• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.517-527
• /
• 2021

While the two principles of lean manufacturing and time-driven activity-based costing (TDABC) have been established out of multiple incentives and do not follow the same particular targets, there is substantial commonality between them. In these conditions, the supply management of a multi-product system needs a rigorous production model to minimize costs. In this sense, this paper proposes an interactive model with the consideration of optimizing product-mix decisions using both lean development tools and TDABC. This paper proposes a qualitative approach using the case study of the Iraqi state company for battery production. The suggested model decreased manufacturing time and costs, along with some substantial reduction in idle production capacity by 26 percent in 2019, based on the findings of the case study. On the other hand, the proposed model gives two side advantages: an efficient division of costs on goods due to the use of time spent as a cost factor for products and cost savings due to the introduction of the lean manufacturing approach that reduces all additional costs and increases product-mix decisions. Furthermore, the analytical data gathered here suggests that the incorporation of lean management concepts and TDABC has a strong and important influence on product-mix decisions.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3813-3820
• /
• 2014

최근 전기 사용량이 증가하면서 전력수요와 공급능력의 불균형으로 인하여 전력예비율은 점차 감소되고 있으며, 전력 공급의 신뢰성도 떨어지고 있다. 이러한 배경 하에 전기저장장치(Battery Energy Storage System)는 수요관리의 유력한 수단 가운데 하나로써 중요성이 점차 부각되고 있다. 하지만, 이차전지를 이용한 전기저장장치는 아직 고가이므로 전력계통에 도입하여 운용하기 위해서는 경제성 평가가 필수적이다. 따라서, 본 논문에서는 전력회사용 BESS의 경제성평가를 위하여 BESS를 고려한 전원베스트믹스와 축사근사법을 이용하여, BESS의 도입 전 연간 운용비용과 BESS의 도입 후 연간 운용비용을 비교하여 최적의 BESS 도입용량과 도입비용을 산정하는 알고리즘을 제안하였다. 또한, 수용가용 BESS의 경제성평가에서는 피크세이빙 및 부하평준화 기능을 통하여 수용가의 기본전기요금과 사용량전기요금을 감소시켜 최대한의 메리트를 추구하는 경제성평가 알고리즘을 제시하였다. 제안한 알고리즘을 이용하여, 모델 전력계통과 수용가(교육기관)를 대상으로 BESS의 경제성을 분석하여, 본 논문에서 제시한 알고리즘의 유용성을 확인하였다.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.44-47
• /
• 2006

One of the critical issues in a sensor network concerns the detection of changes in data streams. Recently presented change detection schemes primarily use a sliding window model to detect changes. In such a model, a distance function is used to compare two sliding windows. Therefore, the performance of the change detection scheme is greatly influenced by the distance function. With regard to sensor nodes, however, energy consumption constitutes a critical design concern because the change detection scheme is implemented in a sensor node, which is a small battery-powered device. In this paper, we present a comparative study of various distance functions in terms of execution time, energy consumption, and detecting accuracy through simulation of speech signal data. The simulation result demonstrates that the Euclidean distance function has the highest performance while consuming a low amount of power. We believe our work is the first attempt to undertake a comparative study of distance functions in terms of execution time, energy consumption, and accuracy detection.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.192-197
• /
• 2005

This paper presents a development of the auxiliary power supply simulator for a electric rolling stock. An auxiliary power supplies are required for operating air conditioning units, ventilation fans, lighting and battery charging. Traditionally this function has been fulfilled by Motor-Alternator sets. In recent years, high performance of semiconductor and micro processor, availability and price have made three phase voltage source inverters as an attractive alternative to MA Sets. From the baseline model of the SIV(Static InVerter) for electric rolling stock, we designed the scale down model of the auxiliary power supply simulator consisting of an IGBT three phase voltage source inverter. The auxiliary power supply simulator can be used educatory purpose for training efficiently about operating principles of SIV.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.593-600
• /
• 2016

The solar array regulator for low earth orbit satellites controls a operating point of solar array for suppling electric power to the battery and the other units. Because the control object is reversed, the new approach for large and small signal analysis is needed despite using buck-converter for power stage. In this paper, the steady state analysis of solar array regulator is performed in continuous conduction mode and discontinuous conduction mode, and the border condition for each mode is established. Also, the small signal model of solar array regulator is established in discontinuous conduction mode. Experiments are carried on in worst condition which the solar array regulator can face with discontinuous conduction mode. The results show that the solar array regulator is in stable.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.25-35
• /
• 1995

For information processing tasks, it is an important cognitive skill to manipulate and store information, which is known as information intake. One of the tasks which greatly involve this skill would be a spreadsheet calculation task. In this study, a spreadsheet calculation task is analyzed by the cognitive task analysis based on the cognitive factors having been usef for a model of human information processing. By the results of the cognitive task analysis, the spreadsheet calculation tasks to be used in the experiments are designed and the testbattery of cognitive abilities assessment (CCAB ; complex cognitive asssessment battery) are selected. Then, the features of cognitive demands and a human performance model of the spreadsheet calculation task are suggested by means of correlation analysis, principal component factor analysis, and regression analysis of the results of the experiments on task performances and the assessment of cognitive abilities. Also, the application of the results of the study to job placement and further research issues are described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.889-894
• /
• 2005

This paper describes the development of the auxiliary power supply simulator for electric rolling stock. Auxiliary power supplies are required for operating air conditioning units, ventilation fans, lighting and battery charging. From the baseline model of the SIV(Static InVerter) for electric rolling stock, we designed the scale down model of the auxiliary power supply simulator consisting of IGBT voltage source inverter. Auxiliary power supply simulator can be used educatory purpose to teach efficiently about operating principles of SIV

• 한국세라믹학회지
• /
• 제22권5호
• /
• pp.23-28
• /
• 1985

A model for degradation of $eta$-$Al_2O_3$ is derived from sress generated by Poiseuille pressure capillary effect and effulent flux in charging process of Na-S Battery. Critical current density for degradation increase with increasing the crack length and crack tip radius. radius 10-7cm and crack length 10-5cm Dependence of crack growth velocity on crack lengh is seperated two regions that is for a large crack length it is predominated by Poiseuille pressure and effulent fluex but in the case of small crack length it is controlled by capillary effect.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.27-33
• /
• 2013

The inlet flow of centrifugal blower were quantitatively visualized using particle image velocimetry. Because the centrifugal blower system is one of the key parts of EV battery cooling system, the quantitative information of flow field of centrifugal blower is important to design and optimize the cooling system. Two types of inlet parts were used in this study. One is the straight inlet and the other is a bended one. The results showed the flow asymmetry exists in the straight model due to the pressure difference in the blower. In case of the bended one, the separation bubble and the increase of head loss appeared compared with the straight model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.