• The Pure and Applied Mathematics
• /
• v.28 no.3
• /
• pp.217-234
• /
• 2021

In this paper, first we introduce the new class of HV-BE-algebra as a generalization of a (hyper) BE-algebra and prove some basic results and present several examples. Then, we construct the HV-BE-algebra associated to a BE-algebra (namely BL-BE-algebra) based on "Begins lemma" and investigate it.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.135-140
• /
• 2011

By investigating photoluminescence (PL) spectra (20 K) of undoped and Be-doped p-type GaSb/GaAs epilayers, the origin has been analyzed by the change due to doping density. We have observed that the PL peak shifts to higher energy and the full-width half-maximum (FWHM) decreases with increasing the doping density below ${\sim}10^{17}cm^{-3}$, contrasted to shift to low energy and increasing FWHM above the density of ${\sim}10^{17}cm^{-3}$. From the variation of the integrated PL intensities of three peaks dissolved by Gaussian fit, it has been analyzed that, as the density increases, the $Be[Be_{Ga}]$ acceptor level (0.794 eV) reduces, whereas the intrinsic defect of $A[Ga_{Sb}]$ (0.778 eV) enhances together with a new $Be^*$ level (0.787 eV) locating between A and Be. We have discussed that it is due to coexistence of the Be acceptor level (${\Delta}E=16meV$) and the complex level (${\Delta}E=23meV$), $Be^*[Ga_{Sb}-Be_{Ga}]$combined by Be and A, in Be-doped p-GaSb, and that the level density of $Be[Be_{Ga}]$ may be reduced above ${\sim}10^{17}cm^{-3}$.

• Journal of Korea Foundry Society
• /
• v.18 no.4
• /
• pp.357-363
• /
• 1998

Microstructure of A356 aluminium alloys cast in a permanent mold was investigated by optical microscope and image analyzer, with particular respect to the shape and size distribution of iron intermetallics known as ${\beta}-phase$ ($Al_5FeSi$). Morphologies of the ${\beta}-phase$ was found to change gradually with the Be:Fe ratio like these. In Be-free alloys, ${\beta}-phase$ with needlelike morphology was well developed, but script phase was appeared when the Be:Fe ratio is above 0.2:1. With the Be:Fe ratios of 0.4:1-1:1, script phase as well as Be-rich phase was also observed. In case of higher Be addition, above 1:1, Be-rich phase was observed on all regions of the specimens, and increasing of the Be:Fe ratios gradually make the Be-rich phase coarse. It was also observed that the ${\beta}-phase$ with needlelike morphology was coarsened with increase of the Fe content in Be-free alloys. However, in Be-added alloys, length and number of these ${\beta}-phases$ were considerably decreased with the increased Be:Fe ratio. It was concluded that Fe impurity element to be crystallized into needlelike intermetallics was tied up by Be addition element, and new phases were crystallized into script or Be-rich intermetallics.

• Journal of applied mathematics & informatics
• /
• v.33 no.5_6
• /
• pp.579-591
• /
• 2015

Properties of prime filters are studied in BE-algebras as well as in commutative BE-algebras. An equivalent condition is derived for a BE-algebra to become a totally ordered set. A condition L is introduced in a commutative BE-algebra in ordered to study some more properties of prime filters in commutative BE-algebras. A set of equivalent conditions is derived for a commutative BE-algebra to become a chain. Some topological properties of the space of all prime filters of BE-algebras are studied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.167-167
• /
• 2010

