• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.29-39
• /
• 2019

In this paper, it was presented an investigation on the load-settlement and vertical stress analysis of the ring footings on the loose sand bed by conducting both laboratory model tests and numerical analyses. A total of twenty tests were conducted in geotechnical laboratory and numerical analyses of the test models were carried out using the finite element package Plaxis 3D to find the ultimate capacities of the ring footings. Moreover, the results obtained from both foregoing methods were compared with theoretical results given in the literature. The effects of the ring width on bearing capacity of the footings and vertical stresses along the depth were investigated. Consequently, the experimental observations are in a very good agreement with the numerical and theoretical results. The variation in the bearing capacity is little when $r_i/R_o$ <0.3. That means, when the ring width ratio, $r_i/R_o$, is equal to 0.3, this option can provide more economic solutions in the applications of the ring footings. Since, this corresponds to less concrete consumption in the ring footing design.

• 한국지반공학회지:지반
• /
• 제9권4호
• /
• pp.37-44
• /
• 1993

실내 모형실험을 통하여 모형말뚝 한계깊이의 확인과 기존 선단지지력의 이론식들을 실내모형실험의 선단지지력 실측치와 비교하여 그 차이를 분석하였으며, 말뚝의 직경차이에서 유발되는 지지력의 차이를 비교하고자 실내 모형실험을 실시하였다. 모형지반을 균질한 모래로 조성한 경우와 국내의 현장조건에 가깝게 모형지반을 조성한 모래/풍화토층 경우로 나누어 모형실험을 실시하여 치수효과를 비교하였다. 실험결과, 모형말뚝의 선단지지력은 모래지반의 경우 응력수 준이 높을 때 한계관입깊이 효과를 나타냈으며, 모래1풍화토층의 경우 한계관입깊이를 확연히 확인할 수는 없었으나 그 경향을 보임을 알 수 있었다. 정적지지력 공식으로부터 얻어진 계산치 들은 모형실험에 의한 실측치부다 훨씬 큰 값으로 과대평가 하는 경향이 있었다. 직경크기에 따른 지지력의 차이인 치수효과는 모래지반의 경우 확인할 수 있었으나. 모래/풍화토층 지반의 경 추에는 오히려 큰 직경의 말뚝이 작은 직경의 말뚝보다 크게 나타나는 경향을 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1118-1125
• /
• 2009

본 연구는 국내의 초연약지반에 적용 가능한 표층보강재를 이용한 연약지반 표층처리공법을 정립시키기 위한 기초적 연구로서 표층처리공법에 사용되는 보강재의 강성도를 고려한 지 지력산정방법을 제안하는 것을 목적으로 하고 있다. 이를 위하여 직포, 지오그리드, 강봉(대나무 대채재료)을 이용하여 광폭인장시험 및 보강재의 단부 구속조건을 완전구속, 부분구속(3종류)으로 한 21 종류의 실내모형실험을 수행하였다. 실험결과, Terzaghi의 지지력이론식은 직포와 지오그리드와 같은 연성보강재 사용시에는 지지력산정이 적절하나, 대나무 망과 같은 강성도가 큰 재료에 대해서는 강성도를 적절히 표현하지 못하는 것으로 평가되었으며, 초연약지반 표층처리공법의 지지력산정방법을 Terzaghi 지지력이론식을 수정하여 강성도의 영향을 정확히 평가하는 새로운 지지력이론식을 제안하였다.

• 산업기술연구
• /
• 제34권
• /
• pp.45-52
• /
• 2014

In this paper the settlement characteristic of shallow foundation on sandy soil overlained by rigid ground was investigated by analyzing results of model tests. For model experiments, model tests were performed with sandy soils sampled from the field, changing the relative density of sandy soil and the ratio of thickness of sandy layer(H) to the width of model strip footing(B). As result of tests, settlement of sandy soils increases as the value of H/B increases, whereas it increases with relative density of soil. Bearing capacity decreases as the thickness of the sand layer relative to the footing width increases. In order to analyze the settlement characteristics of sandy ground, the results of model tests were compared with the predicted values using the empirical formulas proposed by Terzaghi, De Beer and Schmertmann. The method by De Beer was found to be in good agreements with test results.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.47-54
• /
• 2011

A piled raft foundation is one of the systems used to reduce the settlement of structures. However, the general design method for a piled raft foundation system assumes that the piles only support external loads, which exclude the bearing capacity of the raft itself. In this study, an experimental model test was performed to evaluate the raft capacity for the external load on the sand. Additionally, a part of the sandy ground under the raft was replaced with a gravel mat to reinforce the piled raft foundation system and increase the bearing capacity. Then, parametric studies of the reinforced ground were performed to determine the displacement and load-sharing ratio of the piled raft foundation system.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.689-705
• /
• 2017

