• Journal of the Mineralogical Society of Korea
• /
• 제30권1호
• /
• pp.21-29
• /
• 2017

Surface soils on Barton Peninsula, King George Island, West Antarctica were investigated to acquire the mineralogical and geochemical data of soil in Antarctica. Multiline of techniques for example, X-ray diffraction (XRD), transmission electron microscopy (TEM)-electron energy loss spectroscopy (EELS), and wet chemistry analysis were performed to measure the composition of clay minerals, Fe-oxidation states, cation exchange capacity, and total cation concentration. Various minerals in sediments such as smectite, illite, chlorite, kaolinite, quartz and plagioclase were identified by XRD. Fe-oxidation states of bulk soils showed 20-40% of Fe(II) which would be ascribed to the reduction of Fe in clays as well as Fe-bearing minerals. Moreover, redox states of Fe in smectite structure was a ~57% of Fe(III) consistent to the values for the bulk soils. The cation exchange capacity of bulk soils ranged from 100 to 300 meq/kg and differences were not significantly measured for the sampling locations. Total cations (Mg, K, Na, Al, Fe) of bulk soils varies, contrast to the heavy metals (Co, Ni, Cu, Zn, Mn). These results suggested that composition of bed rocks influenced the distribution of elements in soil environments and soils containing clay compositions may went through the bio/geochemical alteration.

• Journal of Sericultural and Entomological Science
• /
• 제28권2호
• /
• pp.9-14
• /
• 1986

The rootability of hardwood cutting of mulberry (Morus alba L.) depending upon the kinds of cutting beds, soil of cutting beds, effect of growth regulator (Rootone-F), pretreatments of cutting scion, parts of branches were investigated, The results were as follows ; 1. Rootability was the highest in cutting after callus formed on sand bed, whereas null in the treatment of rice seedling hot bed. 2. Optimum cutting season was around March 26, showed 100% rootability in all treatments except wooden box filled with sand. 3. The order of rootability related with cutting part of branch was upper$^{\circ}C$), and cutting after formation of callus increased rootability, whereas cuttings left in open air for 5 days showed null rootability.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.35-47
• /
• 1997

The consequences associated with ships running aground depend very much on the soil characteristics of the sea bed and the geometrical shape of the ship bow. The penetration into the sea bed depends on these factors and the penetration is an important factor for the ship motion because it influences the ship heave and pitch motions as well as the friction between the ship and the soil. In this paper a rational calculation model is presented for the sea bed soil reaction forces on the ship bottom. The model is based on the assumption that the penetration of the ship bow generates a flow of pore water through the grain skeleton of the soil. The flow is governed by Darcy\`s law and it is driven by the pressure of the pore water at the bow. In addition to this pore water pressure, the bow is subjected to the effective stresses in the grain skeleton at the bow surface. These stresses are determined by the theory of frictional soils in rupture. Frictional stresses on the bow surface are assumed to be related to the normal pressure by a simple Coulomb relation. The total soil reaction as a function of velocity and penetration is found by integration of normal pressure and frictional stresses over the surface of the bow. The analysis procedure is implemented in a computer program for time domain rigid body analysis of ships running aground and it is verified in the paper through a comparison of calculated stopping lengths, effective coefficients of friction, and sea bed penetrations with corresponding experimental results obtained by model tests as well as large, scale tests.

• Korean Journal of Plant Resources
• /
• 제22권6호
• /
• pp.528-534
• /
• 2009

The study of germination and seedling growth characteristics of Neem under different soil and environment conditions was undertaken. The seed germination started 8 days after sowing in commercial bed soil, whereas, delayed germination was observed in sandy-loam (15 days) and sandy (19 days) soil. The highest germination (73.33%) was observed in commercial bed soil in green house, whereas, the lowest germination was observed in sandy soil (16.67%) and sandy-loam soil (8.33%). The seeds in the open field (sandy soil) also showed poor (10%) germination. The mean number of germination seed/day (GD) and seed germination vigor rate (GV) both were highest in the commercial bed soil with 0.733% and 16.67% respectively in the green house, whereas sandy and sandy-loam soil in green house and open field (sandy soil) all showed much lower GD and GV values. The seedling characteristics of nursery revealed that the seedling grown in the growth chamber in commercial bed soil was significantly higher in all the parameters comparing to others grown in green house and open field. The growth was nearly 7 fold in the chamber compared to that of the green house nursery observed in three months old seedlings. Likewise, HPLC analysis revealed that the green house grown seedling contain higher quantity of pigments compare to the chamber grown seedlings. Among the soils used the commercial soil alone or in combination with sandy and sandy-loam soil in the ratio of 2:1:1 respectively with the temperature of $27{\pm}2^{\circ}C$ showed better for Neem nursery preparation.

