• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.116-122
• /
• 2016

Recently, the production cycle in manufacturing process has been getting shorter and different types of product have been produced in the same process line. In this case, the control chart using coefficient of variation would be applicable to the process. The theory that random variables are located in the three times distance of the deviation from mean value is applicable to the control chart that monitor the process in the manufacturing line, when the data of process are changed by the type of normal distribution. It is possible to apply to the control chart of coefficient of variation too. ${\bar{x}}$, s estimates that taken in the coefficient of variation have just used all of the data, but the upper control limit, center line and lower control limit have been settled by the effect of abnormal values, so this control chart could be in trouble of detection ability of the assignable value. The purpose of this study was to present the robust control chart than coefficient of variation control chart in the normal process. To perform this research, the location parameter, ${\bar{x_{\alpha}}}$, $s_{\alpha}$ were used. The robust control chart was named Tim-CV control chart. The result of simulation were summarized as follows; First, P values, the probability to get away from control limit, in Trim-CV control chart were larger than CV control chart in the normal process. Second, ARL values, average run length, in Trim-CV control chart were smaller than CV control chart in the normal process. Particularly, the difference of performance of two control charts was so sure when the change of the process was getting to bigger. Therefore, the Trim-CV control chart proposed in this paper would be more efficient tool than CV control chart in small quantity batch production.

• Management Science and Financial Engineering
• /
• 제11권2호
• /
• pp.19-43
• /
• 2005

This paper considers a variation of the customer order scheduling problem, and the variation is the case where the machine-job assignment is fixed. We examine the parallel machine environment, and the objective is to minimize the sum of the completion times of the batches. While a machine can process only one job at a time, different machines can simultaneously process different jobs in a batch. The recognition version of this problem is known to be NP-complete in the strong sense even if there exist only two parallel machines. When there are an arbitrary number of parallel machines, we establish three lower bounds and develop a dynamic programming (DP) algorithm which runs in exponential time on the number of batches. We present two simple but intuitive heuristics, SB and GR, and find some special cases where SB and GR generate an optimal schedule. We also find worst case upper bounds on the relative error. For the case of the two parallel machines, we show that GR generates an optimal schedule when processing times of all batches are equal. Finally, the heuristics and the lower bounds are empirically evaluated.

• 상하수도학회지
• /
• 제28권4호
• /
• pp.453-459
• /
• 2014

The excessive concentration of phosphorus in the river and reservoir is a deteriorating factor for the eutrophication. The converter slag was used to remove the phosphate from the synthetic wastewater. Influencing factors were studied to remove soluble orthophosphate with the different particle sizes through the batch and the column experiments by continuous flow. Freundlich and Langmuir adsorption isotherm constants were obtained from batch experiments with $PS_A$ and $PS_B$. Freundlich isotherm was fitted better than Langmuir isotherm. Regression coefficient of Freundlich isotherm was 0.95 for $PS_A$ and 0.92 for $PS_B$, respectively. The adsorption kinetics from the batch experiment were revealed that bigger size of convert slag, $PS_A$ can be applied for the higher than 3.5 mg/L of phosphate concentration. The pilot plant of continuous flow was applied in order to evaluate the pH variation, breakthrough points and breakthrough adsorption capacity of phosphate. The variation of pH was decreased through the experimental hours. The breakthrough time was 1,432 and 312 hours to 10 mg/L and 50 mg/L for the influent concentration, respectively. The breakthrough adsorption capacity was 3.54 g/kg for 10 mg/L, and 1.72 g/kg for 50 mg/L as influent phosphate concentration.

• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.43-48
• /
• 2009

본 연구에서는 소규모 처리공법으로서 질소와 인을 효율적으로 제거할 수 있으며, 관리 및 운전이 용이한 연속회분식반응조(SBR)공정의 영양염류 제거특성에 대하여 연구하였다. 특히, 질소의 탈질 및 인의 과잉섭취에 영향을 미치는, 무산소구간의 반복횟수에 따라 변화하는 용존산소, COD, 질소 및 인의 반응특성을 파악하여 SBR공정의 무산소-호기 구간반복에 따른 운전특성을 파악하고자 하였다. 이에 호기-무산소구간을 1~4회 반복하여 Run 1~4의 실험을 수행한 결과, 무산소구간의 반복횟수가 많아질수록 탈질을 위한 낮은 용존산소 유지가 어려운 것으로 나타났다. COD 제거율의 경우 운전에 상관없이 모두 91% 이상의 양호한 결과를 나타냈으나, 추가적인 무산소구간이 없을 때 효율이 약간 더 우수하였다. 질소제거에 있어서는 무산소구간이 2회 및 3회 반복되었을 때 약 68%의 높은 제거율을 나타냈으며, 배출되는 질소의 구성은 99% 이상이 $NOX^--N$ 이었다. 인 제거에 있어서는 무산소구간이 1회~3회 반복되었을 때 약 40%의 양호한 제거효율을 나타냈다.

