• 상하수도학회지
• /
• 제26권4호
• /
• pp.591-598
• /
• 2012

Denitrification is an important biological mechanism in wastewater treatment process because this process is technically to remove nitrogen from water to air. There have been lots of study about denitrification engineering and molecular biological research about denitrifying bacteria, respectively. However, combination of these researches was unusual and rare. This study is about the correlation between quantity of denitrifying bacteria and denitrification potential, and consists of NUR batch test as analysis method of denitrification potential and quantitative molecular analysis for denitrifying bacteria. Three reactors (A/O, MLE and A/O of nitrogen deficiency) are operated to get activated sludge with various denitrification potential. All samples which were acquired from reactors were measured denitrification potential by NUR test and NUiR test. Also, Real-time PCR was conducted for quantification of denitrifying bacteria composition in activated sludge. The various denitrification potentials were measured in the reactors. The denitrifiaction potential was the highest in MLE process and the reactor of the nitrogen deficiency showed the lowest. Genomic DNA of activated sludge was obtained and consequently, real-time PCRuse the primer sets of nirK and nirS　were conducted to quantify genes involving denitrification reductase production. As the result of real-time PCR, nirK gene showed more significant influence on denitrification potential comapred with nirS gene.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.601-606
• /
• 2014

본 연구에서는 선박에서 발생하는 오 폐수의 처리를 위하여 SBR공정에 유효미생물을 주입하는 변법을 이용하여 Lab scale 실험을 수행하였다. 유해물질 유입에 따른 생물학적 처리 장치의 효율 저하 문제를 해결하기 위하여 SBR공정에 유효미생물을 주입하는 변법은 크루즈선이라는 특수 환경과의 접목성과 생물학적 처리 시 야기될 수 있는 문제를 대비하기 위한 대안으로 선박환경에 매우 적합한 공정으로 평가되었다. 슬러지 관찰 결과 기존의 활성슬러지에 유효미생물의 주입함으로써 슬러지의 안정성을 확보할 수 있었으며, 슬러지의 EPS 함량도 40% 이상 높아진 것을 확인할 수 있었다. 또한 슬러지의 미생물 분석 결과 유효미생물 주입으로 인해 수처리에 유리한 미생물종이 다수 출현하여 휘발성 유기화합물과 같은 유기 유해물질이 생분해되어 안전한 물질로 전환되는 것을 확인할 수 있었으며. 중금속과 같은 무기 유해물질도 중금속의 종류와 유입농도에 영향을 받지 않고 70% 이상의 안정적인 처리 효율도 확보할 수 있는 것으로 확인되었다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.516-527
• /
• 2013

This paper presents a new overall system for state-of-available-power (SoAP) prediction for a lithium-ion battery pack. The essential part of this method is based on an adaptive network architecture which utilizes both fuzzy model (FIS) and artificial neural network (ANN) into the framework of adaptive neuro-fuzzy inference system (ANFIS). While battery aging proceeds, the system is capable of delivering accurate power prediction not only for room temperature, but also at lower temperatures at which power prediction is most challenging. Due to design property of ANN, the network parameters are adapted on-line to the current battery states (state-of-charge (SoC), state-of-health (SoH), temperature). SoC is required as an input parameter to SoAP module and high accuracy is crucial for a reliable on-line adaptation. Therefore, a reasonable way to determine the battery state variables is proposed applying a combination of several partly different algorithms. Among other SoC boundary estimation methods, robust extended Kalman filter (REKF) for recalibration of amp hour counters was implemented. ANFIS then achieves the SoAP estimation by means of time forward voltage prognosis (TFVP) before a power pulse occurs. The trade-off between computational cost of batch-learning and accuracy during on-line adaptation was optimized resulting in a real-time system with TFVP absolute error less than 1%. The verification was performed on a software-in-the-loop test bench setup using a 53 Ah lithium-ion cell.

