• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.251-254
• /
• 2003

In recent years, shearogrpahy has significantly improved capabilities In the areas of unbend and separation detection in tires. Although shearography has many advantages fur qualitative evaluation, the technique remains the problem of quantitative analysis of inside defects, because shearography needs several effective factors including the amount of shearing, shearine direction and induced load, which exist as barrier for the quantitative analysis of inside defects. Since the factors are highly dependent on inspectors skill and also affect the in-situ workability. The factors were optimized and the size of cracks inside of pipeline and tire has been quantitatively determined.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.609-614
• /
• 2000

This paper is an experimental study of the normal strength concrete beam and high strength concrete beam for the analysis of bending and shear behavior. In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling increase construction cost, the good ceiling system such as beam with opening give to economical merits because of a substantial reduction in materials and construction cost. For the analysis on the mechanical behavior of the reinforced high strength and normal strength concrete beams with circular opening in the web, the stress concentration of the circular opening, crack pattern and reinforcing methods were studied. Twenty test pieces with different reinforcing methods and difference concrete strength were tested and their resisting forces and load deflection curves were defined in this study.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.461-479
• /
• 2022

A finite element method analysis framework is introduced for the free vibration analyses of functionally graded porous beam structures by employing two variables trigonometric shear deformation theory. Both Young's modulus and material density of the FGP beam element are simultaneously considered as grading through the thickness of the beam. The finite element approach is developed using a nonlocal strain gradient theory. The governing equations derived here are solved introducing a 3-nodes beam element. A comprehensive parametric study is carried out, with a particular focus on the effects of various structural parameters such as the dispersion patterns of GPL reinforcements and porosity, thickness ratio, boundary conditions, nonlocal scale parameter and strain gradient parameters. The results indicate that porosity distribution and GPL pattern have significant effects on the response of the nanocomposite beams.

• 한국음향학회지
• /
• 제32권4호
• /
• pp.287-293
• /
• 2013

본 논문에서는 20 kHz와 32.5 kHz에 공진 주파수를 갖는 다공진 트랜스듀서를 $3{\times}16$ 배열로 구성하여 파라메트릭 배열 신호를 생성하는 시스템을 제안한다. 배열 트랜스듀서를 구동하기 위해 LM1875증폭기 소자를 이용하여 16채널 다중 증폭기를 제작하였고, 임의의 파형 생성 및 분석을 하기 위해 PXI 시스템과 LabView 8.6을 이용한 시스템이 구축되었다. 구축된 시스템을 이용하여 거리에 따른 음압레벨 변화와 빔 패턴을 측정하여 파라메트릭 현상을 확인하였다. 이론적으로 계산된 차 주파수의 감쇠거리와 회절거리는 각각 15.51 m와 1.9332 m이며, 음압레벨 실험결과 회절거리 이전 근거리 음장에서 차 주파수의 음압이 누적되어 증가되는 현상을 확인 하였다. 실험을 통해 측정된 차 주파수의 빔 패턴은 2개의 1차 주파수가 중첩된 빔 패턴과 유사함을 확인하여 고지향 파라메트릭 신호가 생성됨을 확인하였다.

• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1309-1315
• /
• 2011

The design process for obtaining the reliable steeraxle casting beam of fork lift truck is studied in this paper, as the casting beam is major component of steeraxle which has a steering function at driving. In this study, the driving mode and damage pattern of casting beam which could be occurred from the customer site were analyzed and it established the design process to predict the fatigue life by FEA(Finite Element Analysis) so that the reliability of steeraxle casting beam could be verified at DVT(Design Validation Test) mode. This paper provides guidance on the process of designing the reliable steeraxle casting beam at the initial design stage and also, provides guidance on the process of solving the problem when the failure is occurred in the field.

