DOI QR코드

DOI QR Code

Behaviour of lightweight aggregate concrete-filled steel tube under horizontal cyclic load

  • Fu, Zhongqiu (College of Civil and Transportation Engineering, Hohai University) ;
  • Ji, Bohai (College of Civil and Transportation Engineering, Hohai University) ;
  • Wu, Dongyang (College of Civil and Transportation Engineering, Hohai University) ;
  • Yu, Zhenpeng (College of Civil and Transportation Engineering, Hohai University)
  • 투고 : 2018.09.05
  • 심사 : 2019.09.07
  • 발행 : 2019.09.25

초록

A horizontal cyclic test was carried out to study the seismic performance of lightweight aggregate concrete filled steel tube (LACFST). The constitutive and hysteretic model of core lightweight aggregate concrete (LAC) was proposed for finite element simulation. The stress and strain changes of the steel tube and concrete filled inside were measured in the experiment, and the failure mode, hysteresis curve, skeleton curve, and strain curve of the test specimens were obtained. The influence of axial compression ratio, diameter-thickness ratio and material strength were analysed based on finite element model. The results show that the hysteresis curve of LACFST indicated favourable ductility, energy dissipation, and seismic performance. The LACFST failed when the concrete in the bottom first crushed and the steel tube then bulged, thus axial force imposed by prestressing was proved to be feasible. The proposed constitutive model and hysteretic model of LAC under the constraint of its steel tube was reliable. The bearing capacity and ductility of the specimen increase significantly with increasing thickness of the steel tube. The bearing capacity of the member improves while the ductility and energy dissipation performance slightly decreased with the increasing strength of the steel and concrete.

