• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1612-1618
• /
• 2021

Telegraph 제어기는 선박의 속도제어에 사용되는 장치로 선원의 안전에 매우 직접적인 영향이 미치는 기자재이다. 이에 선주는 Telegraph 제어기에 대해 매우 높은 신뢰성을 요구하고 있으며, 선급에서는 신뢰성 검증을 위한 방법으로 HILS(hardware in loop system)테스트를 도입하고 있는 추세이다. 이에, 본 논문에서는 Telegraph 제어기의 HILS 테스트를 수행하기 위한, 전기추진선박을 모델링하였다. 모델링을 위해, 전기추진터그보트의 사양을 정의하고, 배터리, 추진전동기, 선박모델 파트 등에 대해 모델링 하였다. 또한, 다양한 운전시나리오를 정의하고 이에 따라 Telegraph 제어기를 모델링하였다. 마지막으로 통합 모델에 대한 결과를 시뮬레이션을 통해 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.674-690
• /
• 2021

This study proposes a hybrid marine power system combining dual-fuel generators, a fuel cell, and Vanadium Redox Flow Batteries (VRFB). Rigorous verification and validation of the dynamic modelling and integration of the system are conducted. A case study for the application of the hybrid propulsion system to a passenger ship is conducted to examine its time-variant behaviour. A comprehensive model of the reversible and irreversible capacity degradation of the VRFB stack unit is proposed and validated. The capacity retention of the VRFB stack is simulated by being integrated within the hybrid propulsion system. Reversible degradation of the VRFB stack is precisely predicted and rehabilitated based on the predefined operational schedule, while the irreversible portion is retained until the affected components are replaced. Consequently, the advantages of the VRFB system as an on-board ESS are demonstrated through the application of a hybrid propulsion system for liner shipping with fixed routes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3523-3543
• /
• 2022

Autonomous vehicles are gradually being regarded as the mainstream trend of future development of the automobile industry. Autonomous driving networks generate many intensive and delay-sensitive computing tasks. The storage space, computing power, and battery capacity of autonomous vehicle terminals cannot meet the resource requirements of the tasks. In this paper, we focus on the task scheduling problem of autonomous driving in software-defined edge networks. By analyzing the intensive and delay-sensitive computing tasks of autonomous vehicles, we propose an emotion model that is related to task urgency and changes with execution time and propose an optimal base station (BS) task scheduling (OBSTS) algorithm. Task sentiment is an important factor that changes with the length of time that computing tasks with different urgency levels remain in the queue. The algorithm uses task sentiment as a performance indicator to measure task scheduling. Experimental results show that the OBSTS algorithm can more effectively meet the intensive and delay-sensitive requirements of vehicle terminals for network resources and improve user service experience.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.458-470
• /
• 2022

As the 4th industrial revolution progresses, the application of several cutting-edge technologies such as the Internet of Things, big data, and mixed reality (MR) in relation to autonomous ships is being considered in the maritime logistics field. The aim of this study was to apply the concept of a digital twin model based on Human Machine Interaction (HMI) including a digital twin model and the role of an operator to a ship. The role of the digital twin is divided into information provision, support, decision, and implementation. The role of the operator is divided into operation, decision-making, supervision, and standby. The system constituting the ship was investigated. The digital twin system that could be applied to the ship was also investigated. The cloud-based digital twin system architecture that could apply investigated applications was divided into ship data collection (part 1), cloud system (part 2), analysis system/ application (part 3), and MR/mobile system (part 4). A Mixed Reality device HoloLens was used as an HMI equipment to perform a simulation test of a digital twin system of an 8 m battery-based electric propulsion ship.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.807-812
• /
• 2009

In this work, we focus on the tumbling dynamics of rod-like and semi-flexible polymers in mixed flows, which vary from simple shear to pure rotation. By employing a bead-rod model, the tumbling pathways and periods are examined with a focus on the angular distribution of their orientation. Under the mixed flows, the tumbling dynamics agreed well with earlier studies and confirmed the predicted scaling laws. We found that the angular distribution deviates from that of shear flow as the flow type approaches pure rotation. Finally, we investigated the angular distribution of $\lambda$-DNA in a shear flow and found that the present numerical simulations were in quantitative agreement with the previous experimental data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2336-2341
• /
• 2011

