• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.245-246
• /
• 1998

AMB(Active Magnetic Bearing) systems are popularly used in various areas. In biomedical engineering applications it is a key part of magnetically suspended rotary blood pumps. The special advantage of AMBs is that they enable the rotor to revolve with no physical contact and provide rotary blood pumps with better performances such as low hemolysis level. Fundamentally, AMB systems consist of three parts, proximity sensors for distance detection, microprocessor for control algorithm and power amplifiers for actuating electromagnets. We have developed an inductive type proximity sensor with satisfactory characteristics that can be used in AMB systems. Frequency response was flat at least up to 10 kHz and sensitivity, resolution$(>5{\mu}m)$ and sensing range(<5mm) of the sensor could be adjustable for various purposes. The characteristics of the completed model showed to have satisfactory behaviors compared with the commercially available ones that already appeared to have reliable behaviors in AMB systems.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2002

It is well known that the MDVR beamforming outperforms the conventional delay-sum beamformer in the sense of noise rejection and bearing resolution. However, the MDVR method requires long observation time to achieve high frequency resolution. The STMV method uses the steered covariance matrix of sensor data, so it has an ability to form an adaptive weight vector from a single time-series snapshot. But it uses the same weight vector across all frequencies. In this paper, we propose an SSMV method. The basic idea of the SSMV method is to decompose a full frequency band into several subbands to acquire a weight vector for each subband, individually. Also the wrap may be divided into several subarrays in order to reduce a computational load and the bandwidth of each subband. Simulations using real sea trial data show that the proposed SSMV method has good performance with short observation time.

• Journal of Arbitration Studies
• /
• v.17 no.2
• /
• pp.141-165
• /
• 2007

This study aims to make a contribution to the promotion of trade and economic development of South Korea, and, at the same time, call attention to the increasing trend of investment agreements concluded within Free Trade Agreements (FTA) by examining theoretically FTAs and dispute resolution and investigating systematically the conclusion procedure of agreements, and the system, institutions, and jurisdiction of dispute resolution, and presenting these findings to the government and investors involved. The most problematic aspect in the legal process of arbitration involving disputes over investment is that of arguments concerning the right of jurisdiction. When a dispute arises, even though an investor files for arbitration at an ICSID institution, the parties become involved in another energy-consuming argument even before proceeding to the hearing and decision of the original plan in cases in which the respondent of the dispute files an objection to the decision rights of the arbitral tribunal. As the main basis for this type of plea, the point of non-existence of jurisdiction is first raised where the applicable dispute does not fall under the range of investments defined in individual investment contracts or investment agreements such as a Bilateral Investment Treaty (BIT). To avoid an open-ended definition of investment for the range of investments, articles concerning investments in the FTA and NAFTA between Canada and the USA adopt the limited closed-list method. Article 96 of the FTA between Japan and Mexico applied the same abovementioned method of limited form of definition regarding range of investments and concluded BITs between member countries of APEC applied a similar method as well. Instead of employing the previously used inclusive definition, the BITs concluded between countries of Latin America and the USA are equipped with limited characteristics of an investment. Furthermore, to correspond with this necessary condition the three following requirements are needed : 1) fixed investment funding; 2) expected profits resulting from such investments; 3) and the existence of fixed risk bearing.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.103-112
• /
• 2005

This paper presents one-axis high precision scanning system and illustrates the design of modified $X-Y-{\theta}$ stage as a tracker using VCM and commercialized air bearings for it. The scanning system for 100nm resolution is composed of the 3-axis stage and one axis long stroke linear motor stage as a follower. In this study a previous proposed and presented structure of VCM for the fine stage is modified. The tracker has 3 DOF($X-Y-{\theta}$ motions by four VCM actuators which are located on the same plane. So 4 actuating forces are suggested and designed to create least pitch and roll motions. This article will show about the design especially about optimal design. The design focus of this fine stage is to have high acceleration to accomplish high throughput. The optimal design of maximizing acceleration is performed in restrained size. The most sensitive constraint of this optimal design is heat dissipation of coil. There are 5 design variables. Because the relationship between design variables and system parameters are quite complicated, it is very difficult to set design variables manually. Due to it, computer based optimal design procedure using MATLAB is used. Then, this paper also describes the procedures of selecting design variables for the optimal design and a mathematical formulation of the optimization problem. Based on the solution of the optimization problem, the final design of the stage is also presented. The results can be verified by MAXWELL. The designed stage has the acceleration of about 5 $m/s^{2}$ with 40kg total mass including wafer chuck and interferometer mirror. And the temperature of coil is increased $50^{\circ}C$. In addition, the tracker is controlled by high precision controller system with HP interferometer for it and linear scaler for the follower. At that time, the scanning system has high precision resolution about 5nm and scanning resolution about 40nm in 25mm/s constant speed