• Journal of environmental and Sanitary engineering
• /
• 제5권1호
• /
• pp.1.1-14
• /
• 1990

This study was conducted to investigate the contents of heavy metals in soils of the Kumho river basin, by analyzing soils according to the distance from edge of the river and to the soil layers. The contents of heavy metals in soils showed highly in its downstream. Namely there was shown a remarkably high contents of these heavy metals in the Kum-ho bridge areas where Kongdan stream joins Dalseo stream, such as 39.52ppm for zinc, 35.92ppm for copper, 97.90ppm for iron, 102.45ppm for manganese, 13.92ppm for lead, respectively, and 0.48ppm for cadmium. However, the heavy metals contents in soils around Kangchang bridge tended to gradually decrease in its contents, probably because its main soils consisting of sand. Based on their soil layers, the average contents of these heavy metals in the surface soils were higher than one of the subsurface soil. Its contents according to the distance from the river edge indicated some difference every individual area. Nevertheless, its contents showed lower contents in the area far away from the edge. And its contents tended to again increase in the outside bank. In addition, a remarkable positive correlation is shorten between individual heavy metals, except correlation between iron and lead. Also cadmium just shows reverses correlation in the statistics. With respect to comparison between soil layers, there was a remarkable positive correlation between surface layers and subsurface layers. Considering the above results, it seems that the pollution of river bed's soil is in proportion to it of stream.

• Geomechanics and Engineering
• /
• 제25권1호
• /
• pp.49-58
• /
• 2021

The resistance of soil to the tractive force of flowing water is one of the essential parameters for the stability of the soil when directly exposed to the movement of water such as in rivers and ocean beds. Biopolymers, which are new to sustainable geotechnical engineering practices, are known to enhance the mechanical properties of soil. This study addresses the surface erosion resistance of river-sand treated with several biopolymers that originated from micro-organisms, plants, and dairy products. We used a state-of-the-art erosion function apparatus with P-wave reflection monitoring. Experimental results have shown that biopolymers significantly improve the erosion resistance of soil surfaces. Specifically, the critical shear stress (i.e., the minimum shear stress needed to detach individual soil grains) of biopolymer-treated soils increased by 2 to 500 times. The erodibility coefficient (i.e., the rate of increase in erodibility as the shear stress increases) decreased following biopolymer treatment from 1 × 10-2 to 1 × 10-6 times compared to that of untreated river-sands. The scour prediction calculated using the SRICOS-EFA program has shown that a height of 14 m of an untreated surface is eroded during the ten years flow of the Nakdong River, while biopolymer treatment reduced this height to less than 2.5 m. The result of this study has demonstrated the possibility of cross-linked biopolymers for river-bed stabilization agents.

• Korean Journal of Medicinal Crop Science
• /
• 제3권3호
• /
• pp.246-250
• /
• 1995

Scions from the one- and two-years old and the nodes of Ligusticum chuanxiong stem were used to study the rooting ability with the treatment of plant growth regulators planted to different bed soils as the alternative propagation for the present method by rhizome. The rooting ratio in the scion from the one- and the two-years old plants showed any difference, but that was ranged from 94% to 100% in the first node and from 56% to 64% in the second node from the bottom of the stem. The scion of first node from both the plants showed more than 90% in the root ratio and 16 in the number of rooting and growed more than 31cm in the root length. The Rootone-F and 250ppm of NAA were most effective for the promotion of rooting. Rooting ratios in the sand and in the mixture of vermiculite and perlite as bed soils were about 18%, but that in the cultured soil considerably decreased.