• 분석과학
• /
• 제15권2호
• /
• pp.163-171
• /
• 2002

수산가공 폐기물로 버려지는 게 껍질로부터 chitin을 추출하여 중금속 흡착제로 이용하였으며, 이 흡착제에 대해 Cd(II) 및 Pb(II) 이온의 흡착특성을 연구하였다. Chitin에 대한 Cd(II) 및 Pb(II) 이온의 흡착속도는 반응시간 2분경에 최대흡착량에 도달하였으며, 중금속 흡착에 미치는 pH의 영향은 두 이온 모두 pH 7.0>10.5>3.5순임을 알 수 있었다. Chitin에 대한 흡착률은 Cd(II)이온이 21${\sim}$99%이며, Pb(II)이온이 24${\sim}$95%이다. Cd(II)이온의 회수율은 22${\sim}$53%이고, Pb(II)이온의 회수율은 22${\sim}$73%로 나타났다. 이들 중금속 이온의 흡착양상은 Freundlich 흡착등온식에 비교적 잘 적용되었다.

• Journal of Microbiology and Biotechnology
• /
• 제14권1호
• /
• pp.90-96
• /
• 2004

A synthetic defined medium, fortified with amino acids, was developed for the stable production of the kringle fragments of human apolipoprotein(a) (apo(a)), rhLK68. Using a complex rich medium containing yeast extract and a high-cell-density fed-batch culture, the expression level of rhLK68 reached 17% of the total cellular protein, which corresponded to $5\;g\;l^{-1}$ of the culture. To replace the complex media with chemically defined media, several amino acids that positively affect cell growth and gene expression were chosen by a statistical method. The various combinations of the selected amino acids were tested for its fortifying effect on a minimal defined medium. When glutamine only was added, the overall expression level of rhLK68 reached 93% of the complex rich medium increasing the specific expression level by 22.4% and decreasing the cell growth by 24%. Moreover, the addition of glutamine resulted in a 2-fold increase in the concentration of rhLK68 in the culture broth, compared with the minimal defined medium. The synthetic defined media developed in this study could be generally applied to high-cell-density cultures of the recombinant Escherichia coli BL21(DE3), especially for the production of therapeutic proteins that require a strict quality control of the culture media and fermentation processes.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.215-221
• /
• 2006

This research presents results from laboratory and pilot-scale experiments to remove high-nitrate in pickling wastewater using the sequencing batch reactor (SBR) as a biological method. During the experimental periods, the influent concentrations of NOx-N and $Ca^{+2}$ were analyzed to be 350-1,600 and 700-800 mg/L, respectively. In order to provide carbon source for denitrification, methanol has been added in proportion to the influent nitrate loading. The mean concentrations of MLSS and MLVSS, the fraction of volatile solids in sludge and the sludge volume index were measured to be 27 g/L, 5 g/L, 18.5% and 7.5, respectively. The solid retention time was kept in the range of 18 to 22 days, specific denitrification rate ($U_{dn}$) was $0.301g{NO_3}^--N/gVSS/day$. The oxidized nitrogen concentration of effluent ranged 2-34 mg/L with an average of 5.2 mg/L, the overall reduction in total nitrogen was more than 99.2%. In order to treat the pickling wastewater including the high concentration of nitrate and $Ca^{+2}$, the continuous flow process is not suitable because the specific gravity of the sludge is considerably increased by $Ca^{+2}$, thus the SBR process is shown to be very effective to treat the pickling wastewater.

• 공업화학
• /
• 제8권2호
• /
• pp.161-171
• /
• 1997

인쇄회로기판의 식각폐수를 전기화학적 방법을 이용하여 양극에서 이를 재생하고, 음극에서 구리를 석출하기 위한 실험을 행하였다. 양극에서의 Cu(I)의 산화에 따른 Cu(I)/Cu(II) 변화는 Pt와 Ag/AgCl/4M KCl 전극사이의 전위차를 이용하여 측정하였으며, 반응의 진행에 따른 양극에서의 염소기체 발생은 용액내에 Cu(I)의 농도를 일정치 이상으로 유지시키고, 비다공성 흑연전극을 이용하여 억제할 수 있었다. 그리고, 음극에서의 구리석출은 전류밀도 $360mA/cm^2$, 구리이온농도 12g/l 일때 가장 효율적이며 석출된 구리는 dendrite구조임을 알 수 있었다. 또한 석출효율과 회수방법을 고려할 때 음극으로서 Ti전극을 사용할 경우 가장 우수한 효율을 얻을 수 있었다. 전해온도가 증가함에 따라서 전류효율은 낮아졌으며, 전력효율은 $50^{\circ}C$에서 최대값을 나타내었다.

