• 한국통신학회논문지
• /
• 제36권9B호
• /
• pp.1082-1091
• /
• 2011

DVFS (Dynamic Voltage and Frequency Scaling) 에 기초한 저전력 기법은 배터리를 사용하는 모바일 장치에서 동작시간 향상을 위하여 매우 중요하다. 본 연구에서는 DVFS기법에 기반을 둔 영상디코더의 에너지 소비를 최소화핸 스케줄링 알고리즘을 제안 한다 특히, 기존연구에서 간과된 디코더와 디스플레이 사이에 위치한 버퍼의 크기 제약을 모델에 포함하여 버퍼 넘침을 방지 하도록하며, 이 모델에서 수학적으로 에너지를 최소화하는 알고리즘을 제안하고 증명하였다. 실제 영상을 통한 시뮬레이션 결과 버퍼의 크기가 10 프레임정도에서 이득이 포화상태가 되며, 제안된 알고리즘이 기존의 직관적인 알고리즘들에 비하여 평균 10% 정도의 전력소모 절약을 얻을 수 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.81-89
• /
• 2008

This paper is concerned with the development of the piezoelectric energy harvesting(PEH) device for ubiquitous sensor node(USN). The USN needs auxiliary power to lengthen its operational life. In this study, the piezoelectric energy harvesting system consisting of a cantilever with a tip mass and piezoelectric wafer was investigated in detail both theoretically and experimentally. The dynamic model for the addressed system was derived using the assumed mode method. The resulting equations of motion were expressed in matrix form, which had never been developed before. The power output characteristics of the PEH was then calculated and discussed. Various experiments were carried out to investigate the charging characteristics of electrical components. Theoretical and experimental results showed that the PEH was able to charge a battery with ambient vibrations but still needed an effective mechanism which can convert mechanical energy to electrical energy and an optimal electric circuit which dissipates small energy.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.42-48
• /
• 2014

The auxiliary-feed-water pump (AFWP) used to supply water during a station black out situation at nuclear power plants should meet the seismic qualification regulations stipulated in IEEE Std 323 and 344, so as to withstand earthquakes or dangerous situations. Here, we establish a model for the estimation of the structural integrity of this type of pump. If the natural frequency that results from a modal analysis is less than 33 Hz, we adopt a dynamic analysis, instead of a static analysis. A dynamic analysis was carried out taking into consideration seismic conditions such as the floor response spectra (FRS), an operation-base earthquake (OBE), and a safe-shutdown earthquake (SSE). Finally, an analytical estimation of the structural integrity of an AFWP is made through a comparison of calculated values and allowable values. If the result is less than the allowable stress, the pump is deemed to have good structural integrity. In addition, future studies will involve a stability check for rotor accidents that may occur during the operation of the pump.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.632-641
• /
• 2008

This paper is concerned with the development of the piezoelectric energy harvesting(PEH) device for ubiquitous sensor node(USN). The USN needs auxiliary power to lengthen its operational life. In this study, the piezoelectric energy harvesting system consisting of a cantilever with a tip mass and piezoelectric wafer was investigated in detail both theoretically and experimentally. The dynamic model for the addressed system was derived using the assumed mode method. The resulting equations of motion were expressed in matrix form, which had never been developed before. The power output characteristics of the PEH was then calculated and discussed. Various experiments were carried out to investigate the charging characteristics of electrical components. Theoretical and experimental results showed that the PEH was able to charge a battery with ambient vibrations but still needed an effective mechanism which can convert mechanical energy to electrical energy and an optimal electric circuit which dissipates small energy.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2013

This paper describes the coordinated droop control method for stand-alone type DC micro-grid to improve reliability and utilization of distributed generations and energy storage. The stand-alone type DC micro-grid consists of several distributed generations such as a wind power generation, solar power and micro-turbine, and energy storage. The proposed method which is based on autonomous control method shows high reliability and stability through coordinated droop control of distributed generations and energy storage and also capability of battery management. The operation of stand-alone type DC micro-grid was analyzed using detail simulation model with PSCAD/EMTDC software. Based on simulation results, a hardware simulator was built and tested with commercially available components and performance of system was verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.228-230
• /
• 2002

