• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.83-91
• /
• 2019

The BX composite beam is designed to have the same cross-section regardless of the size of the momentum, which is a disadvantage of the existing steel structure. Combination of the H-beam end compressive material and the H-section steel tensile reinforcement according to the moment size in a single span, It is possible to say that it is an excellent synthesis which increases the performance. When underground and overhead structures are constructed, it is possible to reduce the bending, increase lateral stiffness, reduce construction cost, and simplify joints. The seamability of the joining part is a simple steel composite beam because of the decrease of the beam damping at the center of the beam and the use of the end plate of the new end compressing material. In the case of structures with long span structure and high load, it is advantageous to reduce the material cost by designing large steel which is high in price at less than medium steel.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.93-100
• /
• 2021

Three factors that degrade the accuracy of modal decomposition are extensively studied using simulated and measured beams. These include a beam size mismatch, beam center mismatch, and signal-to-noise ratio of the images. The beam size and beam center are scanned using simulated noisy beams, and the result of the modal decomposition is compared with that of real beams. Based on the suggested procedure, error functions of approximately 1-4 × 10-3 can be acquired for real beams. This study provides important information regarding the impact of the three factors on the practical modal decomposition and tolerances of a mismatch, helping estimate the achievable values of the error function in a real beam modal decomposition.

• Journal of Electrochemical Science and Technology
• /
• 제6권3호
• /
• pp.75-80
• /
• 2015

We introduce a new synthesis method to prepare small TiO₂ nanoparticles with a narrow particle size distribution, which is achieved by electron beam (E-beam) irradiation. The effects of E-beam irradiation on the synthesis of TiO₂ nanoparticles and the electrochemical performance of TiO₂ nanoparticles as alternative anode materials for Li-ion batteries are investigated. The TiO₂ nanoparticles induced by E-beam irradiation present better cycling performance and rate capability than the TiO₂ nanoparticles synthesized by normal hydrolysis reaction. The better electrochemical performance is attributed to small particle size and narrow particle size distribution, resulting in the large surface area that provides innumerable reaction sites and short diffusion length for Li⁺ through TiO₂ nanoparticles.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.129-136
• /
• 2002

Electric vehicle body has to be subjected to uniform load and demand auxiliary equipment such as air pipe, electric wire pipe and gas pipe. Especially, lightweight vehicle body is salutary to save operating costs and fuel consumption. Cross beam supports the weight of passenger and electrical equipments and account for the most of weight of vehicle body. Therefore this study performs the size and the shape optimization of crossbeam for electric vehicle using GENESIS 7.0 and presents the effect of mass reduction and the shape of hole in cross beam.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.82-91
• /
• 1996

The maximum butt-joint gap size in $CO_2$ laser beam welding of SAPH steel plates with different thicknesses and its bending formability were studied. In the range of the gap size$\geq$0.1mm, the optimal butt welding speed was faster than that of no gap (air gap) condition. This behaviour was independent on the difference of thickness at any combination. Also, the allowable gap size in steel plates with different thicknesses was larger than with same thicknesses. In the range of $T/T_0$(bead shape) $\geq$ 0.8, good bending formability was obtained at any combination of thickness. The formability was improved by reducing the hardness in weld bead using pre-heating process. Finally, FEM result of the laser beam welded underframe with different thicknesses was compared to that of the conventional spot welded underframe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2263-2265
• /
• 2000

본 연구에서는 광 픽업의 소형, 경량 제작을 위해 MEMS 기술을 이용하여 planar micro optics 방법으로 광 픽업을 구성하는 micro lens, actuator, beamsplitter 등을 설계, 제작하고 집적화한 픽업헤드를 구성하여 그 특성을 분석하였다. 특성분석 결과 disk에 focusing 되는 beam의 형상은 circle type의 비교적 양호한 결과를 얻을 수 있었고 beam spot size는 약 22$\mu m$로 실제 system에서 요구되는 0.9$\mu m$이내의 beam spot size에 비해 약 25배 가량 큰 beam spot size를 얻을 수 있었다.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.209-216
• /
• 2008

The application of focused ion beam (FIB) depends on the optimal interaction of the operation parameters between operating parameters which control beam and samples on the stage during the FIB deposition process. This deposition process was investigated systematically in C precursor gas. Under the fine beam conditions (30kV, 40nm beam size, etc), the effect of considered process parameters - dwell time, beam overlap, incident beam angle to tilted surface, minimum frame time and pattern size were investigated from deposition results by the design of experiment. For the process analysis, influence of the parameters on FIB-CVD process was examined with respect to dimensions and constructed shapes of single and multi- patterns. Throughout the single patterning process, optimal conditions were selected. Multi-patterning deposition were presented to show the effect of on-stage parameters. The analysis have provided the sequent beam scan method and the aspect-ratio had the most significant influence for the multi-patterning deposition in the FIB processing. The bitmapped scan method was more efficient than the one-by-one scan type method for obtaining high aspect-ratio (Width/Height > 1) patterns.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 한국광학회지
• /
• 제4권1호
• /
• pp.9-14
• /
• 1993

Amplitude filter와 phase filter가 결합된 CFAP(Combined Filter of Amplitude and Phase)의 결상 특성을 조사하기 위해 Bessel beam을 도입하였다. 이 논문에서는 무수차계와 수차를 포함하는 광학계에 대한 PSF와 encircled energy(E), transmission ratio(TR), gain(G)을 Bessel beam의 node수에 따라 계산하였다. 이 결과 Bessel beam은 amplitude filter와 다른 PSF 특성을 보였으며, 또한 구면수차가 포함된 경우 compensating effect가 크게 나타났다. 특히 Bessel beam의 central spot의 size가 Airy disk 반경보다 적게 나타나므로, 고집적 반도체 소자 제작에 이용가능하리라 생각된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권4호
• /
• pp.159-171
• /
• 1998

This study attempts to develop a rational approach to flexural concrete beam analysis with crack growth. In order to develope analytical solutions, several simplification and assumption are made and the Hillerborg fictitious crack model is adapted for new rational approach to the flexural concrete beam. To provide desired results, the concrete beams with various conditions(more than 126 beam conditions) are analyzed. Before producing the results, these assumptions are founded to be justified by comparison with a FE analysis. The results for each condition of the beams are presented in terms of crack lengths, the strength and cracking stability of concrete beams. And also size effects in a flexural concrete beam is studied using a new flexural cracking model.