• 제목/요약/키워드: Beam profile

검색결과 471건 처리시간 0.03초

원고리형 레이저광에 의한 근사 무회절 광의 발진 (Generation of non-diffraction beam with annular laser output beam)

  • 김현태;박대윤;김기식
    • 한국광학회지
    • /
    • 제12권6호
    • /
    • pp.496-502
    • /
    • 2001
  • Scraper 출력경을 이용하는 불안전 공진기형 Nd:YAG 레이저 발진기에서 고리 두께 0.145mm인 원고리형 레이저광을 얻었으며, 초점거리에 위치한 베셀렌즈를 통과시켜 근사 무회절 광을 얻었다. 초점거리 1 m의 렌즈를 이용하여 얻은 근사 무회절 광에 대해서 렌즈로부터 거리 z의 변화에 따른 출력세기를 측정하여 이론과 비교 ·분석하였다. 또한 초점거리 5m의 렌즈를 이용한 경우, 거리 33m의 지점에서도 근사 무회절광이 지속됨을 확인하였다

  • PDF

빔 출력 특성 개선을 위한 빔 프로파일 모니터링 시스템 개발 (The Development of a beam profile monitoring system for improving the beam output characteristics)

  • 안영준;허민구;양승대;신대섭;이동훈
    • 한국정보통신학회논문지
    • /
    • 제19권11호
    • /
    • pp.2689-2696
    • /
    • 2015
  • 방사선 진단에 사용되는 방사성동위원소 중 사이클로트론을 이용해 생산되는 방사성동위원소는 사이클로트론에서 인출된 양성자 빔이 타겟에 조사될 때 빔의 크기와 모양, 조사되는 위치에서 빔 균일 정도에 따라 생산 수율에 영향을 받는다. 이에 본 논문에서는 사이클로트론 빔 라인에서 빔의 단면을 측정할 수 있는 BPM(Beam Profile Monitor)장치를 개발하였다. LabView로 BPM장치를 원격 제어할 수 있도록 구성하였으며 BPM 프로그램을 이용하여 X축과 Y축으로 텅스텐 와이어를 스캔하면서 얻은 빔의 수치 정보를 2차원 그래프와 3차원 빔 분포 그래프로 표시하여 해석을 쉽게 모니터링 할 수 있도록 하였다. 빔을 측정하는 데 걸리는 시간은 스텝 모터 구동 속도가 2000pps일 때 37초가 걸린다는 것을 확인 할 수 있었다. 측정된 빔 분포정보를 기반으로 빔 재조정을 통해 빔 분포를 최적화함으로써 방사성동위원소 생산 수율을 극대화 시킬 수 있고 공급 안정화에도 기여하리라 본다.

고차(高次) 변위(變位)를 고려(考慮)한 요소(要素)의 해석(解析) (Development of Degenerated Beam Elements Using Higher-Order Displacement Profile)

  • 신영식
    • 대한토목학회논문집
    • /
    • 제2권3호
    • /
    • pp.75-86
    • /
    • 1982
  • 본 연구에서는 3절점, 6자유도를 갖는, 종래의 Timoshenko 보 이론에 근거한 깊은 보(Thick beam) 요소(DB6)와 3절점, 7자유도를 갖는 3차 축방향변위를 가정한 고차 보 요소(DB7)의 3차원 연속체로부터의 Degeneration을 보여 주고 있다. DB6 보 요소는 전단변형률의 비살제적인 선형분포를 보완하기 위하여 전단계수(shear coefficient)를 도입하고 있는 반면 고차 DB7 보 요소는 보다 실제적인 전단변형률의 2차분포를 가정하고 있다. 이 들 두 보 요소를 이용하여 계산된 해(解)는 Timoshenko 방정식의 해(解), 얕은 보(Thin beam)의 해(解) 및 다른 여러 보 요소들의 해(解)와 비교된다. 본 연구의 결과는 고차 DB7 보 요소가 보의 정력화적 해석이나 자유진동 해석에 있어서 다른 보 요소들에 비해 월등히 정확함을 보여주고 있다.