• 한국인터넷방송통신학회논문지
• /
• 제19권4호
• /
• pp.105-111
• /
• 2019

본 논문에서는 근접전계 시험을 수행하여 Ka 대역 밀리미터파 탐색기용 도파관 광벽 슬롯 배열 안테나의 성능 검증을 수행하였다. 슬롯 배열 안테나의 측정은 원전계, 근접전계 시험을 모두 수행하고 비교하여 밀리미터파 대역의 근접전계 시험의 유효성을 확인하였다. 검증을 수행한 슬롯 배열 안테나의 빔폭 및 부엽 준위를 포함한 빔 패턴 특성이 동일함을 확인하였다. 방위각, 고각 빔패턴의 부엽준위 차이는 1dB 이내로 검증되었다. 추가로 back-projection 기법을 활용하여 근접전계 데이터를 가공한 후 안테나 개구면의 분포를 새롭게 추출하여 배열 안테나 성능 분석을 수행하는 방법에 대하여 소개하였다.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.51-57
• /
• 2001

A light beam reflected from a machined surface generally containes information concerning about its surface roughness. This study examines and proposes a surface roughness measurement technique for on-machine measurement of machined surfaces. The technique is based on the measurement of a reflected laser beam pattern and the statistical analysis of its light intensity distribution. The surface roughness was found to be closely related to the standard deviation of the light intensity on the primary axis of the reflected pattern. An image acquisition device is made up of a laser diode, a half mirror, a screen, and a CCD camera. The exact image with the primary and secondary axes of a reflected laser beam pattern is calculated through such image processing algorithm as thresholding, edge detection, image rotation, segmentation, etc. A median filter and a surrounding light correction algorithm are improve the image quality and reduce the measuring error. Using the developed measuring device the effect of screen materials and workpiece and workpiece materials was investigated. Experimental results regarding to relatively high-quality surfaces machined by grinding, polishing, lapping processes have shown the measurement error is within 10% in the range of $0.1{mu}m~0.8{\mu}m R_q.$Therefore, the proposed method is thought to be effectively used when quick measurements is needed with workpieces fixed on the machine.

• 한국전자파학회논문지
• /
• 제26권5호
• /
• pp.514-520
• /
• 2015

부엽 잡음 재머 제거를 위한 SLC(Sidelobe Canceller, 부엽제거기)는 주 채널(합 채널) 빔 패턴에 의한 수신 신호 외에 보조 채널 빔 패턴에 의한 수신 신호를 요구한다. 적응형 SLC가 최상의 부엽 잡음 재머 제거 성능을 발휘하기 위해서는, 주 채널 빔 패턴의 부엽에 해당하는 고각/방위각 영역에서 각각의 보조 채널 빔 패턴의 우세한 이득(gain)을 보이는 영역이 서로들 겹치지 않게 되어야 한다. 그리고 주 채널 빔 패턴의 주엽에 해당하는 영역에서 보조 채널 빔 패턴들이 낮은 이득을 보여야 한다. 모노펄스 레이더에서 모노펄스 처리용 차 채널들의 빔 패턴들은 이러한 특성을 가지고 있다. 본 논문에서는 부엽 제거를 위한 보조 채널로서 모노펄스 처리용 차 채널을 이용하는 방법을 제안하고, 제안한 방법의 SLC 성능 분석 및 시뮬레이션 결과를 보였다. 모노펄스 레이더에서 모노펄스 처리용 차 채널의 빔으로 SLC를 구현하면 추가적인 채널 구성없이 기본적으로 사용되는 합, 차 채널들을 이용하여 SLC를 구성할 수 있다.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.70-77
• /
• 2007

The application of focused ion beam(FIB) technology has been broadened in the fabrication of nanoscale regime. The extended application of FIB is dependent on complicated reciprocal relation of operating parameters. It is necessary for successful and efficient modifications on the surface of silicon substrate. The primary effect by Gaussian beam intensity is significantly shown from various aperture size, accelerating voltage, and beam current. Also, the secondary effect of other process factors - dwell time, pixel interval, scan mode, and pattern size has affected to etching results. For the process analysis, influence of the secondary factors on FIB micromilling process is examined with respect to sputtering depth during the milling process in silicon material. The results are analyzed by the ratio of signal to noise obtained using design of experiment in each parameter.