Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Influence of Parameters Controlling Beam Position On-Sample During Deposition Patterning Process with Focused Ion Beam

빔 위치 관련 제어인자가 집속이온빔 패턴 증착공정에 미치는 영향

  • Published : 2008.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The application of focused ion beam (FIB) depends on the optimal interaction of the operation parameters between operating parameters which control beam and samples on the stage during the FIB deposition process. This deposition process was investigated systematically in C precursor gas. Under the fine beam conditions (30kV, 40nm beam size, etc), the effect of considered process parameters - dwell time, beam overlap, incident beam angle to tilted surface, minimum frame time and pattern size were investigated from deposition results by the design of experiment. For the process analysis, influence of the parameters on FIB-CVD process was examined with respect to dimensions and constructed shapes of single and multi- patterns. Throughout the single patterning process, optimal conditions were selected. Multi-patterning deposition were presented to show the effect of on-stage parameters. The analysis have provided the sequent beam scan method and the aspect-ratio had the most significant influence for the multi-patterning deposition in the FIB processing. The bitmapped scan method was more efficient than the one-by-one scan type method for obtaining high aspect-ratio (Width/Height > 1) patterns.

Keywords

References

  1. Tseng, A. A., 2004, 'Recent Developments in Nanofabrication Using Focused Ion Beams,' J. Micromechanics and Microengineering, Vol. 14, pp. R15-R34 https://doi.org/10.1088/0960-1317/14/4/R01
  2. Gamo, Kenji, 1997, 'Recent Advances of Focused Ion Beam Technology,' Nuclear Instruments and Methods in Physics Research B, Vol. 121, pp. 464-469 https://doi.org/10.1016/S0168-583X(96)00387-4
  3. Shin, Y-H., Yoon, Y-H., Lee, E-S., Han, C-S., 2007, 'Improvement of the Carbon Nanotube Tip by Focused Ion Beam and its Performance Evaluation,' Trans. of the KSME(A), Vol. 31, pp. 139-144 https://doi.org/10.3795/KSME-A.2007.31.1.139
  4. Fu, Y. Q., Bryan, N. K. A., Shing, O. N. and Hung, N. P., 2000, 'Influence of the Redeposition Effect for Focused Ion Beam 3D Micromaching in Silicon,' Advanced Manufacturing Technology, Vol. 16, pp. 877-880 https://doi.org/10.1007/s001700070005
  5. Heuvel, F. C. van den, Overwijk, M. H. F., Fleuren, E. M., Laisina, H. and Sauer, K. J., 1993, 'Focused-ion-beam-induced Tungsten Deposition for IC Repair,' Microelectronic Engineering, Vol. 21, pp. 209-212 https://doi.org/10.1016/0167-9317(93)90057-C
  6. Fu, Y. Q., Bryan, N. K. A., Shing, O. N., and Wyan, H. N. P., 2000, 'Influence Analysis of Dwell Time on Focused Ion Beam Micromachining in Silicon,' Sensors and Actuators, Vol. 79, pp. 230-234 https://doi.org/10.1016/S0924-4247(99)00282-4
  7. Kim, H. B., 2005, 'A Concept of Variable Dwell Time in Focused Ion Beam Nano Fabrication,' Conference of the KSMTE, pp. 51-56
  8. Hausmann, S., Bischoff, L., Teichert, J., Grambole, D., Hermann, F. and Moller, W., 1998, 'Investigation of Dwell-Time Effects on the Cobalt Disilicide Formation Using Focused Ion Beam Implantation,' Microelectronic Engineering, Vol. 41/42, pp. 233-236 https://doi.org/10.1016/S0167-9317(98)00053-7
  9. Prestigiacomo, M., Roussel, L., Houel, A., Sudraud, P., Bedu, F., Tonneau, D., Safarov, V. and Dallaporta. H., 2004, 'Studies of Structures Elaborated by Focused Ion Beam Induced Deposition,' Microelectronic Engineering, Vol. 76, pp. 175-181 https://doi.org/10.1016/j.mee.2004.07.047
  10. Cairney, J. M. and Munroe, P., 2003, 'Redeposition effects in Transmission Electron Microscope Specimens of FeAl-WC Composites Prepared using a Focused Ion Beam,' Micron, Vol. 34, pp. 97-107 https://doi.org/10.1016/S0968-4328(03)00007-6