• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.696-702
• /
• 2007

The effect of different steamed garlic powder concentrations on sponge cake quality were investigated by analyzing both physicochemical and sensory properties. The sponge cakes were mixed with either steamed and freeze-dried garlic powders at different ratio [0, 2, 4, 6, 8 and 10 % (w/flow w)]. The density of the prepared dough increased with increasing amounts of steamed garlic powder when the concentrations were over 4%. The heights of the sponge cakes ranged from $3.53{\pm}0.12{\sim}3.60{\pm}0.15cm$ in the $4{\sim}8%$ steamed garlic powder samples, and were significantly higher than the control. The specific loaf volume of the cake was $3.86{\pm}0.07mL/g$ the highest in the 4% steamed garlic powder samples. When the garlic powder concentration was over the 6%, the specific loaf volumes of the sponge cakes decreased with increases in garlic powder contents. The measured L- and b-values of the crust were significantly decreased with increasing garlic powder concentration while the a-value gradually increased. The L-value of the crumb increased with increasing steamed garlic powder concentration, especially at concentrations greater than 4%. The a-values were higher in the steamed garlic powder treatments than in the control. however, no significant differences were found in the concentrations over 4%. The hardness of the control was $812.42{\pm}56.69g/cm^2$, whereas it ranged from $1005.36{\pm}43.65{\sim}1522.78{\pm}204.95g/cm^2$ in the experimental groups. Hardness increased with increasing garlic powder concentration. When considering moistness, overall acceptability, and other characteristics, the optimal concentration of steamed garlic powder was found to be 4%.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.890-898
• /
• 2016

The purpose of this paper is to investigate potential anti-inflammatory and anti-oxidant effects of Tenebrio molitor. Macrophage cell response by outside stimulation leads expression of pro-inflammatory cytokines, such as tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$), interleukin-6 (IL-6), $interleukin-1{\beta}$ ($IL-1{\beta}$), and trigger expression of genes which are affected by inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2), resulting in formation of inflammatory factors like nitric oxide (NO) and Prostaglandin $E_2$ (PGE2). Cell viability was determined by MTT assay. In order to investigate anti-inflammatory agents, the inhibitory effects on the production of lipopolysaccharide (LPS)-induced NO in RAW 264.7 cells were examined. T. Molitor significantly decreased the production of NO in a dose-dependent manner, and also reduced the expression of iNOS, a COX-2 protein. As a result, the levels of protein such as $PGE_2$, iNOS, COX-2 and MARKs were significantly reduced compared to non-treated group in T. Molitor water extract (TDW) treated group. Also, antioxidant effect of T. Molitor were investigated using DPPH, ABTS+ and superoxide anion radical scavenging activity tests in cell-free system. Antioxidant activity of T. molitor was found low in the DPPH radical scavenging test while high in the ABTS+ and superoxide anion radical scavenging activity tests. These results show that TDW could be an effective anti-pro-inflammatory and anti-oxidant agent.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.49-62
• /
• 2013

The Dongmakgol Tuff is divided into 8 lithofacies based on their grain size and depositional structures: massive tuff breccia(TBm), welded tuff and lapilli tuff(LTw), rheomorphic tuff and lapilli tuff(LTr), massive lapilli tuff(LTm), stratified lapilli tuff(LTs), gradedly bedded lapilli tuff(LTg), crudely bedded lapilli tuff(LTb) and massive fine tuff(Tm). They can be divided into 3 pyroclastic rock group based on their constituents of the lithofacies. The lower group(LI) is composed of LTm, LTw and LTr, which are interpreted to have resulted from emplacement of voluminous pyroclastic flows due to ignimbrite-form eruption to boiling-over eruption. The middle group(LT+MI) consists of LTs, LTg and LTm associated with Tm in the lower part, and of LTm, LTw and LTr in the middle and upper parts; these suggest that started with deposition of pyroclastic surges from phreatoplinian eruption by poor eternal water, passed through emplacement of pyroclastic flows from ignimbrite-form eruption and ended with deposition of voluminous pyroclastic flows from boiling-over eruption. The upper group(lUT+uUT+UI) is composed of LTs, LTg and Tm in the lowermost, TBm, LTb, LTb and Tm in the lower part, and LTm and LTw in the middle and upper part, suggesting that began with deposition of surges from phreatoplinian eruption, passed through deposition of pumice- and ash-fallouts from plinian eruption and transformed into emplacement of pyroclastic flows due to boiling-over eruption. As result, eruptive processes in the Dongmakgol Tuff approximately began with phreatoplinian or/and plinian eruption, transformed into ignimbrite-forming eruption and proceeded into boiling-over eruption in each volcanism, but proceeded presumably without phreatoplinian or plinian eruption in the earlier stage of 1st volcanism.