• Nuclear Medicine and Molecular Imaging
• /
• 제43권4호
• /
• pp.323-329
• /
• 2009

목적: 방사면역측정법 및 면역방사계수법은 매 실험마다 표준용액을 넣고 표준곡선에 대비하여 결과를 산출하는 batch assay가 일반화되어 있다. 비용과 시간에 대한 효율성을 증가 시키기 위해서는 선행 표준 곡선을 이용하여 검사를 진행하는 random assay의 적용이 요구된다. 방사면역측정법 및 면역방사계수법에서 자동분주기를 이용한 random assay적용 가능성을 평가 하기 위해 본 연구를 수행하였다. 대상 및 방법: Triiodothyronine (T3), free thyroxine (fT4), Prostate specific antigen (PSA), Carcinoembryonic antigen (CEA) 4가지 항목을 대상으로 하였으며 각 검사별 20명의 환자 검체를 이용하였다. 각 검사 항목별로 표준곡선을 얻기 위해 3시간 간격으로 4회 측정한 표준용액의 분당계수값(counter per minute, cpm)을 측정하였다. 이를 Friedman test를 이용하여 비교하여 검사시 마다 얻는 표준 곡선간의 차이를 평가하였다. 각 검사별 저, 중, 고농도의 대조 용액을 이용하여 5회 측정하고 이를 Friedman test를 이용하여 비교하여 측정 내 정밀도를 평가하였다. 각 검사별 저, 중, 고농도의 대조용액을 batch assay와 자동분주기를 이용한 random assay로 3시간 간격으로 각각 4회 측정하였다. 측정값을 바탕으로 평균, 표준 편차, 변이계수를 구하고 Wilcoxon test를 이용하여 비교하여 assay 방법에 따른 차이를 비교하였다. 두 assay간에 일치도(agreement)를 평가하기 위해 두 assay의 측정값 사이에 급내상관계수(Intraclass correlation coefficient, ICC)와 상관계수를 계산하였다. 결과: 모든 검사항목에서 표준 용액의 분당계수값은 측정 간에 통계적으로 유의한 차이가 없었다. T3, fT4, PSA, CEA 검사항목마다 측정한 저, 중, 고농도별 측정 내 변이계수는 T3(3.6%, 2.6%, 0.9%), fT4(4.5%, 1.1%. 1.3%), PSA(3.9%, 3.1%, 1.2%), CEA(5.0%, 4.8%, 7.6%)였다. 검사 항목별 측정방법에 따른 대조 용액을 이용한 표준 곡선의 측정 간 정밀도 평가에서 두 검사 방법간에 유의한 차이가 없었다. 각 검사항목별로 20명의 환자 검체에서 측정한 측정 간 변이계수(inter-assay precision)의 평균과 표준편차 값은 batch assay로 시행했을 때 각각 3.2$\pm$1.7%, 3.9$\pm$2.1%. 7.1$\pm$6.2%, 11.2$\pm$7.2%였고 random assay로 측정하였을 때는 2.7$\pm$1.7%, 4.8$\pm$3.1%, 3.6$\pm$4.8%, 7.4$\pm$6.2였다. Batch assay와 random assay는 서로 높은 일치도를 보였다. 측정한 급내상관계수(Intraclass correlation coefficient)는 T3, fT4, PSA, CEA 각각 0.9968, 0.9973. 0.9996, 0.9901였다. Batch assay로 측정한 값과 자등분주기를 이용한 random assay로 측정한 값 사이에 상관 계수(R$^2$)는 T3, fT4, PSA, CEA 각각 0.9924, 0.9974, 0.9994, 0.9989(p<0.005)로 모두 강한 상관관계를 보였다. 결론: T3, fT4, PSA, CEA 4가지 항목의 방사면역측정 법 (Radioimmunoassay)에서 기존의 batch assay와 자동분주기를 이용한 random assay간에 일치도와 상관성이 높았다. 결론적으로 자동분주기를 이용한 random assay를 방사면역측정법 및 면역방사계수법에 적절히 이용할 수 있을 것으로 생각된다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.198-204
• /
• 2005

