• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.23-32
• /
• 2020

Many small and medium-sized manufacturing companies process various product types to respond different customer orders in a single production line. To improve their productivity, they often apply batch processing while considering various product types, constraints on batch sizes and setups, and due date of each order. This study introduces a batch scheduling heuristic for a production line with multiple product types and different due dates of each order. As the process times vary due to the different batch sizes and product types, a recursive equation is developed based on a flow line model to obtain the upper bound on the completion times with less computational complexity than full computation. The batch scheduling algorithm combines and schedules the orders with same product types into a batch to improve productivity, but within the constraints to match the due dates of the orders. The algorithm incorporates simple and intuitive principles for the purpose of being applied to small and medium companies. To test the algorithm, two case studies are introduced; a high pressure coolant (HPC) manufacturing line and a press process at a plate-type heat exchanger manufacturer. From the case studies, the developed algorithm provides significant improvements in setup frequency and thus convenience of workers and productivity, without violating due dates of each order.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.567-568
• /
• 2006

Generally, progressive type GMP process is more efficient than batch type because there are advantages that problems of each stage(heating, press, cooling etc.) are easily grasped and a time of production is shortened. But if single cavity is used in progressive type GMP process, there is disadvantage that productivity is decreased. So, in order to improve productivity of progressive type GMP process, it is essential to secure multi cavity mold technic. In this study, as a fundamental study to develop multi cavity used in glass lens molding, we conducted a compression test for PBK40.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.307-308
• /
• 2008

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.22-33
• /
• 2005

폐타이어 분말(GRT)을 재활용하기 위하여 sheet type 4그룹과 soft type 1그룹의 자체보수성 방수재를 제조하였다. 각각 방수재의 방수특성을 고찰하기 위하여 방수재들의 물성을 측정하였다. 방수재는 GRT/ 고흡수성수지/ binder로 구성되었으며, internal mixer로 혼합한 후 hot press로 성형하여 제조 되었다. 방수재 제조에 사용된 CRT의 평균입도는 -40mesh 이었고, 고흡수성 수지는 상용품과 poly(AM-SAS-AA)를 제조하여 사용하였고, binder는 PU, EVA, LDPE, SBR, poly(2-EHA)을 사용하였다. 또한 방수재의 물성을 향상시키기 위하여 보강재로 PU film을 사용하였다. 폐타이어 분말을 이용하여 개발된 sheet type 자체보수성 방수재 중 GRT/ CE-500F/EV-600/PU film 과 GRT/GE-500F/SBR(vulcanization)/PU film 로 구성된 방수재가 기존 상용제품의 물성에 근접하였다. 또한 soft type 방수재는 GRT/GE-500F/Poly(2-EHA)와 GRT/P(AM-SAS-AA)/Poly(2-EHA)로 구성된 방수재가 상용제품의 흡수능보다 4-20배의 개선된 결과를 나타내었다.