반도체는 도핑하지 않으면 대부분 n형을 나타내는 것에 반하여 GaSb는 p형을 보이는 반도체로서, 그 근원은 명확하게 규명되어 있지 않은 상태이다. GaSb의 p형 불순물인 Be은 Ga과 치환 ([$Be_{Ga}$])되므로, p형 전도의 근원으로 추정되는 잔존결함인 [$Ga_{Sb}$]와 그 복합체인 [$Ga_{Sb}-Sb_{Ga}$]와 높은 상관관계를 가질 것으로 예측된다. 본 연구에서는 Be을 도핑한 GaSb:Be 에피층을 MBE 방법으로 성장하여, PL 스펙트럼과 Hall 효과 분석을 통하여 p형 전도의 근원을 조사하였다. 도핑하지 않은 u-GaSb는 DA (deep acceptor)와 함께 A 준위를 나타낸 반면, p-GaSb:Be의 PL 스펙트럼은 Be 도핑농도가 증가함에 따라 FWHM가 줄어들면서 점차 높은 에너지 영역으로 변위하지만 농도가 가장 높은 시료에서는 PL의 FWHM가 증가하면서 에너지는 감소함이 관측되었는데, 이것은 A 피크와 Sb 관련 피크가 경쟁적으로 중첩되어 나타난 현상으로 분석된다. Hall 효과 결과는 유효 전하밀도의 증가에 따라 이동도는 감소하는 전형적인 의존성을 나타내었으며, u-GaSb의 Hall 이동도가 p-GaSb:Be의 값보다 작은 것은 u-GaSb에 잔존하는 DA에 의한 산란 때문으로 해석된다. Gaussian 형태로 분해하여 얻은 A ([$Ga_{Sb}$])와 DA ([$Ga_{Sb}-Sb_{Ga}$]) 및 Be 관련 피크로부터 특정 도핑농도 ($1.2{\times}10^{17}cm^{-3}$)의 시료를 제외한 모든 p-GaSb:Be에는 A 피크가 중첩되고 A와 Be 준위 중간에 Be과의 복합체인 중간상태(intermediate state)인 [$Be^*$]가 존재함이 관측되었는데, 특정 도핑농도에서는 [$Be_{Ga}$]이 우세하지만 더 이상 농도가 증가하면 [$Be_{Ga}$] 준위의 강도는 오히려 감소함을 관측할 수 있었다. 이것은 적정 이상의 Be을 도핑할 경우, A ([$Be_{Ga}$])와 $Be^*([Be_{Ga}-Ga_Sb}])$가 형성 ($A[Ga_{Sb}]+Be{\rightarrow}Be^*[Be_{Ga}-Ga_{Sb}]+[Be_{Ga}]$)됨을 보여 주는 중요한 결과인 것으로 분석된다. A, [Be], [$Be^*$] PL 피크 에너지는 각각 779, 787, 794 meV (오차범위 ${\pm}3\;meV$)이고, [$Be_{Ga}$]의 활성화 에너지는 ($23{\pm}3\;meV$) (20 K)임을 밝혔다.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.367-375
• /
• 1991

The clinical and radiographic features of 1,171 mesiodenses were studied with periapical radiograms and/or pantomograms in 942 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1980 to December 1989. The obrained results were as follows; 1. The incidence of mesiodens was higher in males (75.4%) than in females (24.6%). 2. In number of mesiodenses per individual, a single mesiodens was found to be 75.9%, 2-mesiodenses to be 23.8%, and 3-mesiodenses to be 0.2%. 3. In mesiodenses according to erupted and impacted status, the erupted mesiodens was found to be 16.5%, the impacted mesiodens in the interdental alveolar bone to be 66.6%, and in the region below root apex to be 16.9%. 4. In impacted mesiodenses according to direction of tooth crown, the inverted impaction was found to be 68.8%, the vertical impaction to be 15.1%, and the angulated impaction to be 16.1%. Among the impacted mesiodenses, a palatally located impaction was 87.5%, a middle 4.9%, and a labially 7.6%. 5. In mesiodenses according to shape of the tooth crown, a incisor-like type was found to be 1.6%, a canine-like type to be 6.8%, a conical type to be 79.2%, and a tuberculated type to e 12.4%. 6. In effect of mesiodens on adjacent tooth, non-specific influences were found to be 73.4%, crowding to be 0.3%, diastema to be 11.8%, rotation to be 5.7%, delayed eruption to be 3.8%, root resorption to be 2.6%, and dentigerous cyst to be 2.4%.

• Journal of the Korean Magnetics Society
• /
• v.14 no.6
• /
• pp.213-218
• /
• 2004

Be-codoped GaMnAs layers were systematically grown via molecular beam epitaxy with varying Mn- and Be-flux. Mn flux was controlled to cover from solid solution type GaMnAs to precipitated GaMnAs. Two Be flux were chosen to exhibit semiconducting and metallic resistivity in the grown layers. The structural, electrical, and magnetic properties of GaAs:(Mn, Be) were investigated. The lightly Be-codoped GaMnAs layers showed ferromagnetism at room temperature, but did not reveal magnetotransport due to small magneto-resistance and high resistance of the matrix. However, room temperature magnetotransport could be observed in the degenerate Be-codoped GaMnAs layers, and which was assisted by the high conductivity of the matrix. The Be-codoping has promoted segregation of new ferromagnetic phase of MnGa as well as MnAs.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.1
• /
• pp.885-892
• /
• 2001