Seeds of neem were collected from different parts of India and analyzed for their azadirachtin content by High Performance Liquid Chromatography (HPLC). In order to assess the effects of genotypic and geographical variation on azadirachtin content in cell cultures, callus development was attempted in the seeds containing high and low concentration of azadirachtin. The concentration of azadirachtin in callus cultures was significantly affected by the explant source. Seed kernels with higher azadirachtin content produced higher azadirachtin content in callus cultures and lower azadirachtin content was seen in callus cultures produced from seed kernels with low azadirachtin content. The protocol for development of elite stock culture of Azadirachta indica was established with the objective of selecting a high azadirachtin-producing cell line. The highest azadirachtin-producing cell line was selected and the effects of different media and illumination conditions on growth and azadirachtin production were studied in shake flask suspension culture. Detailed batch growth kinetics was also established. These studies provided elite starter culture and associated protocols for cultivation of A. indica plant cell culture in the bioreactor.

• 상하수도학회지
• /
• 제33권6호
• /
• pp.481-489
• /
• 2019

As aeration is an energy-intensive process, its control has become more important to save energy and to meet strict effluent limits. In this study, predictive aeration control based on the respirometric method has been applied to the sequencing batch reactor (SBR) process. The variation of the respiration rate by nitrification was great and obvious, so it could be a very useful parameter for the predictive aeration control. The maximum respiration rate due to nitrification was about 60 mg O₂/L·h and the maximum specific nitrification rate was about 7.5 mg N/g MLVSS·h. The aeration time of the following cycle of the SBR was daily adjusted in proportion to that which was previously determined based on the sudden decrease of respiration rate at the end of nitrification in the respirometer. The aeration time required for nitrification could be effectively predicted and it was closely related to influent nitrogen loadings. By the predictive aeration control the aerobic period of the SBR has been optimized, and energy saving and enhanced nitrogen removal could be obtained.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권2호
• /
• pp.117-125
• /
• 2003

To know the impact of female pupal weight corresponding to the male cocoon shell weight upon fecundity, hatchability and percentage of non-viable eggs, the experimental multivoltine breeds namely BL67 and 96A were categorised into low, medium and high batches according to the weight of female pupae and male cocoon shells and moths emerged from low, medium and high female pupae were allowed to mate withmoths emerged from low, medium and high male cocoon shells. Both the experimental breeds of BL67 and 96A revealed a fairl trend in fecundity for high batch ＞ medium batch ＞ low batch. When data were statistically analysed, a significant (p ＜ 0.05) and a highly significant (p ＜ 0.01) increase in fecundity was observed in the medium and high batches of BL67 during November - December, 2002 whereas highly significant (p ＜ 0.01) increase was observed in the high batches of 96A during November - December, 2002. Data revealed a highly significant (p ＜ 0.01) increase in fecundity in medium and high batches of both the breeds during January - February, 2003. More interestingly, a significant (p ＜ 0.05) reduction was noted in percentage of non-viable eggs in high batches of 96A during January - February, 2003. But no significant variation in hatchability was noticed due to the effect of differential female pupal weight and male cocoon shell weight.

• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.116-123
• /
• 2009

Laboratory scale experiments were conducted to investigate the removal characteristics of nitrogen and phosphorus by the variation of aeration time in four sequencing batch reactors (SBRs). In R1 which has the shortest aeration time as 1 h, MLVSS concentration in reactor decreased by the wash-out of biomass because of the poor sedimentation. The TOC removal efficiencies were almost similar in 3 reactors except R1. At the low aeration time as 1 h, the nitrification was severely inhibited by the deficiency of oxygen. ${NH_4}^+$-N removal efficiency was decreased by the decrease of aeration time. At the aeration time over 2 h, the phosphorus removal efficiency was not affected by the variation of aeration time. The nitrification was inhibited but the phosphorus release and uptake was not inhibited by the decrease of low aeration time. Therefore, we can see that the phosphorus removal microorganisms are superior to nitrification microorganisms in oxygen utilization.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.69-78
• /
• 1986

레디믹스트 콘크리트의 품질은 시멘트의 품질, 골재의 입도 및 표면수 등과 같은 사용재료의 변화에 의하여 크게 변화하므로, 사용재료의 변화상태를 신속히 파악하여 배합계산에 반영함으로써 품질변화를 최대한 방지해야 한다. 본 논문에서는 레디믹스트 콘크리트의 배합계산에 컴퓨터를 사용함으로써 재료의 변화상태에 따른 배합수정을 정확하고 신속하게 처리하여 시방배합, 현장배합 및 배치량을 계산할 수 있는 프로그램을 작성하였다.