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2007

The MH21 Research Consortium has conducted a high-resolution 3D seismic survey and a seafloor geochemical survey, to explore methane hydrate reservoirs in the eastern Nankai Trough, offshore Japan. Excellent geological information about shallow formations was obtained from the high-resolution 3D seismic survey, which was designed to image the shallow formations where methane hydrates exist. The information is useful in constructing a geological and geochemical model, and especially to understand the complex geology of seafloor, including geochemical manifestations and the structure of migration conduits for methane gas or methane-bearing fluid. By comparing methane seep sites observed by submersibles with seismic sections, some significant relationships between methane hydrate reservoirs, free gas accumulations below the seafloor, and seafloor manifestations are recognised. Bathymetric charts and seafloor reflection amplitude maps, constructed from seismic reflections from the seafloor, are also useful in understanding the relationships over a vast area. A new geochemical seafloor survey targeted by these maps is required. The relationships between methane hydrate reservoirs and seafloor manifestations are becoming clearer from interpretation of high-resolution 3D seismic data. The MH21 Research Consortium will continue to conduct seafloor geochemical surveys based on the geological and geochemical model constructed from high-resolution 3D seismic data analysis. In this paper, we introduce a basis for exploration of methane hydrate reservoirs in Japan by fusion of 3D seismic exploration and seafloor geochemical surveys.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.299-303
• /
• 2004

A systematic investigation for the reactivity and solvent effect was studied on the reaction of optical resolving agents with the optically active assistant compounds. The reaction rate constants of the nucleophillic substitution reactions were determined by means of conductometric method The linear solvent energy relationship based on the solvent parameters and the thermodynamic parameters was discussed on the reactions of various physiological active compounds and optical resolving agents The reaction mechanism was discussed from the kinetic results compared with the optical purity.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.934-939
• /
• 2004

This paper propose a study on the Feed Characteristics of Twist Friction Driver. We are using Twist Friction Driving mechanism system. The system consists of Twist Friction Driver elements such as driving shaft, driven roller, Spring for pre-load, Air bearing guide, Servo motor, and measuring devices such as Encoder of Servo motor, Laser interferometer, LVDT . The Twist Friction driver is mechanically simple and very quiet at high speed, and has low pre-load. So The Twist Friction driver can materialize an ultra precision feed-resolution. The feed characteristics of the driver is determined by slip and angular error, backlash.

• Phonetics and Speech Sciences
• /
• v.3 no.2
• /
• pp.23-28
• /
• 2011

Electromagnetometers (EMA) have been widely used in articulatory studies as their temporal resolution can capture most speech activities and the fleshpoint information allows one to readily quantify and analyze tongue shape. However, the drawback is that the data lacks details of activity in the pharyngeal region. Several studies have attempted to estimate the unknown pharyngeal shape of the tongue, but few studies are based on unimodal data containing both front and back regions of the tongue at the same time. We use Stone's ball bearing method to obtain fleshpoint data as well as tongue shape. We further introduce a novel way of connecting balls and attaching them onto the tongue to ensure accurate tracking. An Artificial Neural Network is applied to build a map between observable flesh-points, unknown tongue shape, and pharyngeal region and is optimized to efficiently address nonlinearity.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.50-56
• /
• 2005

This paper is described a development of an optical fiber displacement sensor. The optical fiber sensor using an intensity modulated measures the displacement between target and sensor. A prototype sensor is composed of a transmitting part, a receiving part and a signal processing circuit. The experiment was conducted not only the sensor performance but also factors that affect intensity. The main performance of this sensor is resolution of 0.37um and the non-linearity $0.7\%$ FS and the dynamic bandwidth of about 6.3kHz. As a result of rotation test, the prototype sensor showed an equivalent performance to a commercial eddy current sensor.