• Journal of Life Science
• /
• v.22 no.11
• /
• pp.1493-1499
• /
• 2012

The level of genetic variation and relationships in three native Korean goat populations (Dangjin, Jangsu, and Tongyeong) as well as the populations of a farm were analyzed, based on 30 microsatellite markers. A total of 277 distinct alleles were observed across the four goat populations, and 102 (36.8%) of these alleles were unique to only one population. The mean observed heterozygosity and polymorphism information content were calculated as 0.461~0.651 and 0.462~0.679, respectively. In the NJ tree constructed based on Nei's $D_A$ genetic distance, the four populations represented four distinct groups. However, the genetic distances between each Korean native goat population and the farm population were two times those among the three native Korean breeds. The genetic structure within the three Korean native goat populations was also investigated. Cluster analysis, using the STRUCTURE software, suggested three clusters. The molecular information of genetic diversity and relationships in this study will be useful for the evaluation, conservation, and utilization of native Korean goat breeds as genetic resources.

• Journal of Life Science
• /
• v.24 no.3
• /
• pp.242-251
• /
• 2014

The objective of this study was to isolate a photosensitizer from Pueraria thunbergiana leaves that induces apoptosis in SK-HEP-1 cells. Column chromatography and thin layer chromatography were used to isolate active compounds from extracts of P. thunbergiana leaves. The structures of the isolated compounds were determined by 1D-NMR, 2D-NMR, and FAB-mass spectroscopy. A substance, named M4-3, was purified from the leaves of P. thunbergiana using various chromatography methods, and the absorbance of the substance was measured. The absorbance was highest at 410 nm, suggesting that the M4-3 substance was a different compound from chlorophyll a and b, which absorb at 410, 502, 533, and 607 nm. Further analyses revealed that the M4-3 compound was a $13^2$-hydoxy pheophorbide, a methyl ester with a molecular weight of 662. M4-3 was identified as a derivative compound of pheophorbide, with a structure that magnesium comes away from the porphyrin ring. The results of the analysis of the cytotoxicity of the M4-3 substance against the SK-HEP-1 cells revealed that it inhibited rates of cell growth by 40% and 80% at a concentration of 0.04 ${\mu}M$ and 0.08 ${\mu}M$, respectively. The M4-3 compound was found to be a photosensitizer for cytotoxicity because it was appeared only in light condition as examining activity in different irradiation conditions (light condition and nonlight condition) under the same concentration. Analysis of morphological changes in the cells following cell death induced by exposure to the M4-3 substance reveled representative phenomena of apoptosis (nuclear condensation, vesicle formation, and fragmentation of DNA). The induction of apoptosis was attributed to the compound's photodynamic activity.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.616-621
• /
• 2013

Aconitum pesudo-laeve var erectum has been known to possess anti-inflammatory activity and modulate the intestinal immune system. In addition, it has traditionally been used for the treatment of water retention in the body. In this study, the anti-aging and anti-diabetes effects of water and ethanol extracts from Aconitum pesudo-laeve var. erectum were investigated. The activities of each extract were measured by antioxidant tests such as DPPH and ABTS radical scavenging activity, antioxidant protection factor (PF), TBARs content, and ${\alpha}$-amylase and ${\alpha}$-glucosidase inhibition activity assay. DPPH radical scavenging activity was found in over 50% of water and ethanol extracts at $100{\mu}g/ml$, $50{\mu}g/ml$, respectively. The ABTS radical scavenging activity of ethanol extract was $99.8{\pm}0.1$% at $1,000{\mu}g/ml$ in water, which was highest among the ethanol extract concentrations. PFs measured with ${\beta}$-carotene-linoleate model systems were in the order of ethanol (1.49 PF at $1,000{\mu}g/ml$) > ethanol (1.40 PF at $500{\mu}g/ml$) > water (1.33 PF at $1,000{\mu}g/ml$) > water (1.27 PF at $500{\mu}g/ml$). TBARs content in ethanol extracts ($1,000{\mu}g/ml$) was $0.16{\pm}0.03{\mu}M$, which was lower than that of water extracts and other ethanol extract concentrations. The extracts also showed over 90% of ${\alpha}$-amylase inhibition and over 60% of ${\alpha}$-glucosidase inhibition ratio in water ($1,000{\mu}g/ml$) and ethanol extracts (100~$1,000{\mu}g/ml$). These results suggest that Aconitum pesudo-laeve var. erectum extracts could be used as a cosmetic source and preventive agent for aging and diabetes.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.947-955
• /
• 2020