  • PDF

Analysis of Dose Distribution According to the Initial Electron Beam of the Linear Accelerator: A Monte Carlo Study

  • Park, Hyojun;Choi, Hyun Joon;Kim, Jung-In;Min, Chul Hee
    • Journal of Radiation Protection and Research
    • /
    • 제43권1호
    • /
    • pp.10-19
    • /
    • 2018
  • Background: Monte Carlo (MC) simulation is the most accurate for calculating radiation dose distribution and determining patient dose. In MC simulations of the therapeutic accelerator, the characteristics of the initial electron must be precisely determined in order to achieve accurate simulations. However, It has been computation-, labor-, and time-intensive to predict the beam characteristics through predominantly empirical approach. The aim of this study was to analyze the relationships between electron beam parameters and dose distribution, with the goal of simplifying the MC commissioning process. Materials and Methods: The Varian Clinac 2300 IX machine was modeled with the Geant4 MC-toolkit. The percent depth dose (PDD) and lateral beam profiles were assessed according to initial electron beam parameters of mean energy, radial intensity distribution, and energy distribution. Results and Discussion: The PDD values increased on average by 4.36% when the mean energy increased from 5.6 MeV to 6.4 MeV. The PDD was also increased by 2.77% when the energy spread increased from 0 MeV to 1.019 MeV. In the lateral dose profile, increasing the beam radial width from 0 mm to 4 mm at the full width at half maximum resulted in a dose decrease of 8.42% on the average. The profile also decreased by 4.81% when the mean energy was increased from 5.6 MeV to 6.4 MeV. Of all tested parameters, electron mean energy had the greatest influence on dose distribution. The PDD and profile were calculated using parameters optimized and compared with the golden beam data. The maximum dose difference was assessed as less than 2%. Conclusion: The relationship between the initial electron and treatment beam quality investigated in this study can be used in Monte Carlo commissioning of medical linear accelerator model.

Microwave Electric Field and Magnetic Field Simulations of an ECR Plasma Source for Hyperthermal Neutral Beam Generation

  • 이희재;김성봉;유석재;조무현;남궁원
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.501-501
    • /
    • 2012
  • A 2.45 GHz electron cyclotron resonance (ECR) plasma source with a belt magnet assembly configuration (BMC) was developed for hyperthermal neutral beam (HNB) generation. A plasma source for high flux HNB generation should be satisfied with the requirements: low pressure operation, high density, and thin plasma. The ECR plasma source with BMC achieved high density at low operation pressure due to electron confinement enhancement caused by high mirror ratio and drifts in toroidal direction. The 2.45 GHz microwave launcher had a circularly bended WR340 waveguide with slits. The microwave E-field profile induced by the microwave launcher was studied in this paper. The E-field profile was a cups field perpendicular to B-filed at ECR zone. The optimized E-field profile and B-field were found for effective ECR heating.

  • PDF

Static behavior of novel RCS through-column-type joint: Experimental and numerical study

  • Nguyen, Xuan Huy;Le, Dang Dung;Nguyen, Quang-Huy
    • Steel and Composite Structures
    • /
    • 제32권1호
    • /
    • pp.111-126
    • /
    • 2019
  • This paper deals with experimental investigation and modeling of the static behavior of a novel RCS beam-column exterior joint. The studied joint detail is a through-column type in which an H steel profile totally embedded inside RC column is directly welded to the steel beam. The H steel profile was covered by two supplementary plates in the joint area in order to avoid the stirrups resisting shear in the joint area. Two full-scale through-column-type RCS joints were tested under static loading. The objectives of the tests were to examine the connection performance and to highlight the contribution of two supplementary plates on the shear resistance of the joint. A reliable nonlinear 3D finite element model was developed using ABAQUS software to predict the response and behavior of the studied RCS joint. An extensive parametric study was performed to investigate the influences of the stirrups, the encased profile length and supplementary plate length on the behavior of the studied RCS joint.