The purpose at this study was comparied at effect the pulmonary function to breathing exercise(BE) in water with on land. The result was as follow: FVC(Forced Vital Capacity) was decreased 1.5% in control group, increased 1.5% in BE on land group and increased 6.5% in water group after BE, but no significant difference in water group. FEV1(forced expiratory volume at one second) was increased 0.2% in the control group, decreased 0.7% in BE on land group and increased 5.7% in BE in water group after BE, but no significant difference in water group. MVV(maximal voluntary ventilation) was significant difference in BE in water group who was increased 12.2% after BE. It was decreased 1.0% in the control group and increased 0.2% in BE on land group. VC(vital capacity) was decreased 1.5% in the control group, increased 6.2% in BE on land group and increased in BE in water group after BE, but no significant difference in water group. IC(Inspiratory Capacity) was decreased 0.5% in the control group, increased 7.5% in BE on land group and decreased 2.0% in BE in water group after BE, but no significant difference on land group. ERV(Expiratory Reserve Volume) was decreased 0.5% in the control group, increased 3.0% in BE on land group and increased 8.5% in BE in water group after BE, but no significant difference in water group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.113-119
• /
• 2006

Brazing is an important manufacturing process in the fabrication of Heavy Water Reactor fuel rods, in which bearing and spacer pads are joined to Zircaloy-4 cladding tubes. The physical vapor deposition(PVD) technique is currently used to deposit metallic Be on the surfaces of pads as a filler metal. Amorphous Zr-Be binary alloys which are manufactured by rapid solidification process are under developing to substitute the conventional PVD-Be coating. In the present study, brazed joint with PVD and amorphous alloys of $Zr_{1-x}Be_{x}(0.3{\le}x{\le}0.5)$ as filler metals are compared by mechanism, microstructure and hardness. The thickness of brazed joint with amorphous alloys became much smaller than that of PVD-Be. The erosion of base metal did not occur in the brazed joint with amorphous alloys. The brazing mechanism for PVD-Be seems to be Be diffusion into Zr-4 with capillary action resulting from eutectic reaction while that for amorphous alloys are associated with the liquid phase formation in the brazed joint. The brazed joint microstructure with PVD-Be consists of dendrite while that with amorphous alloys is globular. The $Zr_{0.7}Be_{0.3}$ alloy shows the smooth interface with little erosion in the base metal and is recommended a most suitable brazing filler metal for Zircaloy-4.

• Journal of the Korean Society of Costume
• /
• v.52 no.6
• /
• pp.165-179
• /
• 2002

This paper begins with the thesis that the so-called 'Be Slow' Movement has not only affected the contemporary life style but also the current fashion trend in the West as well as in Korea. The influence of the 'Be Slow' Movement on the everyday life of Western and Korean society can be documented by recent books, news reports, and many articles from various kinds of mass media and fashion magazines since the year 2000. The results of this study can be summarized as follows. First. the 'Be Slow' Movement is a new cultural phenomenon and very different from that of the past century. It has emerged very recently and it could affect the life style o( its followers for a long period of time. Second, the influence of 'Be Slow' Movement on everyday life can be witnessed in many behavioral choices. such as the preference of organic food and natural cooking for food and the preference of rural life and a green patch of land for housing. Some aspects of the way of rearing the children and long-term planning of one's life are also under the influence of 'Be Slow' Movement. In a way. the life style Proposed by the 'Be Slow' Movement is somewhat similar to that of 'Bobos'. Third, the influence of 'Be Slow' Movement on the current fashion trend can be observed in the appreciation of time-consuming labour and increased usage of D.I.Y. clothing. The higher value of fashion goods with handcrafted part or scarce luxury item are good examples of the influence by the 'Be Slow' Movement. One can say that the 'Be Slow' Movement is not retrogression, but a re-creation of time and space to be grateful for one's life. Thus, it is not anti-technology but a commercialism with technology in order to enhance the quality of life and to place people in the center of production and consumption. Consequently, one may say that the 'Be Slow' Movement is a appropriate and affluent way of living.