The studies on railway vehicles equipped with various energy storage system is proceeded actively. These have a lot of advantages like the maximizing reuse of the regeneration energy, the decrease of peak power in catenary and the reduction of infrastructure costs through catenary-free travelling. This paper is focused on the development of the TPS (Train Performance Simulation) program for railway vehicles equipped with energy storage system. The battery and ultra-capacitor system are modeled using Matlab/Simulink among several energy storage systems. And the feasibility of simulation model is evaluated with the basic power distribution algorithm.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.318-321
• /
• 2003

In case, sensor system performs where it is difficult to access physically and it is in the poor environment, it is limited to communicate by using wire and installing power module in sensor system. In this paper, it suggests how information is obtained from telemetry sensor by means of inductive coupling without battery. Comparing with the telemetry sensor system of inductive coupling by the power supply, this system estimates the capacitance of sensor with high precision in using RLSE, not the process of modulation and demodulation. In order to activate this system, inductive model is used and in case of time variant parameter, telemetry sensor system which has got high rate in accuracy is implemented by using the forgetting factor.

• 한국환경성돌연변이발암원학회지
• /
• 제21권1호
• /
• pp.44-50
• /
• 2001

To identify nongenotoxic carcinogen determined as negative by ICH guideline-recommended standard genotoxicity test battery; Ames test, chromosome aberration assay, mouse lymphoma $tk^{+/-}$ assay, in vivo micronucleus assay, we picked bisphenol A as a model compound. In this study, we applied in vitro BalB/c 3T3 cell transformation assay and Syrian hamster embryo (SHE) cell transfarmation assay. Bisphenol A was treated upto $769.2 ug/m{\ell}$ in BalB/c 3T3 cells and upto $125 ug/m{\ell}$ in SHE cells. bisphenol A didn't induced morphological transformation both with one stage treatment protocol and with two stage treatment protocol. But, treated far 48 hr, Bisphenol A induced morphological transformation significantly in SHE cells.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.287-295
• /
• 2004

A performance simulator for the fuel cell hybrid electric vehicle (FCHEV) is developed to evaluate the potentials of hybridization for fuel cell electric vehicle. Dynamic models of FCHEV's electric powertrain components such as fuel cell stack, battery, traction motor, DC/DC converter, etc. are obtained by modular approach using MATLAB SIMULINK. In addition, a thermodynamic model of the fuel cell is introduced using bondgraph to investigate the temperature effect on the vehicle performance. It is found from the simulation results that the hybridization of fuel cell electric vehicle (FCEV) provides better hydrogen fuel economy especially in the city driving owing to the braking energy recuperation and relatively high efficiency operation of the fuel cell. It is also found from the thermodynamic simulation of the FCEV that the fuel economy and acceleration performance are affected by the temperature due to the relatively low efficiency and reduced output power of the fuel cell stack at low temperature.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2157-2164
• /
• 2010

Microgrid is generally defined as cluster of small distributed generators, energy storages and loads. Through monitoring and coordinated control, microgrid can provide various benefits such as reduction of energy cost, peak shaving and power quality improvement. In design stage of microgrid, system dynamic simulation is necessary for optimizing of sizing and siting of DER(distributed energy resources). As number of the system components increases, simulation time will be longer. This problem can restrict optimal design. So we used simplified modeling on energy sources and average switching model on power converters to reduce simulation time. The effectiveness of this method is verified by applying to prototype microgrid system, which is consist of photovoltaic, wind power, diesel engine generators, battery energy storage system and loads installed in laboratory. Simulation by Matlab/Simulink and measurements on prototype microgrid show that the proposed method can reduce simulation time not sacrificing dynamic characteristics.