• The Journal of the Acoustical Society of Korea
• /
• 제27권2E호
• /
• pp.35-44
• /
• 2008

The beat frequency is very important for the sound of Buddhist temple bells, but its concrete origins have not yet been fully clarified. In our research, we considered the beat of the bell at Hojobo Temple (Kanagawa Prefecture). Although its beat frequency has already been measured as 1.6 Hz, no satisfactory explanation has been offered for the factor that determines this value. In our previous research, we investigated the "Doza," the point where the bell is struck, and the "Obi," the vertical stripes around the bell, both of which are circumferential asymmetrical factors that can be visually recognized. Our investigations were carried out by using the Finite Element Method. These factors, however, could not sufficiently explain the beat frequency. Here, we first investigate the "Nyu," the many small projections on the bell, and the deviation between the centers of the inner and outer diameters of the bell. These two factors, however, were also found tobe insufficient explanations of the beat frequency. Through subsequent investigation, however, we finally clarified that the beat frequency's origin lies in the local dimension variation in the "Komazume," which is the bottom part of the bell as well as its thickest part.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1169-1176
• /
• 2002

Analytical model of beat response is derived on a slightly asymmetric ring and is veryfied by experiment. The asymmetric ring is a simplified model used to explain the beat property of a Korean bell. The asymmetric ring has mode pair having slight frequency difference in each radial mode. Each mode pair produces beat phenomenon by the interaction of the two close frequency components. Based on the analytical model, beat maps are first proposed and characteristics of beat on the circumference are detaily explained.

• 한국광학회지
• /
• 제14권4호
• /
• pp.351-354
• /
• 2003

본 논문에서는 0.8bit/s/Hz의 높은 대역효율을 얻을 수 있는 12.5GHz채널 간격의 양방향 초고밀도 파장분할다중화(UD-WDM: ultra-dense wavelength division multiplexing) 광채널을 80 km의 단일 모드 광섬유로 전송하였다. 초고밀도 WDM 시스템에서 요구되는 광채널 주파수의 안정화를 위해 BFL(beat-frequency-locking) 기술을 이용하였으며, 실험을 통하여 $\pm$200MHz 이내로 광채널을 안정화 시킬 수 있음을 보였다. 특히, 다수개의 비트 주파수 변별과 높은 주파수 변별력을 확보하기 위하여 RF 스펙트럼 분석기를 이용하였다. BFL 기술이 적용된 채널간격 12.5 GHz 양방향 광채널의 전송 패널티는 단방향 전송과 비교시 단지 0.3dB이었다.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.685-693
• /
• 2002

Analytical model of beat response is derived on a slightly asymmetric ring and the model is veryfied by experiment. The asymmetric ring is a simplified model used to explain the beat property of a Korean bell. The asymmetric ring has mode pairs having slight frequency difference in each radial mode. Each mode pair produces beat phenomenon by the interaction of the two close frequency components. Based on the analytical model, beat maps are first proposed and characteristics of beat on the circumference are detaily explained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.214-219
• /
• 1997

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.81-88
• /
• 2001

We present a new digital phase measuring method for heterodyne optical interferometry, which providers high measuring speed up to 6 m/s with a fine displacement resolution of 0.1 nanometer. The key idea is combining two distinctive digital phase measuring techniques with mutually complementary characteristics to earth other one is counting the Doppler shift frequency counting with 20 MHz beat frequency for high-velocity measurement and the other is the synchronous phase demodulation with 2.0 kHz beat frequency for extremely fine displacement resolution. The two techniques are operated in switching mode in accordance wish the object speed in a synchronized way. Experimental results prove that the proposed dual mode phase measuring scheme is realized with a set of relatively simple electronic circuits of beat frequency shifting, heterodyne phase detection. and low-pass filtering.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1028-1033
• /
• 2009

To detect faults and monitor thinning on a pipe, many people use ultra sonic sensors that are operated in high frequency range. Because there are many modes in high frequency range, it is difficult to find faults and monitor pipe thinning on a structure. If we deal with signals in a low frequency range which include only A0 wave and S0 wave, the information of monitoring and diagnosis can be easily obtained. In this paper, the technique for exciting low frequency range using ultra sonic sensors is proposed. The main idea of the proposed method comes from the beat phenomenon. The beat frequency is equal to the absolute value of the difference in frequency of the two waves. If the beat frequency is tuned by two ultra waves, we can excite A0 mode and S0 mode of structures. To verify the proposed method, we have performed a steel plate and pipe experiments. Experimental results show that two ultra sonic sensors can well excite low frequency range.

• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.373-381
• /
• 2005

The respiratory and heart beat signals are the fundamental physiological signals for sleep monitoring in the home. Using the air mattress sensor system, the respiration and heart beat movements can be measured without any harness or sensor on the subject's body which makes long term measurement difficult and troublesome. The differential measurement technique between two air cells is adopted to enhance the sensitivity. The concept of the balancing tube between two air cells is suggested to increase the robustness against postural changes during the measurement period. With this balancing tube, the meaningful frequency range could be selected by the pneumatic filter method. The mathematical model for the air mattress and balancing tube was suggested and the validation experiments were performed for step and sinusoidal input. The results show that the balancing tube can eliminate the low frequency component between two cells effectively. This technique was applied to measure the respiration and heart beat on the bed, which shows the potential applications for sleep monitoring device in home. With the analysis of the waveform, respiration intervals and heart beat intervals were calculated and compared with the signal from conventional methods. The results show that the measurement from air mattress with balancing tube can be used for monitoring respiration and heart beat in various situations.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.195-201
• /
• 2002

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600~1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with ainus to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial made laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, which allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• 대한임베디드공학회논문지
• /
• 제5권2호
• /
• pp.93-102
• /
• 2010

The FMCW(Frequency Modulation Continuous Wave) radar possesses range-velocity ambiguity to identify the correct combination of beat frequencies for each target in the multi-target situation. It can lead to ghost targets and missing targets, and it can reduce the detection probability. In this pap er, we propose an effective identification algorithm for the correct pairs of beat frequencies and the signal processing hardware architecture to effectively support the algorithm. First, using the correlation of the detected up- and down-beat frequencies and Doppler frequencies, the possible combinations are determined. Then, final pairing algorithm is completed with the power spectrum density of the correlated up- and down-beat frequencies. The proposed hardware processor has the basic architecture consisting of beat-frequency registers, pairing table memory, and decision unit. This method will be useful to improve the radar detection probability and reduce the false alarm rate.