The foot-and-mouth disease virus (FMDV), a member of the Aphthovirus genus in the Picornaviridae family, affects wild and domesticated ruminants and pigs. During replication of the FMDV RNA (ribonucleic acid) genome, FMDV-encoding RNA polymerase 3D acts in a highly location-specific manner. This suggests that specific RNA structures recognized by 3D polymerase within non-coding regions of the FMDV genome assist with binding during replication. One such region is the cis-acting replication element (CRE), which functions as a template for RNA replication. The FMDV CRE adopts a stem-loop conformation with an extended duplex stem, supporting a novel 15-17 nucleotide loop that derives stability from base-stacking interactions, with the exact RNA nucleotide sequence of the CRE producing different RNA secondary structures. Here, we show that CRE sequences of FMDVs isolated in Korea from 2010 to 2017 exhibit A and O genotypes. Interestingly, variations in the RNA secondary structure of the Korean FMDVs are consistent with the phylogenetic relationships between these viruses and reveal the specificity of FMDV infections for particular host species. Therefore, we conclude that each genetic clade of Korean FMDV is characterized by a unique functional CRE and that the evolutionary success of new genetic lineages may be associated with the invention of a novel CRE motif. Therefore, we propose that the specific RNA structure of a CRE is an additional criterion for FMDV classification dependent on the host species. These findings will help correctly analyze CRE sequences and indicate the specificity of host species for future FMDV epidemics.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.951-955
• /
• 1999

Two-phase Al-21Ti-23Cr alloy containing 20 vol.% $\textrm{Cr}_{2}\textrm{Al}$ as a second phase in the $Ll_2$ matrix is located in the two- phase region of the Al- Ti- Cr phase diagram at $1150^{\circ}C$, while in the three-phase region at $1000^{\circ}C$. Based on this result, the mechanical properties of the A1-21Ti-23Cr alloy were enhanced through the refined precipitation of the third phase in the $Ll_2$ matrix by aging the alloy below $1000^{\circ}C$. It was observed that a several ,m of the third phase precipitated in the $Ll_2$ matrix through aging at $800^{\circ}C$ and $1000^{\circ}C$, but the precipitation was not observed below $600^{\circ}C$. Furthermore, the third phase was more finely precipitated at $800^{\circ}C$ than at $1000^{\circ}C$. Although the third phase precipitated at $800^{\circ}C$ and at $1000^{\circ}C$, the compressive yield strength increased rapidly at $800^{\circ}C$ only. This is probably attributable to the refined precipitation of the third phase in the $Ll_2$ matrix. It is expected that the precipitation of the third phase. which was confirmed to be the TiAlCr phase, improves the mechanical properties by preventing crack propagation in the $Ll_2$ matrix.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.840-850
• /
• 2010

The present study was attempted to find the effects of structural properties of phosphorus on the water quality of Gyehwa reservoir in Saemangeum. Relationship of phosphorus fractions between water and sediment properties was closely examined, and a few types of phosphorus were found from the sample sediment as : Saloid-P, Al-P, Fe-P, Ca-P, Red-P and Occd-P. Saloid-P (1.4%), Al-P (0.5%), Fe-P (39.8%), Ca-P (56.6%), Red-P (0.4%), Occd-P (1.3%) were extracted in a mass basis from the sediment of Gyehwa reservoir. Approximately more than 97% of phosphorus were calcium related phosphorus (Ca-P, 56%) and iron bound phosphorus (Fe-P, 39.8%). The Fe-P closely relates with water quality of T-N (r=0.761, p<0.05), $NO_3$-N (r=0.754, p<0.05), $NH_4$-N (r=0.728, p<0.05), T-P (r=0.774, p<0.05) and $PO_4$-P (r=0.767, p<0.05) while the Ca-P did not show any consistent dependency on the water quality. On the other hand, the correlation of Ca-P with $P_2O_5$ was high with r=0.783 (p<0.05) in the sediment. The Fe-P was affected significantly on the Ignition Loss (r=0.569, p<0.05), T-N (r=0.715, p<0.05) and T-P (r=0.983, p<0.01). In the research of correlation between phosphorus fraction and heavy metals in the sediment, Ca-P did not show any specific relationships with heavy metals. The Fe-P showed a significant correlation with As (r=0.817, p<0.01), Cu (r=0.793, p<0.05), Cd (r=0.786, p<0.05), Zn (r=0.738, p<0.05), so that it can be stated that the presence of Fe-P may implicate the volume of various metallic elements.