• 한국위성정보통신학회논문지
• /
• 제10권2호
• /
• pp.75-79
• /
• 2015

본 연구에서는 폴리이미드 박막위에서의 수직 및 수평배향에서 혼합액정의 배향 특성에 대해서 연구하였다. 혼합액정은 러빙을 이용하여 배향처리하였으며, 러빙에 사용된 폴리이미드 박막은 알킬기를 Side Chain으로 가진 수직배향용 배향막과 그렇지 배향막으로 나누어서 프리틸트각 특성을 측정하였다. 실험결과 혼합액정을 사용하여 양호한 배향상태를 얻을 수 있었으며, 고온에서의 열 안정성에서도 우수한 특성을 보이는 것을 알 수 있었다. 또한 프리틸트각의 발생 원리를 이해하기 위해서 접촉각 측정을 실시하였으며, 이 둘이 밀접한 상관관계를 갖고 있음을 알 수 있었다

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.90-95
• /
• 2023

We describe an optimal alignment method for improving accuracy of dynamic spectroscopic polarimeter based on monolithic polarizing interferometer. The dynamic spectroscopic polarimeter enables real-time measurements of spectral ellipsometric parameters by using a spectral carrier frequency concept. However, the non-polarizing beam splitter used in the monolithic polarizing interferometer cannot maintain the polarization state perfectly due to phase retardation caused by optical anisotropic characteristics of the non-polarizing beam splitter, resulting in degraded measurement accuracy. The effect of the beam splitter can be minimized through optimal alignment of the polarizers used in the polarizing interferometer and the analyzer. We demonstrate how much the proposed alignment method can enhance the measurement accuracy by comparing with previous alignment approach.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.776-779
• /
• 2006

The alignment of liquid crystal (LC) is one of the key issues of liquid crystal display (LCD) technologies. In this study, we aligned polyimide (as the LC alignment layer) by ALT plasma beam and to realize the stability and characteristics of this technology. The characteristics such as anchoring energy, pre-tilt angle, voltage holding ratio(VHR) and residual direct current(Rdc) were discussed. Besides, we applied it to the in plane switch (IPS) mode 23" WXGA real panel, the performance parameters and electrical properties were measured and compared with those of rubbing alignment. From the result, we demonstrated a successful LC alignment treatment process in real panel by ALT plasma beam.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.468-470
• /
• 2005

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability makes SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by ion beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is main-tained by the ion beam alignment method on the SiC thin film surface at high annealing temperatures up to 300.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1024-1027
• /
• 2005

By using $45^{\circ}$ obliqued evaporation method with electron beam system, uniformly vertical liquid crystal (LC) alignment was achieved. And a high pretilt angles of about $2.5^{\circ}$ were measured. Also, it was verified that there are no variations of pretilt angle as a function of $SiO_x$ thin film thickness 20 nm and 50 nm. A good LC alignment states were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment by $45^{\circ}$ obliqued electron beam evaporation method on the $SiO_x$ thin film can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.288-289
• /
• 2006

The tilt angle generation of nematic liquid crystal(NLC) on the homeotropic polyimide(PI) surface by the new Ion beam alignment method is studied. The tilt angle of NLC on the homeotropic PI surface for all incident angle is about 38and this has a stabilization trend. And the good LC alignment of the NLC on the PI surface by ion beam exposure of 45Incident angle was observed. Also the tilt angle of NLC on the homeotropic PI surface by ion beam exposure of 45Incident angle had a tendency to decrease as ion beam energy density increase. So we had known that pretilit angle could be controlled from verticality to horizontality.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.398-398
• /
• 2007

Most recently, the Liquid Crystal (LC) aligning capabilities achieved by ion beam exposure on the diamond-like carbon (DLC) thin film layer have been successfully studied. The DLC thin films have a high mechanical hardness, a high electrical resistance, optical transparency and chemical inertness. Nitrogen doped Diamond Like Carbon (NDLC) thin films exhibit properties similar to those of the DLC films and better thermal stability than the DLC films because C:N bonding in the NDLC film is stronger against thermal stress than C:H bonding in the DLC thin films. Moreover, our research group has already studied ion beam alignment method using the NDLC thin films. The nematic liquid crystal (NLC) alignment effects treated on the SiNx thin film layers using ion beam irradiation for three kinds of N rations was successfully studied for the first time. The SiNx thin film was deposited by plasma-enhanced chemical vapor deposition (PECVD) and used three kinds of N rations. In order to characterize the films, the atomic force microscopy (AFM) image was observed. The good LC aligning capabilities treated on the SiNx thin film with ion beam exposure for all N rations can be achieved. The low pretilt angles for a NLC treated on the SiNx thin film with ion beam irradiation were measure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.185-185
• /
• 2009

The aligned liquid crystals (LCs) display on SiNx thin films using ion-beam (IB) irradiation was studied with controllability ofpretilt angle depending on incident energies of the IB. Plasma-enhanced chemical vapor deposition (PECVD) was used to orient the LCs on SiNx alignment films. The LCs alignment property for the SiNx thin films were observed to verify the practical application potential (figure1). A good LCs alignment of vertical alignment LCs cells on SiNx thin film surfaces irradiated with incident IB energy of 1800eV was achieved. Also, a good LC alignment by the IB irradiation on the SiNx thin film surface was observed at an annealing temperature of $180^{\circ}C$. However, the alignment defects of the nematic liquid crystal was observed at an annealing temperature above $230^{\circ}C$. The atomic force microscopy (AFM) images of LCs on SiNx thin film surfaces irradiated with IB energy was used for the surface analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.136-139
• /
• 2003

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a-C:H thin film as working gas at 30W rf bias condition. A high pretilt angle of about $5^{\circ}$ by ion beam(IB) exposure on the a-C:H thin film surface was measured. A good LC alignment by the IB alignment method on the a-C:H thin film surface was observed at annealing temperature of $250^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $300^{\circ}C$. Consequently, the high LC pretilt angle and the good thermal stability of LC alignment by the IB alignment method on the a-C:H thin film surface as working gas at 30W rf bias condition can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.23-26
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a Carbon Nitride (NDLC) thin film. NDLC thin film exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) thin films. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. A high pretilt angle of about $9.9^{\circ}$ by ion beam (IB) exposure on the NDLC thin film surface was measured. A good LC alignment is achieved by the IB alignment method on the NDLC thin film surface at annealing temperature of $200^{\circ}C$. The alignment defect of the NLC was observed above annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good LC alignment by the IB alignment method on the NDLC thin film surface can be achieved.