• 공업화학
• /
• 제21권5호
• /
• pp.548-552
• /
• 2010

본 연구는 이소프렌에서 아세틸렌 불순물을 선택적으로 제거하기 위한 효과적인 흡착제의 개발이다. 흡착제로 기공의 크기가 $4{\AA}$에서 $5{\AA}$인 제올라이트를 이용하여 아세틸렌을 흡착하여 제거하는데 기공의 크기가 미치는 영향을 살펴보았다. 제올라이트 A의 기공크기는 Na와 Ca의 조성을 변화하여 조절하였다. 특히 아세틸렌의 주성분인 2-methyl-1-butyne-3-yen (IPA)와 2-butyne의 동역학적 지름의 차이 때문에 흡착제의 기공 크기는 흡착효과에 지대한 영향을 미치게 된다. 기공의 크기가 $5{\AA}$인 흡착제는 2-butyne의 높은 흡착력을 보였으나 IPA에는 낮은 흡착력을 보였다. 흡착등온선의 경우 개선된 Langmuir 모델이 2-butyne 흡착에 대해서 가장 좋은 fitting을 보였다. 이외에도 최적의 재생 조건을 찾기 위한 실험을 수행하였고 $300^{\circ}C$에서 12 h 동안 재생하였을 때 매우 효과적이었다.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.291-301
• /
• 2017

Objectives: In order to improve the working environment and solve the complaints, many efforts have been made to remove the odor from the industrial process. There are many disposal methods to remove odor, but there are many disadvantages and inadequate applications. The Purpose of this study was to develop a bag-filer system for odor removal using powder adsorbent. Methods: The bag-filter system is composed of a shear bag filter, an absorbent spraying system and an absorbent circulation system. The spraying absorbent system was connected with the inlet duct of the shear bag filter for inputting adsorbent. And the absorbent circulation system can transport the collecting adsorbent from hoper to the inlet duct of the system. As a result, the adsorbent can remove odor with recycling in the system. Also affective factors like the powdered absorbent combination and injection method was researched for maximization of system efficiency. The study was conducted in two stages. The first step was testing equipment made and the second is to evaluate the efficiency of the odor control by connecting to the actual odor generation process. Results: Both experiment stages showed efficient odor control ability. The adsorption efficiency of the system is demonstrated and the odor was adsorbed well by the powder adsorbent. It is essential to accurately understand the characteristics of the odorous and use the appropriate adsorbent. Although the powder adsorbent was used in the experiment, the problem of scattering did not occur due to the high degree of system sealing. Also the system manufactured in this study was designed to recycle the adsorbent, so adsorbent reuse or batch processing is convenient. Conclusions: The applicability of the system has been proven through this research. Customized systems for industrial process and the appropriate adsorbent base on the characteristics of pollutant generation will show efficient odor collection ability.

• 공업화학
• /
• 제17권3호
• /
• pp.274-279
• /
• 2006

해중합 촉매인 zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$)와 lithuium hydroxide $H_{2}O$ ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$)를 용매인 ethyl alcohol (99.9%)에 용해시킨 후 분산제인 hydroxypropyl cellulose (HPC)를 첨가하여 균일하게 분산된 ZnO (산화아연) 콜로이드 용액을 졸-겔법을 이용하여 합성하였다. ZnO 입자들의 크기와 모양은 분산제인 HPC에 의해 결정되었다. 또한 나노 크기의 ZnO 입자들은 zinc-2-ethylhexagonate를 기초로 한 침천법을 이용하여 얻었다. 이렇게 얻어진 ZnO 분말을 DLS, XRD, FE-SEM, 그리고 UV-Vis를 통하여 특성 분석을 하였다. 그 결과, 산화아연 분말은 자기조립 반응으로 균일하고 육방정계 모양의 구조를 가지는 것을 볼 수 있었다. 또 평균 입자 크기는 거의 40 nm이고 균일하게 분산되었다.