• Journal of Communications and Networks
• /
• 제12권5호
• /
• pp.480-491
• /
• 2010

Along with the wide acceptance of IEEE 802.11 wireless local area network (WLAN), new applications such as Internet protocol (IP) telephony over WLAN are fast emerging today. For battery-powered IP phone devices, the life time extension is a key concern for the market acceptance while today's 802.11 is not optimized for snch an operation. In this paper, we propose a novel idle mode operation, which comprises paging, idle handoff, and delayed handoff. Under the idle mode operation, a mobile host(MH) without any active session does not need to perform handoff within a predefined paging area (PA). Only when it enters a new PA, an idle handoff is performed. The proposed idle mode allows an MH without traffic to extend its life time. We develop a new analytical model in order to comparatively evaluate our proposed scheme. The numerical resnlts demonstrate that the proposed scheme outperforms the existing schemes with respect to power consumption.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.402-403
• /
• 2011

This paper presents an active and reactive power compensator for the wind power system with multi-polar synchronous generator. The proposed compensator is composed of a charge/discharge PWM converter and battery. The output power of a wind power system changes irregularly according to the variation of wind speed. The developed system is able to continuously compensate the active and reactive power. The operational feasibility of the proposed model was verified by simulations with PSCAD/EMTDC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.155-156
• /
• 2017

본 논문에서는 단일 셀과 배터리 팩의 전기적 특성 실험 기반 내부 파라미터를 추출하고 등가회로 모델에 적용하여 시뮬레이션 및 검증을 진행하였다. 본 논문에서는 임의로 선정한 단일 셀에 대한 파라미터를 추출하여 스크리닝이 이상적으로 되었다는 가정 하에 팩 단위로 확장한다. 단일 셀에서 확장된 파라미터와 배터리 팩 자체의 파라미터를 구하여 시뮬레이션 결과를 실제 전압과 비교하여 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1033_1034
• /
• 2009

본 논문에서는 과도특성을 포함한 연료전지 모델을 입력전원으로 파라미터를 변화시키면서 시뮬레이션을 수행하고 DC전원 입력의 시뮬레이션 결과와 비교하여 과도특성이 부하 에너지와 공급 에너지의 불균형에 미치는 영향을 수치적으로 나타내었다. 또한, 자동차 주행패턴으로부터 부하 수요 에너지를 유도하고 연료전지 모델과 PCS 연동시뮬레이션 결과를 통해 배터리 용량의 최적설계기법을 기술한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.610-614
• /
• 2004

Recently, an active-clamp, full-bridge boost converter has been actively studied for high-power applications such as power factor correction and battery discharger. However, DC and AC modeling for this converter has not conquered. In this paper, a DC and small-signal AC modeling for the active-clamp, full-bridge boost converter is described. Based on the operation principle, the ac part of the converter can be replaced by a do counterpart. Then, a conceptual equivalent circuit is derived by rearranging the switches. The equivalent circuit for this converter consists of CCM (Continuous conduction mode) boost and DCM (Discontinuous conduction mode) buck converter. The analyses for the equivalent CCM boost and DCM buck converter are done using the model of PWM switch. The theoretical modeling results are confirmed through experiment or SIMPLIS simulation.

• 소성∙가공
• /
• 제13권4호
• /
• pp.307-318
• /
• 2004

Rectangular drawn case with extreme aspect ratio is widely used for electrical parts such as a lithium-ion battery container, semi-conductor case and so on. Additionally, from the recent trend towards miniaturization of the multi-functional mobile device, demands for rectangular case with the narrow width are increased. In this study, numerical and experimental approaches for the multi-stage deep drawing process have been carried out. Based on the research results of the width of 5.95mm model, finite element analysis for storage case of rectangular cup type was verified to the width of 4.95mm. Also, a series of manufacturing experiments for rectangular case is conducted and the deformed configuration of the rectangular drawn case are investigated by comparing with the results of the numerical analysis. And the modification of the initial blank is performed to minimize the trimmed material amount. By the application of the modified blank, the sound shape of the deformed parts is improved.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.390-392
• /
• 2011

배터리에 의해 동작하는 무선 센서로 이루어진 네트워크에서 에너지를 절약하는 메커니즘이 매우 중요하다. 본 연구에서는 클러스터 기반의 무선 센서 네트워크에서 각 센서 노드에서의 에너지 소모에 대한 모델링을 통해 에너지를 절약하면서 각 노드에서 요구되는 QoS를 인식하는 MAC 프로토콜의 조건에 대해 분석하였다. 제안된 방식을 통하여 기존에 제안된 프로토콜들의 장단점을 분석한 후에 이를 통해 무선 네트워크의 수명을 연장할 수 있는 방안을 제안하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.678-682
• /
• 1999

In this paper, we propose the algorithm which can control active power and reactive power independently in Battery Energy Storage System. The proposed algorithm is based on the instantaneous power theory that the inner product of the voltage vector and current vector represents the active power and the cross product of those represents the reactive power, and it can control active power and reactive power independently. To verify the validity of the proposed algorithm, we make model of the real power system in th KERI and simulate this algorithm. As a result of this simulation, we verified that the proposed algorithm can control active power and reactive power independently.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.70-76
• /
• 2014

The intensity of sunlight becomes lower when weather conditions change, which affects whether a solar-electric vehicle can be driven on a shady road. The power delivered by solar cells can be vary depending on the amount of shade. As a result, the battery system is often used to compensate for variations in the power delivered by solar cells. Therefore, studies of power control systems for solar-electric vehicles are required. In this paper, mathematical models for such a power control system are studied and important variables are considered. Simulation and test results show that the mathematical model and actual designs developed here would be effective when used with solar-electric vehicles.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.67-73
• /
• 2007

본 연구에서는 특정 자동차에 대한 Charging 시스템의 적합성 여부를 판별할 수 있는 충방전 Balance 시뮬레이터의 Prototype을 개발 하였다. 차량운전 환경요건에 따른 운전 패턴 등, 시뮬레이터의 구성을 위해 각종 전기부하와 이와 관련된 배터리 모델링을 하였고 실차실험을 행하여 그 데이터를 분석 정리하였다. 제안하는 모델과 분석된 데이터를 바탕으로 충방전 시뮬레이터를 개발하였고, 개발된 시뮬레이터는 정해진 차종으로 임의의 주행환경으로 운전할 때 차량의 전기에너지 공급 문제를 실차실험을 한 것과 같이 분석할 수 있다