• Horticultural Science & Technology
• /
• 제18권5호
• /
• pp.599-604
• /
• 2000

This experimemt was conducted to determine the effect of ridge-up bed with different height (0, 20, 40, 60 cm) on the fruit quality of 'Miyagawa Wase' satsuma mandarin cultivated in a plastic film house. Soil moisture was measured at the soil depths of 10, 30, and 60 cm for each height of ridge-up bed. The time required to reach the condition, -1.4 Mpa at 30 cm deep in soils, which are supposed to be the ideal soil moisture potential and soil depth for high quality satsuma mandarin production, was 100, 60, and 30 days for 20, 40, and 60 cm ridge-up bed, respectively, and more than 100 days for 0 cm. Peel chromaticity by 'a' value was increased as the ridge-up height went up, so that plants grown at the bed with 60 cm height had 11 degree higher value than those of plants grown at the bed with 0 cm height. The 'a/b' values also had a similiar trend as value 'a'. The reducing sugar level of the fruit juice, which was composed of glucose and fructose, was increased as the height of ridge went up, showing significant difference between the ridge heights. The sucrose level had the same trend as the reducing sugar level although the difference between the ridge heights were not significant. Generally, the soluble solid level is considered to be representing the fruit quality. It had 11.4, 12.1, 12.5, $12.8^{\circ}Brix$ for 0, 20, 40, and 60 cm ridge-ups, respectively, showing $1.4^{\circ}Brix$ difference between 0 and 60 cm ridges. Acidity basically showed the same result as that of the soluble solid level depending on the height of the ridges.

• Korean Journal of Plant Resources
• /
• 제32권6호
• /
• pp.735-742
• /
• 2019

This study investigated a suitable method that could be applied for Asian chain fern [Woodwardia japonica (L. f.) Sm.] to propagate gametophytes and promote sporophyte formation. The gametophytes used in all experiments were obtained from germinated spores in vitro and were subcultured at 8-week intervals. The most appropriate media for gametophyte propagation was identified by culturing 300 mg of gametophyte in Murashige and Skoog (MS) basal medium (1/8, 1/4, 1/2, 1, 2), and Knop medium for 8 weeks. As a result, fresh weight of the gametophyte was increased by 56.7-fold on MS medium. Moreover, antheridium formation as well as gametophyte growth was improved on MS medium, especially. To improve the sporophyte formation ex vitro, 1.0 g of gametophyte was ground with distilled water and spread on eight combinations onto four different culture mediums, such as bed soil, peat moss, perlite and decomposed granite. Then generation and growth of sporophytes were investigated after cultivation for 10 weeks. As a result of this experiment, peat moss had a promotive effect of sporophyte formation at single-use and mixed culture soils. In particular, a mixture of bed soil, peat moss and perlite in a 1:1:1 ratio (v/v/v) led to the accelerated formation (782.5 ea/pot) and the frond growth of sporophytes. This included increases in length and width of fronds. However, promotive effect of gametophyte growth and sporophyte formation was not found at single-use and treatment with high ratio of bed soil.

• Research in Plant Disease
• /
• 제9권2호
• /
• pp.64-67
• /
• 2003

Clubroot disease of Chinese cabbage has extremely occurred in recent years. Conventional soils such as sandy loam soil (saprolite) and clay soil (yellow soil) as bed media combined with field soil application of fungicidal chemicals were tested for the control of clubroot disease. Using sandy loam soil and clay soil as plug seedling bed media efficiently reduced clubroot disease occurrence down to 21.7% and 14.1%, respectively compared to peatmoss (75.7%) and Baroco soil (36.6%) when seedling plants were transplanted into previously-infected Yoncheon field. Application of flusulfamide and azoxystrobin to previsouly-infected soil prior to transplanting also effectively reduced disease incidence, especially when combined with growing seedlings in sandy loam or clay soil media. In conclusion, flusulfamide application prior to trnasplanting as well as utiliz-ing sandy loam and clay soil as a plug bedding media may effectively reduce the occurrence of clubroot dis-ease of Chinese cabbage.