysts for the catalytic thermal decomposition of light hydrocarbons. A Ni-based bead-type catalyst was prepared, and catalytic thermal decomposition performance of light hydrocarbons was evaluated. The 30Ni/Al₂O₃ catalyst exhibited the most superior performance, with the presence of both fibrous and carbon black forms on the catalyst surface. Catalytic performance was evaluated for particles sized between 150-250 and 500 ㎛, with excellent catalytic thermal decomposition properties in the 150-250 ㎛ range. After the reaction, carbon removal through collision between catalysts in the fluidized bed was observed. It was confirmed that as the particle size increases, the amount of carbon removed increases.

• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.11-29
• /
• 2006

A bedrock river is a channel in which bedrock is exposed along the channel bed or walls for at least approximately half of its length. In some case, a continuous alluvial veneer may be present, but this is completely mobilized during floods. From the point of long term landscape evolution during the Quaternary, the bedrock channel determines local base level and the lowering rate of bedrock channels controls the rate of erosion and transport processes and forms on the adjacent hillslopes. In this review, various erosional processes in bedrock river channels are classified and discussed. Especially, theoretical and numerical models on channel bed abrasion with bed load sediment particles are introduced and discussed.