구형렌즈를 사용한 초소형 광 스위치에서의 Simulation (The Simulation of Micro Optical Cross Connect Based On Ball Lens)

  • 이두원;김호성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.594-596
    • /
    • 2000
  • The best simulation condition for the fiber collimator that uses ball lenses was investigated. This kind of fiber collimator can be used in a Micro-Optical-Cross-Connects(MOXC). MOXC is composed of collimating ball lenses, micro mirrors and single-mode fibers. In order to design a MOXC, it is very important to calculate beam path, beam radius, divergence angle that determines the insertion loss of the MOXC. Since the beam profile from the fiber facet is not exact Gaussian profile, it was found that the simulation condition in which beam waist exists on the fiber facet, ignoring Numerical Aperture(NA), gives best agreement with the experimental results. Beam radii were measured with conventional knife edge method.

  • PDF

토션빔의 단면형상에 다른 현가계의 구조적 특성과 롤 거동에 관한 연구 (A study on the structural characteristics and roll behavior of suspension for the section profile of torsion beam)

  • 이동찬;변준형
    • 한국자동차공학회논문집
    • /
    • 제7권9호
    • /
    • pp.195-202
    • /
    • 1999
  • The kinematic and complicance characteristics of torsion beam axle is structurally related to the location and section profile of torsion beam and the span from body mounting point to wheel center. This paper presents the effect of section properties in torsion beam on the structural characteristics and roll behavior of suspension. The structural characteristics is on the maximum stress on the welding area of torsion beam and the roll behavior is on roll steer and roll-camber of suspension which are important for controllability and stability in cornering. Four factors are used for the section design of torsion beam, which are thickness , midline length, are inner radius, and sector half angle . Through the structural and quasi-static analysis made for six torsion beam axle models, it can be noticed that roll steer and the structural durability of suspension are closely related to warping constant and shear center in section properties of torsion beam.

  • PDF

Buried Channel PMOS에서 이온 주입된 $BF_2$ 열처리 거동

  • 허태훈;노재상
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.374-374
    • /
    • 2012
  • 반도체 소자의 크기가 100 nm 이하로 감소되면 통상적인 이온 주입 조건인 이온 에너지, 조사량 및 이온 주입 각도뿐만 아니라 Dose Rate 및 모재 온도가 Dopant Profile을 조절하는 데에 있어서 매우 중요한 인자로 작용한다. 본 연구에서는 Ribbon-beam 및 Spot-beam을 사용하여 활성화 열처리 후 Dopant Profile을 분석하였다. 이온 주입은 모든 시편에서 $BF_2$를 가속 에너지 10 keV 및 조사량 $2{\times}10^{15}/cm^2$로 고정하였다. 이온 주입 후 도펀트 활성화는 100% 질소 분위기 하에서 $850^{\circ}C$-30s 조건으로 RTA 열처리를 수행하였다. Boron 및 Fluorine의 Profile은 SIMS 분석을 통하여 구하였다. Spot-beam은 Ribbon-Beam에 비하여 Dose Rate 및 Cooling Efficiency가 높기 때문에 이온 주입 후 더욱 많은 양의 Primary-defect를 발생시키고 이에 따라 두꺼운 비정질 충을 형성한다. $BF_2$ 이온 주입 된 시편에서 B 및 F의 농도 Peak-height는 a/c 계면에 위치하는 것을 관찰하였다. 또한 B 및 F의 농도 Peak-height는 Silicon 모재의 온도가 증가할수록 증가하는 것을 관찰하였다. Silicon 모재의 온도가 증가함에 따라 Active-area의 면저항이 변화하지 않는 상태에서 Vt (Threshold Voltage)가 급격히 감소함을 관찰 하였다. 비정칠 층의 두께가 증가할수록 a/c 계면 하단에 잔존하는 Residual-defect의 양이 감소하고 이는 측면확산을 감소시키는 역할을 한다는 것이 관찰되었다.

  • PDF