키워드

과제정보

연구 과제 주관 기관 : The National Natural Science Fund of China, Central Universities

참고문헌

  1. Arivalagan, S. and Kandasamy, S. (2010), "Test of void-filled SHS beams under cyclic loading", J. Reinf. Plast. Compos., 29(10), 1534-1544. https://doi.org/10.1177/0731684408100896
  2. Duarte, A.P.C., Silva, B.A., Silvestre, N., De Brito, J., Julio, E. and Castro, J.M. (2016), "Experimental study on short rubberized concrete-filled steel tubes under cyclic loading", Compos. Struct., 136(2), 394-404. https://doi.org/10.1016/j.compstruct.2015.10.015
  3. Esfandyary, R., Razzaghi, M.S., Eslami, A. and Branch, T. (2015), "A parametric investigation on the hysteretic behaviour of CFT column to steel beam connections", Struct. Eng. Mech., Int. J., 55(1), 205-228. https://doi.org/10.12989/sem.2015.55.1.205
  4. Fu, Z.Q., Wang, Q.D., Wang, Y.X. and Ji, B.H. (2018), "Bending performance of lightweight aggregate concrete-filled steel tube composite beam", KSCE J. Civil Eng., 22(10), 1-9. https://doi.org/10.1007/s12205-018-0660-z
  5. Ge, H.B. and Usami, T. (1996), "Cyclic tests of concrete-filled steel box columns", J. Struct. Eng., 122(10), 1169-1177. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:10(1169)
  6. Ghannam, S., Jawad, Y.A. and Hunaiti, Y. (2004), "Failure of lightweight aggregate concrete-filled steel tubular columns", Steel Compos. Struct., Int. J., 4(1), 1-8. https://doi.org/10.12989/scs.2004.4.1.001
  7. Guo, Z.H. (1982), "Experimental study on the stress-strain curve of concrete", J. Build. Struct., 3(1), 1-12. [In Chinese] https://doi.org/10.3151/jact.2.395
  8. Hajjar, J.F. (2000), "Concrete-filled steel tube columns under earthquake loads", Progress Struct. Eng. Mater., 2(1), 72-81. https://doi.org/10.1002/(SICI)1528-2716(200001/03)2:1<72::AID-PSE9>3.0.CO;2-E
  9. Han, L.H. and Yang, Y.F. (2005), "Cyclic performance of concretefilled steel CHS columns under flexural loading", J. Constr. Steel Res., 61(4), 423-452. https://doi.org/10.1016/j.jcsr.2004.10.004
  10. Inai, E., Mukai, A., Kai, M., Tokinoya, H., Fukumoto, T. and Mori, K. (2004), "Behavior of concrete-filled steel tube beam columns", J. Struct. Eng., 130(2), 189-202. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(189)
  11. Jeddi, M.Z., Sulong, N.R. and Khanouki, M.A. (2017), "Seismic performance of a new through rib stiffener beam connection to concrete-filled steel tubular columns: an experimental study", Eng. Struct., 131(1), 477-491. https://doi.org/10.1016/j.engstruct.2016.10.038
  12. Ji, B., Fu, Z., Qu, T. and Wang, M. (2013), "Stability behavior of lightweight aggregate concrete filled steel tubular columns under axial compression", Adv. Steel Constr., 9(1), 1-13.
  13. Khanouki, M.A., Sulong, N.R., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121(6), 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002
  14. Kim, D.H., Lee, C.H., Ju, Y.K. and Kim, S.D. (2015), "Subassemblage test of buckling-restrained braces with Hshaped steel core", Struct. Des. Tall Special Build., 24(4), 243-256. https://doi.org/10.1002/tal.1164
  15. Krishan, A.L., Troshkina, E.A. and Chernyshova, E.P. (2016), "Efficient design of concrete filled steel tube columns", Proceedings of the 2nd International Conference on Industrial Engineering, Chelyabinsk, Russia, May.
  16. Lee, H.J., Park, H.G., Park, S.S., Kim, S.B. and Choi, I.R. (2015), "Cyclic loading test for exterior beam-column joints of CEFT columns", J. Struct. Eng., 142(2), 04015147. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001401
  17. Liu, Y.B. (2013) "Study on hysteretic behavior of defective concrete filled steel tubular members", Master's Dissertation; Fuzhou University, Fuzhou, China. [In Chinese]
  18. Roeder, C.W., Stephens, M.T. and Lehman, D.E. (2018), "Concrete filled steel tubes for bridge pier and foundation construction", Int. J. Steel Struct., 18(1), 39-49. https://doi.org/10.1007/s13296-018-0304-7
  19. Samani, A.K. and Attard, M.M. (2012), "A stress-strain model for uniaxial and confined concrete under compression", Eng. Struct., 41(8), 335-349. https://doi.org/10.1016/j.engstruct.2012.03.027
  20. Skalomenos, K.A., Hatzigeorgiou, G.D. and Beskos, D.E. (2015), "Modeling level selection for seismic analysis of concrete-filled steel tube/moment-resisting frames by using fragility curves", Earthq. Eng. Struct. Dyn., 44(2), 199-220. https://doi.org/10.1002/eqe.2465
  21. Subramoni, P.T. and Saratha, J.P. (2018), "Behaviour of Beam-Column Subjected to Reversed Lateral Loading", KSCE J. Civil Eng., 22(7), 2464-2468. https://doi.org/10.1007/s12205-017-2023-6
  22. Tort, C. and Hajjar, J.F. (2009), "Mixed finite-element modeling of rectangular concrete-filled steel tube members and frames under static and dynamic loads", J. Struct. Eng., 136(6), 654-664. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000158
  23. Varma, A.H., Ricles, J.M. and Sause, R. (2000), "Seismic behavior, analysis, and design of high strength square concrete filled steel tube (CFT) columns", Doctoral Dissertation; Lehigh University, PA, USA.
  24. Wang, Y.H., Lu, G.B. and Zhou, X.H. (2018), "Experimental study of the cyclic behavior of concrete-filled double skin steel tube columns subjected to pure torsion", Thin-Wall. Struct., 122(6), 425-438. https://doi.org/10.1016/j.tws.2017.10.034
  25. Yu, X., Tao, Z. and Song, T.Y. (2016), "Effect of different types of aggregates on the performance of concrete-filled steel tubular stub columns", Mater. Struct., 49(9), 3591-3605. https://doi.org/10.1617/s11527-015-0742-z