• 한국재료학회지
• /
• 제12권4호
• /
• pp.240-247
• /
• 2002

Tin oxide thin films doped with silicon as anodes for lithium secondary battery were fabricated by R.F. magnetron sputtering technique. The electrochemical results showed that the irreversible capacity was reduced during the first discharge/charge cycle, because the audition of silicon decreased the oxidic state of Tin. Capacity was increased with the increase of substrate temperature, however decreased with the increase of RTA temperatures. The reversible capacity of thin films fabricated under the substrate temperature of $300^{\circ}C$ and the Ar:$O_2$ratio of 7:3 was 700mA/g.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.529-536
• /
• 2005

This paper presents a novel design of a fuzzy control strategy (FCS) based on torque distribution for parallel hybrid electric vehicles (HEVs). An empirical load-regulating vehicle operation strategy is developed on the basis of analysis of the components efficiency map data and the overall energy conversion efficiency. The aim of the strategy is to optimize the fuel economy and balance the battery state-of-charge (SOC), while satisfying the vehicle performance and drivability requirements. In order to accomplish this strategy, a fuzzy inference engine with a rule-base extracted from the empirical strategy is designed, which works as the kernel of a fuzzy torque distribution controller to determine the optimal distribution of the driver torque request between the engine and the motor. Simulation results reveal that compared with the conventional strategy which uses precise threshold parameters the proposed FCS improves fuel economy as well as maintains better battery SOC within its operation range.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.60-62
• /
• 2007

The open circuit voltage (OCV) is widely used to estimate the state of charge (SOC) in many estimation algorithms. However, the relationship between the OCV and SOC can not be exactly same for all batteries. Because the conventional OCV-SOC differs between batteries, there is a problem that the relationship of the OCV-SOC should be measured to accurately estimate the SOC. Therefore, the conventional OCV-SOC is modified to a new relationship in this paper. Thus, problems resulting from the defects of the extended Kalman filter (EKF) can be avoided by preventing the relationship from varying. In this paper, SOC and capacity of the lithium-ion battery are estimated using the dual EKF with the proposed method.

• Advances in Energy Research
• /
• 제4권1호
• /
• pp.47-68
• /
• 2016

A well designed hybrid power system (HPS) can deliver electrical energy in a cost effective way. In this paper, model for HPS consisting of photo voltaic (PV) module and wind mill as renewable energy sources (RES) and solar lead acid battery as storage device connected to unidirectional grid is developed for peak demand reduction. Life time energy cost of the system is evaluated. One year hourly site condition and load pattern are taken into account for analysing the HPS. The optimal HPS is determined for least life time energy cost subject to the constraints like state of charge of the battery bank, dump load, renewable energy (RE) generation etc. Optimal solutions are also found out individually for PV module and wind mill. These three systems are compared to find out the most feasible combination. The results show that the HPS can deliver energy in an acceptable cost with reduced peak consumption from the grid. The proposed optimization algorithm is suitable for determining optimal HPS for desired location and load with least energy cost.

• International journal of advanced smart convergence
• /
• 제1권1호
• /
• pp.52-56
• /
• 2012

As inexhaustible clean energy, solar energy will be the most ideal green energy in the 21st century. The effective method to convert solar energy into electrical energy is by solar photovoltaic power generation technologies. LED Emitting Diode is a kind of component which can transform electricity into visible light. As the smart current control system for photovoltaic street lights, the proposed system has improved the battery charging and discharging mechanism to extend the lifespan and effectively controls the LED discharge current according to battery charge state and lighting.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1140-1147
• /
• 2012

This paper proposes the power management technology for stand-alone PV system to extend installation environment and coverage. The proposed power management technology in this paper can protect battery safeness from overcharge/discharge with keeping the proper SOC(State of Charge) and extend using time of system through estimation of operating power. The proposed power management technology in this paper is applied to Infra-free Variable Message Sign. And performance of power management technology in this paper was verified using simulation scenario.

• 전력전자학회논문지
• /
• 제21권5호
• /
• pp.388-395
• /
• 2016

Electric vehicles (EV) and hybrid EVs (HEV) are designed and manufactured by GM, Toyota, Honda, and Hyundai motors. The propulsion system design process for EV requires integrating subsystem designs into an overall system model to maximize the performance of a given propulsion architecture. Therefore, high-power density and high-torque density are important attributes required for EV applications. To improve torque and power density, propulsion motors are designed for saturation during high-torque operation. The nonlinearity associated with core saturation is modeled by incorporating the cross-coupling inductances, which also behave nonlinearly. Furthermore, in EV environments, the battery is directly connected to the DC link, and the battery changes depending on the state of charge. It will be onerous if as many optimal current commands as different $V_{dc}$ were made. This paper presents the optimal current commands in the various operating condition and the current control technique in EV environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.410-413
• /
• 2004

In this paper, a simulator system for Fuel Cell Hybrid Electric Vehicles(FCHEV) is implemented using DSP boards with CAN bus. The subsystems of a FCHEV i.e., the fuel cell system, the battery system, the vehicle dynamics with the transmission mechanism are coded into 3 DSP boards. The power distribution control algorithm and battery SOC control are also coded into a DSP board. The real-time monitoring program is also developed to examine the control performance of power control and SOC control algorithms.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.122-133
• /
• 2014

This paper deals with the rapid charger which is the mid-type between the slow and fast chargers in the aspect of charging time. In its functions, it can perform the Active Power Filter(APF) function without changing the topology besides the charging function. In addition, to perform the charging and APF function, this paper proposes the mode selection algorithm. The operation of the charger that has APF function and the mode selection algorithm are verified by the simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.299-300
• /
• 2012

본 논문에서는 납 축전지를 사용하는 산업용 전기차량의 SOC(State Of Charge)를 별도의 BMS(Battery Management System)장치 없이 추정하는 방법에 대해 기술한다. SOC를 추정하기 위한 기존의 전통적인 방법들 중 전력을 적산하는 방법(Ampere hour counting)이 널리 사용되는데 이는 장치의 내, 외적인 요인에 의해 발생한 오차가 누적될 수 있다. 배터리의 전압을 측정하여 SOC를 추정하는 OCV(Open Circuit Voltage) 방법은 배터리가 안정 상태에 도달하기까지 충분한 휴지 시간이 필요해 실시간으로 적용하기 힘들다. 이 외에 칼만 필터를 이용하는 방법은 시스템을 정확히 모델링해야 하고 계산이 복잡하다는 단점이 있다. 본 연구에서는 전력을 적산하는 방법을 기본으로 하고 배터리의 전압을 적절히 이용하여 누적되는 오차를 보정하는 방법을 제안한다. 제안한 방법에 대해 시뮬레이션 하고 실제로 산업용 차량인 AC 전동 지게차로 실험하여 그 타당성을 검증 하였다.