The present study deals with the Pressure-settlement behavior of square and rectangular skirted footing resting on sand and subjected to a vertical load through a laboratory experimental study. A series of load tests were conducted in the model test tank to evaluate the improvement in pressure-settlement behavior and bearing capacity of square and rectangular model footings with and without structural skirt. The footing of width 5 cm and 6 cm and length/width ratio of 1 and 2 was used. The relative density of sand was maintained at 30%, 50%, 70%, and 87% respectively. The depth of skirt was varied from 0.25 B to 1.0 B. All the tests were carried out using a strain controlled loading frame of 50 kN capacity. The strain rate for all test was kept 0.24 mm/min. The results of present study reveal that, the use of structural skirt improves the bearing capacity of footing significantly. The improvement in bearing capacity was observed almost linearly proportional to the depth of skirt. The improvement in bearing capacity of skirted footings over footing without skirt was observed in the range of 33.3% to 68.5%, 68.9% to 127% and 146.7% to 262% for a skirt depth of 0.25 B, 0.50 B and 1.0 B respectively. The skirted footings were found more effective for sand at relative density of 30% and 50% than at relative density of 70% and 87%. The bearing capacity was found to increase linearly with footing width for footings with and without skirts. This observation was found to be consistent for footings with different skirt depths and for relative density of sand i.e., 30%, 50%, 70%, and 87%. The obtained results from the study for footing with and without skirts were comparable with available solutions from literature.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.853-861
• /
• 2015

본 연구에서는 수치해석을 이용한 piled raft 기초의 복합적인 거동평가를 위해 축대칭 조건 및 경계면 요소를 적용한 유한차분해석 모델링 방법이 합리적인지 검증하였다. 이를 위해 실내모형실험 결과와 수치해석 결과를 비교 분석하여 piled raft 기초의 모델링 방법의 적합성을 평가하였다. 그리고 실제 현장조건을 고려한 기초 매개변수에 대한 민감도분석을 수행하여 raft의 하중분담율을 분석하였다. 연구 결과, 실내모형실험과 수치해석 결과에서 지지력-수직변위의 상관관계가 동일한 경향을 보였으며, piled raft 기초의 극한지지력과 raft의 하중분담율이 비교적 유사하게 산정되었다. 그리고 민감도분석을 통해 raft의 하중분담율은 약 33%~52% 사이에서 산정되어, 기존 연구 결과와 유사함을 확인하였다. 따라서 piled raft 기초는 축대칭 조건 및 경계면 요소를 이용하여 효과적으로 모델링될 수 있을 것으로 판단된다.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.717-729
• /
• 2019

A horizontal cyclic test was carried out to study the seismic performance of lightweight aggregate concrete filled steel tube (LACFST). The constitutive and hysteretic model of core lightweight aggregate concrete (LAC) was proposed for finite element simulation. The stress and strain changes of the steel tube and concrete filled inside were measured in the experiment, and the failure mode, hysteresis curve, skeleton curve, and strain curve of the test specimens were obtained. The influence of axial compression ratio, diameter-thickness ratio and material strength were analysed based on finite element model. The results show that the hysteresis curve of LACFST indicated favourable ductility, energy dissipation, and seismic performance. The LACFST failed when the concrete in the bottom first crushed and the steel tube then bulged, thus axial force imposed by prestressing was proved to be feasible. The proposed constitutive model and hysteretic model of LAC under the constraint of its steel tube was reliable. The bearing capacity and ductility of the specimen increase significantly with increasing thickness of the steel tube. The bearing capacity of the member improves while the ductility and energy dissipation performance slightly decreased with the increasing strength of the steel and concrete.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.750-758
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 25 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. And the result indicated that the modulus of subgrade reaction or $N_c$ value (5.3) apparently overestimated the bearing capacity of very soft ground such as dredged ground. Moreover, as a result of model test by partially constraining the preload of 23.0kgf using geotextile, the effect of bearing capacity($q_1$) appeared to be the largest till the loading stress was $0.4tf/m^2$ due to cohesion, while it reached 75% of the maximum bearing force after $0.4tf/m^2$ due to increase in the effect of bearing capacity($q_2$) caused by the tensile force of the reinforcement. Such results tended to have appeared constantly or very similarly with each other, irrespective of the type of reinforcement (geogrid, steel bar) and constraint conditions.

• 한국농공학회지
• /
• 제30권1호
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.