Recently, electric power reliability of our country has been improved. However, there are still remaining problems which are short-duration variations like instantaneous and momentary interruption and voltage sag by nature calamity ; typhoon, lightning, snow, etc. Besides, power quality ; harmonics, caused by using power electronics equipments, become a hot issue Malfunction of controller and stop machinery, and losing the important data are caused by poor power quality at a couple of second. Due to those, UPS, which is made up battery, has being used, but there are several disadvantages ; long charge and discharge time, environmental problem by acid and heavy metal, and short life time. As generally know, micro-SMES is a method to settle those mentioned. However, there need huge system apparatuses in order to verify the effect of system efficiency and stability considering the size of micro-SMES, the sort of converter type, and various conditions ; inner temperature, magnetic field, quench characteristic of micro-SMES, and etc. In this paper, in order to bring the mentioned above to a settlement, a micro-SMES is modeled with characteristics of micro-SMES is interfaced to EMTOC program using Fortran program interface method. We obtained hopeful answers and made the simulation model of micro SMES.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(D)
• /
• pp.360-365
• /
• 2010

In this paper, we present a distributed algorithm for detecting dynamic event regions in wireless sensor network with the consideration on energy saving. Our model is that the sensing field is monitored by a large number of randomly distributed sensors with low-power battery and limited functionality, and that the event region is dynamic with motion or changing the shape. At any time that the event happens, we need some sensors awake to detect it and to wake up its k-hop neighbors to detect further events. Scheduling for the network to save the total power-cost or to maximize the monitoring time has been studied extensively. Our scheme is that some predetermined sensors, called critical sensors are awake all the time and when the event is detected by a critical sensor the sensor broadcasts to the neighbors to check their sensing area. Then the neighbors check their area and decide whether they wake up or remain in sleeping mode with certain criteria. Our algorithm uses only 2 bit of information in communication between sensors, thus the total communication cost is low, and the speed of detecting all event region is high. We adapt two kinds of measure for the wake-up decision. With suitable threshold values, our algorithm can be applied for many applications and for the trade-off between energy saving and the efficiency of event detection.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.827-830
• /
• 2006

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. In the generality of cases, these energy harvesting systems are used in the piezoelectric materials as mechanisms to convert mechanical vibration energy into electric energy. Through the piezoelectric materials, the ambient vibration energy could be used to prolong the power supply or in the ideal case provide endless energy f9r the devices. Therefore, the piezoelectric power harvesting cantilever beam is developed. Also, the output voltage and power are predicted in this study. We also discuss the developing system of the piezoelectric energy scavenger. An experimental verification of the model is also performed to ensure its accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4527-4547
• /
• 2018

Signcryption is a cryptographic primitive that provides authentication (signing) and confidentiality (encrypting) simultaneously at a lower computational cost and communication overhead. With the proposition of certificateless public key cryptography (CLPKC), certificateless signcryption (CLSC) scheme has gradually become a research hotspot and attracted extensive attentions. However, many of previous CLSC schemes are constructed based on time-consuming pairing operation, which is impractical for mobile devices with limited computation ability and battery capacity. Although researchers have proposed pairing-free CLSC schemes to solve the issue of efficiency, many of them are in fact still insecure. Therefore, the challenging problem is to keep the balance between efficiency and security in CLSC schemes. In this paper, several existing CLSC schemes are cryptanalyzed and a new CLSC scheme without pairing based on elliptic curve cryptosystem (ECC) is presented. The proposed CLSC scheme is provably secure against indistinguishability under adaptive chosen-ciphertext attack (IND-CCA2) and existential unforgeability under adaptive chosen-message attack (EUF-CMA) resting on Gap Diffie-Hellman (GDH) assumption and discrete logarithm problem in the random oracle model. Furthermore, the proposed scheme resists the ephemeral secret leakage (ESL) attack, public key replacement (PKR) attack, malicious but passive KGC (MPK) attack, and presents efficient computational overhead compared with the existing related CLSC schemes.

• Journal of Information Technology Applications and Management
• /
• 제24권4호
• /
• pp.93-115
• /
• 2017

The ability of smartphones to facilitate various services like mobile banking, e-commerce and mobile payments has made them part of consumers' lives. Conjoint analysis (CA) is a marketing research approach used to assess how consumers' preferences for products or services develop. The potential applications of CA are numerous in consumer electronics, banking and insurance services, job selection and workplace loyalty, consumer packaged goods, and travel and tourism. Choice-Based Conjoint (CBC) analysis is the most commonly used CA approach in marketing research. The purpose of this study is to utilise CBC analysis to investigate the relative importance of smartphone attributes that influence consumer smartphone preference. An experiment was designed using Sawtooth CBC Software. 326 students attempted the online survey. Utility values were derived by Hierarchical Bayes (HB) estimation and used to explain consumers' smartphone preferences. All the six attributes used for the study were found to significantly influence smartphone preference. Smartphone brand was the most important, followed by the price, camera, RAM, battery life, and storage. This study is one of the first to use Sawtooth CBC analysis to assess consumer smartphone preference based on the six attributes. We provide implications for the development of new smartphones based on attributes.